When to Get Homeowners Insurance When Building a House

You buy homeowners insurance when building a house at the end of construction, not the beginning. The policy takes effect once the home is finished and your local building department issues a certificate of occupancy. Before that point, a different policy, builder’s risk insurance, protects the structure, and it needs to be active before any ground is broken. No insurer will backdate coverage, so any damage between the start of work and the day a policy begins is on you.

Builder’s Risk Comes First, Before Work Starts

Builder’s risk insurance is a temporary policy covering a structure under construction against fire, theft, vandalism, wind, hail, and similar perils. It has to be in force before the first shovel hits the ground. Premiums typically run between 1% and 5% of the total construction cost, so a $300,000 build might cost $3,000 to $15,000 to insure over the life of the project. Policies usually last three to twelve months, with extensions available if the build runs long, though some carriers only allow one extension.

Coverage limits are set based on the estimated completed value of the home, including materials and labor. Deductibles generally fall between $1,000 and $5,000; a higher deductible lowers the premium. Some policies also cover soft costs that accumulate when a covered loss delays the project, including construction loan interest, architect fees, real estate taxes, and the cost of renegotiating contracts or leases pushed past their original deadlines.

The exclusions matter as much as the coverage. Builder’s risk policies typically exclude floods, earthquakes, and employee or contractor theft. If your build sits in a flood zone or seismic area, you need separate policies or endorsements. Builder’s risk also does not include liability coverage at all. If someone gets hurt on your construction site, this policy will not pay their medical bills or your legal fees.

What You Still Need Covered During the Build

Builder’s risk is the backbone, but it leaves three gaps a homeowner has to fill separately before and during construction.

Liability for Injuries on Site

If a neighbor’s child wanders into an excavation pit, or a delivery driver trips over rebar, builder’s risk will not respond. A separate general liability policy covers bodily injury, property damage, and personal injury claims arising from the project. For residential construction, general liability premiums average roughly $80 to $100 per month, though costs vary with project size and location.

Construction sites also carry attractive nuisance exposure. Under that doctrine, property owners can be liable when a dangerous condition on their land draws children who are then injured. Heavy equipment, open trenches, stacked materials, and unstable surfaces are exactly the hazards courts look at.1Legal Information Institute (LII) / Cornell Law School. Attractive Nuisance Doctrine Fencing the site, locking equipment cabs, shutting down machinery at the end of each day, and clearing debris are the kinds of steps courts weigh when deciding whether an owner took reasonable care.

If you are acting as your own general contractor, the picture gets more complicated. Many states treat subcontractors you hire directly as your employees for workers’ compensation purposes, even if those workers carry their own insurance. A misclassification finding can bring fines plus reimbursement to the state’s uninsured employers’ fund. Check your state’s workers’ compensation rules for owner-builders before hiring anyone directly, because builder’s risk and homeowners policies will not cover those penalties.

Flood Coverage

If your site is in a FEMA-designated flood zone, your lender will almost certainly require flood insurance, and the National Flood Insurance Program will cover a building under construction even before it has walls and a roof. The rules have teeth. If the structure is not yet walled and roofed when a loss occurs, the deductible doubles compared to a completed building. Coverage lapses entirely if construction stops for more than 90 days, or if the lowest floor sits below the base flood elevation.2FEMA. NFIP Flood Insurance Manual – Before You Start

Materials and supplies are only covered if stored inside an enclosed building on or adjacent to the site. Lumber sitting in an open lot during a flood is not covered. Coordinate the flood policy start date with your builder’s risk policy so no gap opens, and keep the work moving to avoid the 90-day cutoff.

Materials Off-Site and in Transit

Standard builder’s risk policies cover materials at the job site, but coverage for materials stored elsewhere or being delivered depends on the specific policy terms. Custom cabinets sitting in a warehouse across town, or framing lumber on a truck, may not be covered unless you have a broad form endorsement or your policy explicitly includes off-site and in-transit coverage. Material theft before installation is one of the most frequent construction claims. Ask your insurer specifically about off-site storage and transit coverage and get the answer in writing. Keep detailed receipts and photographs of stored materials.

What Your Construction Lender Requires, and When

If you are financing the build, the lender will require proof of insurance before releasing any funds. For a construction-to-permanent loan, which disburses money in stages as the build progresses, coverage must be in place before the first draw. Lenders expect builder’s risk during construction and a standard homeowners policy once the structure is complete.

Fannie Mae’s selling guide requires that there be no coverage exclusions or limitations related to renovation or construction work while work is being performed, and that once construction is complete, the policy reflect the full replacement cost of the finished home.3Fannie Mae. Additional Insurance Requirements Freddie Mac similarly mandates coverage for fire, windstorm, hurricane, hail, and other localized perils. The lender will also require that the mortgage company be listed as the loss payee on your policy. Deductible amounts are subject to lender approval, and most cap them at a percentage of the dwelling coverage.

If you let coverage lapse at any point, the lender can purchase insurance on your behalf and charge you for it. Federal rules require servicers to warn borrowers that force-placed coverage “may cost significantly more than hazard insurance purchased by the borrower” and “may not provide as much coverage.”4Consumer Financial Protection Bureau. Force-Placed Insurance Force-placed policies often cost two to three times what you would pay yourself, and they protect only the lender’s interest. Keep your policy current and send proof to the lender before deadlines.

Switching to a Homeowners Policy at the End

Once construction wraps up, your builder’s risk policy expires or gets canceled, and you need a standard homeowners policy in place before you move in. The trigger for the transition is usually the certificate of occupancy issued by your local building department, which confirms the home meets code and is safe to inhabit. Your insurer will likely require a copy, and your lender definitely will.

Do not let a gap form between the builder’s risk policy ending and the homeowners policy starting. If builder’s risk is about to expire and construction is not finished, extend it before it lapses. A coverage gap during the final weeks of a build is an unnecessary gamble on what is probably the largest asset you own.

Newly built homes often qualify for lower homeowners premiums than older properties. Modern electrical systems, fire-resistant materials, impact-rated roofing, and current building codes all reduce risk. The average annual homeowners premium for a recently built home runs around $1,400 to $1,500, compared to significantly higher rates for older homes, though location and coverage limits create wide variation. Homes in areas prone to wildfires, hurricanes, or flooding may need separate endorsements or standalone policies for those perils, which can push total insurance costs well above the baseline.

Your lender will review the new policy before final closing on the permanent mortgage to confirm that coverage meets its minimum requirements, that the replacement cost reflects the finished home’s value, and that the lender is listed as the loss payee.3Fannie Mae. Additional Insurance Requirements

The Short Version of the Timeline

  • Before the first day of work: builder’s risk policy active, plus general liability, plus flood insurance if the site requires it.
  • During construction: policies stay current, materials off-site covered by endorsement if needed, no 90-day work stoppage if a flood policy is in force.
  • Certificate of occupancy issued: homeowners policy begins the same day builder’s risk ends, with the lender listed as loss payee and replacement cost matching the finished home.

The timing question answers itself once you see it as two policies back to back rather than one decision. Builder’s risk is the policy you buy when building a house. Homeowners is the policy you switch into the moment the house is finished.