What to Expect from a Home Insurance Inspection

A home insurance inspection is a visual review of your property by someone the insurer sends out, used to decide whether to approve your policy, price it higher, require repairs first, or decline it. The focus is narrow and predictable: roof, electrical, plumbing, HVAC, and safety features. These reviews are most common on older homes, higher-value homes, and new policies or carrier switches.

The Three Types You Might Face

Not every inspection involves someone walking through your house. Which version you get depends on the home’s age, the policy, and the insurer’s appetite for risk.

A full inspection is the thorough one. The inspector evaluates the structure, every major system, built-in appliances, safety features, windows, doors, fireplaces, and site conditions, inside and out. You or someone you authorize needs to be home so the inspector can reach every room.

A 4-point inspection is narrower and faster, covering only the roof, electrical, plumbing, and HVAC. Insurers commonly require it on homes 25 to 30 years old or more. It’s visual only, usually runs $75 to $175, and takes under an hour. Because only four things are on the list, each one carries real weight.

A drive-by or exterior-only inspection is the simplest. Someone looks at the outside without entering, or the insurer pulls aerial imagery. Carriers use these for renewals and lower-risk homes, and some now rely on drone photography to check the roof instead of sending a person up a ladder.

How to Prepare Before the Inspector Arrives

A week or two of attention beforehand can keep small issues from becoming required repairs. Walk the property as if you were the inspector.

  • Clear debris from gutters and point downspouts away from the foundation. From the ground, scan the roof for missing or curling shingles.
  • Trim tree branches that overhang the roof or touch the house. Repair cracked walkways, loose steps, and wobbly handrails.
  • Check the basement and attic for water staining, mold, mildew, or signs of pests. These are classic flags.
  • Test every smoke and carbon monoxide detector. Replace dead batteries and any expired units.
  • Fix visible plumbing leaks. If the water heater is rusting or weeping, dealing with it now avoids a mandated replacement on the insurer’s timeline.
  • Make sure the electrical panel is accessible and not buried behind storage. Press the test button on every GFCI outlet in kitchens, bathrooms, and outdoor areas.
  • Replace the HVAC filter and confirm the system heats and cools. If it hasn’t been serviced recently, a tune-up can head off problems.

None of this guarantees a clean report, but a well-kept home influences how borderline items get characterized.

What Inspectors Look At Outside

The Roof

The roof gets more scrutiny than anything else because it drives an outsized share of claims. Inspectors note missing, cracked, or curling shingles, water intrusion, and the age of the material. Many insurers won’t offer full coverage on an asphalt shingle roof older than 15 to 20 years, and some will decline to write the policy until it’s replaced. Metal and tile roofs get more leeway because they last longer, but they’re still checked for damage.

Foundation, Siding, and Drainage

Horizontal and stair-step cracks in the foundation suggest structural movement, which worries insurers more than hairline settling cracks. Siding is checked for rot, warping, or missing sections that expose the structure to moisture. Water should flow away from the house, not pool against it; clogged or disconnected gutters are a red flag.

Pools, Trampolines, and Detached Structures

Pools draw extra attention. Most insurers require at minimum a safety fence with a self-closing, self-latching gate, and some also want covers or alarms. Trampolines and similar equipment can lead to liability exclusions, higher premiums, or an outright refusal to write the policy. Sheds, garages, and fences are inspected for condition and factored into the coverage calculation.

What Inspectors Look At Inside

Plumbing

Inspectors look for active leaks, water pressure problems, and the type and age of your pipes. Galvanized steel pipes in older homes corrode from the inside and eventually leak. Polybutylene pipes, common in homes built between the late 1970s and mid-1990s, are a bigger concern: they’re prone to sudden failure, and some insurers exclude polybutylene-related water damage from coverage or require a full repipe before issuing a policy.

Water heaters are checked for age and corrosion. Most insurers expect replacement around 10 to 15 years. A rusty tank or mineral buildup on the connections will get noted even on a younger unit. Whole-home automatic shutoff valves on the main water line are increasingly on insurers’ radar, and some carriers offer premium discounts for homes that have them.

Electrical

Electrical problems cause fires, and insurers treat them that way. Knob-and-tube wiring (homes built before the 1950s) and aluminum wiring (homes from the 1960s and 1970s) are both flagged as elevated risks. Knob-and-tube becomes more susceptible to fraying with age and poses a greater fire risk when wall insulation surrounds it under heavy load. Aluminum wiring is less durable than copper and deteriorates faster, making connections prone to overheating. Insurers that will cover these homes often charge higher premiums and may require an inspection report confirming the wiring’s current condition.1Progressive. Does Homeowners Insurance Cover Faulty Wiring

The panel matters too. Federal Pacific Electric Stab-Lok breakers and Zinsco panels are widely regarded as fire hazards within the industry. The Consumer Product Safety Commission investigated FPE breakers and confirmed they fail certain UL calibration test requirements, though it closed its investigation citing insufficient data to definitively link the failures to hazardous conditions.2U.S. Consumer Product Safety Commission. Commission Closes Investigation of FPE Circuit Breakers and Provides Safety Information for Consumers Despite that ambiguous conclusion, most insurers treat these panels as unacceptable risks and require an upgrade before writing or renewing the policy.

HVAC

The inspector confirms the furnace, air conditioner, or heat pump operates and looks for leaks, corrosion, or improper venting. A visibly aging and neglected system can trigger a required replacement. On a 4-point inspection, HVAC is one of only four items evaluated, so its condition carries more weight than it would on a full report.

Safety Features That Are Easy Wins

Safety items are where preparation pays off, because fixes are usually cheap and fast.

Smoke alarms should be installed inside each bedroom, outside each sleeping area, and on every level of the home including the basement.3National Fire Protection Association. Installing and Maintaining Smoke Alarms Carbon monoxide detectors are required outside every sleeping room within 15 feet and on every occupiable level, and sleeping rooms that contain a fuel-burning appliance need one inside the room too. Some insurers prefer hardwired or interconnected units, but most accept battery-operated models as long as they work and haven’t expired.

Older homes draw code-compliance scrutiny. Stairways with four or more risers need handrails, firmly anchored with no movement at the attachment points.4U.S. Department of Housing and Urban Development. National Standards for the Physical Inspection of Real Estate – Handrail Outlets near water sources in kitchens, bathrooms, garages, and outdoor areas should have GFCI protection, and homes missing it may need updates before approval.5U.S. Consumer Product Safety Commission. CPSC Fact Sheet – What Is a GFCI Fire extinguishers and clear exits won’t make or break a policy on their own, but they help on borderline calls.

What the Report Triggers

The inspector sends a report to the underwriting team describing each system’s condition and flagging anything that could affect insurability. The underwriter then approves at standard rates, approves with a higher premium, excludes certain risks, approves on condition, or declines.

Conditional approval is the most common outcome when problems turn up. The insurer writes the policy but requires specific repairs within a set window, often around 30 days. Typical mandates include replacing an aging roof, upgrading outdated wiring or a flagged panel, fixing active water damage, or repiping problematic plumbing. If the work doesn’t get done in time, the insurer can cancel the policy or decline to renew.

Some insurers send someone back to verify the repairs. Others accept photos. Keep receipts and contractor documentation either way; the paperwork protects you if there’s a dispute about whether you met the conditions.

Disputing an Inspection Result

If the report looks wrong, request a copy and read it for factual errors. Inspectors occasionally misidentify materials (calling copper wiring aluminum, for example) or note damage that’s already been repaired.

You can hire an independent inspector or licensed contractor for a second assessment, which gives you documentation to push back with. If the dispute is about the valuation of damage or repair costs, check your policy for an appraisal clause. Many homeowners policies include one, and either party can invoke it in writing. Each side picks an appraiser, and if those two can’t agree, a neutral umpire’s decision combined with either appraiser becomes binding.

If the insurer still won’t move, you can file a complaint with your state’s department of insurance. These agencies regulate carrier conduct and can intervene when a company acts unreasonably. It’s a last resort, but insurers take regulatory complaints seriously.