Every state in the continental United States has at least one local government charging a stormwater fee, the charge popularly known as a rain tax. But there is no state-by-state rain tax map in the usual sense, because these fees are almost always set by cities and counties rather than by state governments. Whether you pay one depends on your specific municipality, not on which state you live in. A 2025 national survey counted more than 2,100 stormwater utilities across the country.
Why It’s Called a Rain Tax
The label traces to Maryland. In 2013, the state passed a law requiring its ten largest jurisdictions to impose stormwater management fees, with revenue directed toward reducing pollution flowing into the Chesapeake Bay. The political reaction was immediate. Frederick County adopted a fee of one cent per year in protest. Carroll County refused to comply at all. By 2015, the legislature repealed the mandate but left individual jurisdictions free to keep their fees. Baltimore and several others did.
Critics elsewhere in the country picked up the “rain tax” phrase and applied it to any stormwater charge. The underlying concept is older than the label. Stormwater utilities have existed since the 1970s, and the count has climbed steadily as federal water-quality rules have tightened.
Which States Have Stormwater Fees
All 48 continental states contain at least one stormwater utility, so the more useful question is where these fees are concentrated. The number per state ranges from a handful to well over a hundred. Minnesota alone has more than 200. Maryland, Virginia, Florida, Georgia, Pennsylvania, Tennessee, and the Pacific Northwest states all have particularly high numbers of active stormwater utilities. Concentration tends to track urban population, water-quality concerns, and aggressive enforcement of federal stormwater permits.
Western Kentucky University runs the most comprehensive tracking effort available, and its ongoing national survey put the total past 2,100 utilities. The EPA’s last published count sat above 800, so the growth over roughly the last decade has been substantial. There is no single national database of rates, which is why finding your specific fee means checking locally.
Why These Fees Exist
The Clean Water Act prohibits discharging pollutants into U.S. waterways without a permit. Rain running off streets, roofs, and parking lots collects oil, fertilizer, trash, and other contaminants before draining into rivers, lakes, and coastal waters. Under the EPA’s National Pollutant Discharge Elimination System, cities and counties operating municipal storm sewer systems need permits for those discharges, and those permits carry ongoing obligations: public education, illicit discharge detection, construction site controls, and pollution prevention.
Running these programs costs money. A stormwater utility fee creates a dedicated revenue stream that legally can be spent only on stormwater-related activities. That restriction is what distinguishes a stormwater fee from a general tax.
How the Fee Is Calculated and What You Pay
Most stormwater fees are based on impervious surface: the total area of rooftops, driveways, patios, and anything else that keeps rain from soaking into the ground. More impervious surface means more runoff and a higher fee. About 80 percent of stormwater utilities nationwide bill using an Equivalent Residential Unit, or ERU, which represents the average impervious area on a typical single-family home in that community. That number commonly falls between 2,000 and 3,500 square feet. A single-family home pays one ERU; a big-box store with acres of parking might owe dozens.
Other municipalities use flat residential fees, tiered brackets based on ranges of impervious area, or individually measured charges. Billing may show up on a monthly water or sewer bill, or as an annual line on a property tax statement.
Residential fees for a typical single-family home generally fall between $3 and $15 per month, though some communities charge less and others charge considerably more. Older cities with combined sewer systems and aging infrastructure tend toward the higher end. Newer suburbs with modern drainage often sit lower. A single national average isn’t meaningful because the variation is so wide.
How to Find Out If You’re Paying One
Check your most recent water or sewer bill for a line labeled “stormwater,” “storm drainage,” or similar. If your community bills stormwater through property taxes, it will appear as a separate line on your tax statement. Your city or county public works department website is the best source for the full rate structure, credit programs, exemptions, and appeal procedures. If you’re buying property, ask about stormwater fees during due diligence. For a house the number is modest, but for a commercial property with large impervious surfaces the annual charge can be substantial.
Reducing, Appealing, or Being Exempt From the Fee
Many stormwater utilities offer credits that lower your bill if you manage runoff on your own property. Rain gardens, permeable pavement, green roofs, rain barrels, and detention or retention basins are common qualifying measures. Credit amounts vary widely. Some communities offer 10 to 40 percent off. Others go higher, and a handful allow up to 100 percent credit for properties that retain all stormwater on-site. Residential credits are typically simpler to claim than commercial ones, which often require engineered solutions and formal documentation. You generally need to apply, describe what you’ve installed, and sometimes allow an inspection.
Certain property types are commonly exempt. Actively farmed agricultural and horticultural land often qualifies for a full or partial exemption, on the theory that farmland absorbs rain rather than shedding it. Undeveloped land with no impervious surfaces may be exempt or minimally charged. Some jurisdictions also reduce or exempt fees for churches, nonprofits, or government property, though this varies and has been politically contested.
If you think your fee is based on an inaccurate measurement, you can appeal. Most utilities have a formal process: submit an application with documentation showing the measured impervious area is wrong. Many municipalities publish online maps where you can view the measurement assigned to your parcel. If a shed was demolished, a driveway was replaced with permeable pavers, or the aerial imagery is outdated, you have grounds to request a correction. Appeals are usually handled administratively, no lawyer required.
What Happens If You Don’t Pay
Stormwater fees carry real collection consequences. Because they function as utility charges or ride along with property tax bills, unpaid fees can result in a lien on your property. That lien must be satisfied before you can sell or refinance. Late fees and interest also accrue, with the specifics varying by jurisdiction; some charge flat late fees while others apply percentage-based interest.
Unlike a water or electric bill, there is no service to shut off if you fall behind. Rain falls whether you’re current or not. The enforcement tools are financial: liens, interest, and in some cases referral to collections. The bill grows the longer it sits.
Is a Stormwater Fee Tax-Deductible
For most homeowners, no. The IRS treats service charges for water, sewer, and trash collection as nondeductible, and stormwater fees fall into the same utility-type category rather than the deductible state and local tax category.1Internal Revenue Service. Topic No. 503, Deductible Taxes
Commercial property is different. Stormwater fees paid on property used for business are generally deductible as an ordinary business expense, the same way water and sewer costs are. If you use part of your home for a qualifying home office, a proportional share of the fee could potentially be deductible as part of home office expenses. Talk to a tax professional about your specific situation.