When Do You Need a Performance Bond: Federal, Public, Private

You need a performance bond any time a federal construction contract exceeds $100,000, any time a state or local public project crosses that jurisdiction’s bonding threshold, and any time a private owner, construction lender, or prime contractor writes the requirement into your contract. The first two are statutory. The rest are contractual, and in practice they catch most sizable projects whether or not any law demands it. So the real question is less about whether a performance bond is ever legally mandatory and more about which of these triggers applies to the job in front of you.

Federal Construction Contracts Over $100,000

The clearest legal trigger sits in the Miller Act, 40 U.S.C. §§ 3131–3134. Before any federal contract exceeding $100,000 is awarded for construction, alteration, or repair of a public building or public work, the contractor must furnish a performance bond satisfactory to the contracting officer. The contracting officer sets the bond amount based on the project’s scope, and the bond becomes binding the moment the contract is awarded.1Office of the Law Revision Counsel. 40 USC 3131 – Bonds of Contractors of Public Buildings or Works

Two details in the statute catch people off guard. The $100,000 figure is a floor, not a ceiling on the government’s discretion: contracting officers have authority to require performance bonds on contracts below the threshold and on contract types the statute doesn’t explicitly cover. And the bond specifically covers unpaid employment taxes the contractor collects or withholds from wages during the project, so if payroll taxes are pocketed instead of remitted, the surety is on the hook.1Office of the Law Revision Counsel. 40 USC 3131 – Bonds of Contractors of Public Buildings or Works

The Miller Act also requires a payment bond alongside the performance bond. The payment bond must equal the total contract price unless the contracting officer finds that impractical, and it can never fall below the performance bond amount. If you bid federal work, expect to furnish both bonds as a package.1Office of the Law Revision Counsel. 40 USC 3131 – Bonds of Contractors of Public Buildings or Works

State and Local Public Projects

Every state has its own bonding statute for public construction, commonly called a Little Miller Act. These laws mirror the federal framework by requiring performance and payment bonds on state-funded and locally funded projects such as school buildings, bridges, and water systems. The dollar thresholds vary. Some states set the bar as low as $25,000; others track the federal $100,000 mark. The underlying principle is consistent across jurisdictions: taxpayer-funded work must be backed by a surety’s guarantee.

Before you spend time on an estimate for any public project at any level of government, check the solicitation documents for the specific bonding requirement. The threshold and the required bond amount vary not just by state but often by agency.

Private Projects With a Contractual Requirement

No federal or state law forces a private owner to require a performance bond. The requirement comes from the contract itself, and in a private deal two parties typically insist on it: the lender and the owner.

Commercial lenders funding a construction loan almost always make a performance bond a condition of closing. The bank is lending against a building that doesn’t exist yet, so if the contractor defaults halfway through, the lender is stuck with a half-finished structure and a borrower who may not have the resources to hire a replacement. A performance bond shifts that completion risk to a surety company. Without the bond, many lenders refuse to release construction draws.

Private owners managing large developments use bonds the same way. On a project worth tens of millions of dollars, the owner’s alternative is suing a defaulted contractor, a process that can take years and recover pennies on the dollar if the contractor is insolvent. The bond creates a direct path to project completion through a third-party guarantor with real financial resources. This is standard practice in commercial real estate, industrial facilities, and large-scale residential developments. On a private project of any significant size, expect the bond requirement to appear in the bid package.

Subcontractor Bonds Required by the Prime Contractor

General contractors frequently require their major subcontractors to carry performance bonds, even when the project owner doesn’t specifically demand it. This usually happens because the general contractor’s own surety insists on it as a condition for issuing the main project bond. From the surety’s perspective, a prime contractor is only as reliable as the firms doing the actual work. If the electrical subcontractor on a $50 million project walks off the job, the general contractor faces schedule delays, liquidated damages, and the cost of bringing in a replacement at a premium.

When a bonded subcontractor defaults, the general contractor files a claim against the subcontractor’s bond to recover the cost of completing that scope of work. The subcontractor’s surety then steps in, either by arranging completion or paying the claim. Subcontractor bonding is most common on large industrial, institutional, and infrastructure projects where the specialized trades represent substantial dollar values.

Some large general contractors use Subcontractor Default Insurance (SDI) instead of requiring individual subcontractor bonds. If you’re working under a general contractor that uses SDI, you may not be asked to post a bond on that project. SDI is a two-party insurance policy where the general contractor manages the default and submits documentation to the insurer for reimbursement, subject to a deductible and co-payment. It also provides no payment protection for the subcontractor’s own suppliers and workers, which a payment bond would.

Service, Supply, and Non-Construction Contracts

Performance bonds aren’t limited to building projects. Federal agencies can require them on service contracts, IT implementations, and supply agreements when the government needs assurance that the vendor will deliver. The General Services Administration maintains a separate performance bond form specifically for non-construction contracts.2GSA. Performance Bond for Other Than Construction Contracts The Miller Act’s bonding mandate technically applies only to construction, alteration, and repair, but contracting officers have broad authority under 40 U.S.C. § 3131(e) to require bonds in other situations when they determine it’s necessary.1Office of the Law Revision Counsel. 40 USC 3131 – Bonds of Contractors of Public Buildings or Works

Private companies also use performance bonds in manufacturing, technology, and energy contracts where a vendor’s failure to deliver would cause serious financial harm. If a buyer is relying on your delivery to hit a production schedule or meet a regulatory deadline, a bond requirement in the purchase agreement is a reasonable thing to expect.

How Long the Bond Obligation Lasts

A performance bond doesn’t always expire the day the owner accepts the finished project. Most construction contracts include a maintenance or warranty period, commonly one to two years, during which the contractor is responsible for repairing defective work. A standard performance bond covers the contractor’s obligations under the entire contract, which includes that warranty period.

If the contract specifies a maintenance period beyond two years, the surety will typically charge additional premium for the extended exposure. Some owners require a separate maintenance bond rather than relying on the performance bond to stretch into the warranty phase. When pricing a project, factor in the full duration of your obligations, not just the construction timeline.

If You Can’t Qualify for a Bond on Your Own

Small and emerging contractors who can’t qualify for bonds through conventional underwriting have a federal backstop. The SBA’s Surety Bond Guarantee Program encourages surety companies to issue bonds to small businesses by guaranteeing a portion of the surety’s loss if a claim is paid. The program covers contracts up to $9 million for non-federal projects and up to $14 million for federal projects.3U.S. Small Business Administration. Surety Bonds

To qualify, your business must meet the SBA’s size standards and pass the surety’s evaluation of credit, capacity, and character. The SBA’s guarantee reduces the surety’s risk enough to say yes where it otherwise wouldn’t. The cost to the contractor is a fee of 0.6% of the contract price for performance and payment bond guarantees. The SBA does not charge a fee for bid bond guarantees.3U.S. Small Business Administration. Surety Bonds If you’ve been turned down for bonding through conventional channels, this program is worth exploring before you give up on bidding public work.

Performance Bond vs. Payment Bond

The two bonds are almost always required together, but they protect different people. A performance bond protects the project owner by guaranteeing the work will be completed. A payment bond protects subcontractors and material suppliers by guaranteeing they’ll be paid for their labor and materials. On federal projects, the Miller Act explicitly requires both.1Office of the Law Revision Counsel. 40 USC 3131 – Bonds of Contractors of Public Buildings or Works Most state bonding statutes follow the same pattern.

The distinction matters when something goes wrong. If the contractor abandons the project, the owner files against the performance bond. If the contractor finishes the project but doesn’t pay a subcontractor, the subcontractor files against the payment bond. The claims processes are separate, the claimants are different, and the surety evaluates each independently. A performance bond alone, without a payment bond, leaves subcontractors exposed, and on public projects that gap violates the law.