GAAP allows four depreciation methods for tangible long-lived assets: straight-line, double declining balance, sum-of-the-years’ digits, and units of production. The depreciation methods allowed by GAAP are not ranked against each other. You pick the one that best reflects the pattern in which the asset’s economic benefits are consumed, then apply it consistently going forward.
Straight-Line
Straight-line is the most common method in practice and the simplest. It spreads the depreciable cost of an asset evenly across every year of its useful life. Take the asset’s cost, subtract its estimated salvage value, and divide by the number of years you plan to use it.
A machine that costs $100,000 with a $10,000 salvage value and a ten-year useful life produces $9,000 of depreciation expense every year. Cost includes everything you spend to get the asset ready for use, including shipping, installation, and testing. Salvage value is your best estimate of what the asset will be worth when you retire it.
Straight-line fits assets that deliver roughly the same benefit year after year, like office furniture, buildings, or standard computer equipment. The even expense pattern also makes income statements more predictable, which is why many companies default to straight-line when no other method clearly fits better.
Double Declining Balance
Double declining balance (DDB) is an accelerated method that front-loads expense into the early years of an asset’s life. The logic is that many assets produce more value when new and become less productive as they age. A new delivery truck runs more reliably and requires fewer repairs in its first few years than in its last.
DDB takes the straight-line rate and doubles it, then applies that doubled rate to the asset’s remaining book value each year. For a five-year asset, the straight-line rate is 20 percent, so the DDB rate is 40 percent. For a ten-year asset, the rate is 20 percent (double the 10 percent straight-line rate).
An important quirk: you don’t subtract salvage value when calculating annual depreciation. You multiply the accelerated rate by whatever book value remains at the start of each year. Because you’re always taking a percentage of a shrinking number, the expense drops every year. But the book value can never fall below the estimated salvage value. In the final year, you record whatever plug figure brings book value exactly to salvage value.
Consider a $50,000 asset with a $5,000 salvage value and a five-year life. Year one expense is $20,000 (40 percent of $50,000), leaving a book value of $30,000. Year two expense is $12,000 (40 percent of $30,000), leaving $18,000. The pattern continues until the math would push book value below $5,000, at which point you record only the amount needed to hit that floor.
Sum-of-the-Years’ Digits
Sum-of-the-years’ digits (SYD) is a gentler form of acceleration. Unlike DDB, SYD applies a declining fraction to the asset’s depreciable cost (cost minus salvage value) rather than to the remaining book value.
To build the fraction, add up the digits of the asset’s useful life. For a five-year asset: 5 + 4 + 3 + 2 + 1 = 15. That sum becomes the denominator. The numerator is the number of years remaining at the start of each period. In year one the fraction is 5/15, in year two 4/15, in year three 3/15, and so on. Each fraction is multiplied by the same depreciable base.
For a $100,000 asset with a $10,000 salvage value and a five-year life, year one expense is $30,000 (5/15 × $90,000), year two is $24,000 (4/15 × $90,000), and it tapers down from there. SYD produces a smoother decline than DDB, which can be useful when you want some acceleration without dramatic early-year spikes.
Units of Production
Units of production ties depreciation directly to how much an asset is actually used. Instead of spreading cost over time, you spread it over the total output or activity you expect from the asset. This is the right choice for equipment whose wear depends on volume rather than age.
First, calculate a per-unit rate: (cost minus salvage value) divided by total estimated lifetime output. Then multiply that rate by the units actually produced during the period. A printing press that costs $500,000, has a $50,000 salvage value, and can produce 5 million pages has a rate of $0.09 per page. If it prints 200,000 pages in a quarter, that quarter’s depreciation expense is $18,000.
The expense fluctuates with production volume. A quarter where the press sits idle produces zero depreciation. A quarter with heavy output produces more. The method is popular in manufacturing and mining, where utilization can vary dramatically from period to period. The same concept applies to natural resources: when a mining company extracts ore or a timber company harvests trees, cost is allocated based on units extracted rather than years elapsed. Accountants call this depletion rather than depreciation, but the underlying math is identical.
Choosing Among the Four Methods
GAAP doesn’t rank the methods. Management picks the one that best reflects the pattern in which the asset’s economic benefits are consumed. A fleet of delivery vehicles that lose capability steadily over time might warrant straight-line. A technology asset that becomes obsolete quickly might justify DDB. Mining equipment whose value correlates to tonnage extracted calls for units of production.
Once you’ve chosen a method for a class of assets, consistency matters. Apply the same method in each subsequent period so that financial statements remain comparable from year to year. The financial statement notes must disclose the major classes of depreciable assets, the depreciation method used for each class, total depreciation expense for the period, and accumulated depreciation balances.
Companies can also depreciate significant components of a single asset separately when those components have different useful lives. A building’s roof, HVAC system, and structural shell might each get their own depreciation schedule. Component depreciation is permitted under GAAP but not required, and it adds complexity, so it tends to show up at larger companies and in capital-intensive industries like utilities and airlines.
Changing a Method or an Estimate
Estimates change over time. If you revise an asset’s useful life or salvage value partway through its service, GAAP treats this as a change in accounting estimate. You don’t restate prior periods. You spread the remaining depreciable amount over the revised remaining life going forward.
A change in the depreciation method itself, such as switching from DDB to straight-line, is also handled prospectively under current standards. GAAP treats a method change as inseparable from a change in the estimate of how benefits are consumed, so no restatement of prior years is required and no preferability letter is needed from the auditor.
Assets That Are Not Depreciated
Not every long-lived asset gets depreciated. Land is the most important exception. Because land has an indefinite useful life, its cost stays on the balance sheet without any periodic expense. Improvements to land, though, like parking lots, fences, driveways, and outdoor lighting, do have finite lives and are depreciated separately from the land itself.
Construction in progress is another non-depreciable category. While a building or production line is being built, costs accumulate in an asset account but depreciation doesn’t begin until the project is substantially complete and ready for use. Once that threshold is crossed, the accumulated cost moves into a depreciable asset class and the clock starts.
When Depreciation Starts
Depreciation begins when the asset is available for its intended use, meaning it’s in the location and condition needed to operate the way management intends. You don’t wait until the asset actually starts producing output. If a machine is installed, tested, and ready to run on March 15 but the company doesn’t start production until April 10, depreciation starts in March.
Because assets rarely arrive on the first day of a fiscal year, companies need a convention for handling partial periods. Common approaches include the half-year convention (treat every asset as if it was placed in service at the midpoint of the year, giving half a year of depreciation in the first and last year), the mid-month convention (half a month of depreciation in the month placed in service), and an actual-days approach. The choice of convention is a policy decision that should be applied consistently.
Impairment Is a Separate Event
Depreciation assumes an orderly decline in value over time. Sometimes an asset loses value suddenly through damage, obsolescence, or a sharp downturn in the market it serves. When that happens, GAAP requires an impairment analysis rather than waiting for depreciation to catch up.
The test for long-lived assets has two steps. First, compare the asset’s carrying amount (cost minus accumulated depreciation) to the total undiscounted future cash flows you expect the asset to generate. If those cash flows exceed the carrying amount, the asset passes and no write-down is needed. If the carrying amount exceeds the cash flows, measure the impairment loss as the difference between the carrying amount and the asset’s fair value. That loss hits the income statement immediately and permanently reduces the asset’s carrying amount on the balance sheet.
Impairment losses are not reversible under U.S. GAAP. Once you write an asset down, the new lower carrying amount becomes the basis for all future depreciation. A company might be depreciating an asset on a perfectly reasonable schedule, but a single impairment event resets the math for the remaining life.
GAAP Depreciation Is Not Tax Depreciation
The four methods above apply to financial reporting. For tax returns, the IRS has its own system built around the Modified Accelerated Cost Recovery System (MACRS), along with bonus depreciation and Section 179 expensing.1Internal Revenue Service. Publication 946 – How To Depreciate Property The two rarely line up, and that’s by design: GAAP aims to match expense to economic reality, while tax depreciation is a policy tool Congress uses to encourage investment. When you’re deciding which method to use on the financial statements, the tax rules don’t constrain your choice, and the tax return can look very different from the income statement for the same asset over the same year.