The Supervisory Review and Evaluation Process, known as SREP, is the yearly check European banking supervisors run on each large bank to decide how much capital and liquidity that specific institution must hold to cover its own risks. The European Central Bank applies it to the biggest banks in the euro area through the Single Supervisory Mechanism. The most recent cycle covered 105 institutions and produced an average Pillar 2 capital add-on of 1.2% of risk-weighted assets for 2026.1European Central Bank. ECB Keeps Capital Requirements Broadly Stable for 2026 Amid Heightened Uncertainty The outcome of a SREP cycle is binding: it sets the capital floor a bank must stay above, shapes whether it can pay dividends or bonuses, and in serious cases drives formal enforcement.
SREP exists because the flat capital minimums that apply to every bank are not enough on their own. A lender concentrated in one volatile sector carries different risks than a diversified retail bank, and SREP is how supervisors tailor expectations to those differences. The baseline requirements it sits on top of are a Common Equity Tier 1 ratio of 4.5%, a Tier 1 capital ratio of 6%, and a total capital ratio of 8%.2Bank for International Settlements. Definition of Capital in Basel III Executive Summary Everything SREP adds is bank-specific.
What SREP Evaluates
Each assessment breaks a bank’s health into four areas. The scores across them combine into a single overall SREP score that drives the capital and liquidity requirements imposed on the bank.
Business Model Viability
Supervisors ask whether the bank can realistically make money over the medium term. That means testing the strategic plan, the competitive position, and whether revenue projections hold up under honest assumptions. A bank that cannot show a credible path to sustained profitability will come under pressure to restructure or refocus. The question is not just whether current profits look fine but whether the sources of those profits are durable.
Internal Governance and Risk Management
The second element looks at how the bank is run: the risk culture, the effectiveness of the board, the quality of internal controls, and whether responsibility for key decisions is clearly assigned. A bank can have strong capital ratios and still be fragile if poor decisions go unchallenged. This is the area where supervisors most often impose qualitative measures, such as changes to management or stronger internal audit.
Risks to Capital
The third element covers the main risks that could eat into a bank’s capital base. Credit risk, the chance that borrowers default, usually dominates. Market risk captures potential losses from moves in interest rates, equity prices, or exchange rates. Operational risk covers losses from internal failures, fraud, or external disruptions like cyberattacks. Supervisors assess both the raw level of each risk and how well the bank’s controls contain it.
Liquidity and Funding Risk
The last element examines whether the bank can survive a sudden loss of funding. Supervisors check that it holds enough high-quality liquid assets to cover outflows over at least a 30-day stress horizon, consistent with the Basel III Liquidity Coverage Ratio. They also look at how stable its funding sources are. Heavy reliance on short-term wholesale funding, which can evaporate in a crisis, typically leads to higher requirements or supervisory criticism.
How Scores Translate Into Requirements
Each of the four elements is scored from 1 to 4. A 1 means low risk with no discernible threat to the bank’s soundness. A 2 is medium-low. A 3 is medium-high, meaning the bank’s condition could deteriorate without corrective action. A 4 means high risk and typically triggers aggressive intervention.3European Central Bank. Supervisory Methodology 2024
Scores of 2 and 3 carry qualifiers (2+, 2, 2−, and 3+, 3, 3−) so supervisors can track movement within a band. The qualifiers are not trend indicators; they simply place the bank more precisely inside its score.3European Central Bank. Supervisory Methodology 2024 The overall SREP score is not a mechanical average. Supervisors weigh the components qualitatively, factoring in how they interact and which weaknesses matter most for the specific institution. In the most recent cycle, the average overall score improved slightly to 2.5, from 2.6 the year before.1European Central Bank. ECB Keeps Capital Requirements Broadly Stable for 2026 Amid Heightened Uncertainty
What a Bank Must Submit
SREP does not begin as a conversation. It begins with two detailed reports that form the evidentiary base for the whole assessment.
Internal Capital Adequacy Assessment Process (ICAAP)
The ICAAP report is where the bank explains, in its own terms, how much capital it believes it needs. It has to cover the bank’s internal risk measurements, the stress tests it has run, and the strategies it uses to stay solvent under adverse conditions. CRD IV requires every credit institution to maintain robust processes for evaluating its own capital needs, and the ICAAP is the main output.4European Central Bank. ECB Guide to the Internal Capital Adequacy Assessment Process Supervisors do not take the self-assessment at face value. They challenge the assumptions, test the models, and compare the figures with their own supervisory benchmarks. A weak or unrealistic ICAAP is itself a red flag.
Internal Liquidity Adequacy Assessment Process (ILAAP)
The ILAAP does for liquidity what the ICAAP does for capital. It details how the bank measures liquidity risk, the size and quality of its liquid asset buffers, its funding plan, and its contingency strategy for a sudden loss of market access. Supervisors use it to verify that the bank’s assumptions about how long it could survive a funding squeeze are realistic. If the projections look optimistic relative to the actual funding structure, tighter liquidity requirements follow.
The European Banking Authority publishes guidelines that standardize how these reports are prepared and submitted so supervisors can compare institutions side by side.5European Banking Authority. Supervisory Review and Evaluation Process Guidelines Figures are expected to reflect the most recent quarterly results, and regulators validate the data before relying on it. For most banks’ risk and compliance teams, preparing these submissions is the most resource-intensive stretch of the year.
How the Annual Review Actually Runs
Once the documents are in, the review shifts from paperwork to active engagement. For significant institutions in the euro area, the work is led by Joint Supervisory Teams. Each team combines ECB staff with personnel from the relevant national supervisory authority, led by an ECB-appointed coordinator with a national sub-coordinator from each country involved.
These teams monitor the bank continuously, not just at year-end. They track activities throughout the year, raise questions about emerging risks, and maintain a regular dialogue with senior management. The constant contact means supervisors are rarely surprised by annual results, and when something unexpected does surface, the team already has the context to react.
On-site inspections provide deeper scrutiny. These can last several weeks and typically focus on a specific area such as a particular loan portfolio, trading desk, or control process. The point is to verify that the policies described in the ICAAP and ILAAP are actually followed in daily operations. Gaps between stated policy and observed practice are among the most common findings.
For banks operating across multiple countries, supervisory colleges bring together regulators from all relevant jurisdictions to compare notes and keep expectations aligned. The insights from monitoring, inspections, and college discussions are compiled into a draft assessment that becomes the basis for the formal SREP decision.
The Binding Outcome: Capital Requirements, Guidance, and Qualitative Measures
The SREP decision tells the bank exactly how much additional capital it must hold on top of the Pillar 1 minimum and any applicable buffers, and what else it needs to fix.
Pillar 2 Requirement (P2R)
The Pillar 2 Requirement is a mandatory, bank-specific capital add-on. Falling below it carries the same legal consequences as breaching the Pillar 1 minimum, including potential restrictions on distributions and formal enforcement. For 2026, the average P2R across all significant institutions supervised by the ECB sits at 1.2% of risk-weighted assets in CET1 terms, broadly stable with prior years. Some banks receive higher add-ons for specific problems. In the most recent cycle, ten banks received an additional add-on for insufficiently provisioned non-performing exposures, and six received one tied to leveraged finance activities.1European Central Bank. ECB Keeps Capital Requirements Broadly Stable for 2026 Amid Heightened Uncertainty
Pillar 2 Guidance (P2G)
The Pillar 2 Guidance is a bank-specific recommendation for capital held above the binding requirements. It is not legally binding.6European Central Bank. Pillar 2 Guidance That distinction matters less in practice than it sounds. A bank that dips into its P2G buffer will not face automatic legal penalties, but it will draw immediate supervisory attention, more frequent inspections, and pressure to rebuild. For 2026, the average P2G fell to 1.1% of CET1 from 1.3% the prior year, informed by the 2025 EU-wide stress test.1European Central Bank. ECB Keeps Capital Requirements Broadly Stable for 2026 Amid Heightened Uncertainty
Qualitative Measures
SREP decisions can also include qualitative requirements targeting governance or operational weaknesses: restricting dividends, requiring more experienced management, or mandating improvements to internal controls. The ECB issued roughly 30% fewer new qualitative measures in the most recent cycle than the year before, as some banks had already addressed earlier findings. Taken together, the overall CET1 capital requirements and guidance applicable in 2026 stayed broadly stable at 11.2%, which is the ratio the average euro area bank must maintain when the Pillar 1 minimum, the P2R, and all applicable buffers and guidance are stacked.1European Central Bank. ECB Keeps Capital Requirements Broadly Stable for 2026 Amid Heightened Uncertainty
What Happens If a Bank Falls Short
Consequences escalate with the layer of the capital stack that gets breached. Dipping below the combined buffer requirement (the capital conservation buffer plus any applicable countercyclical or systemic risk buffers) triggers automatic restrictions on dividends, share buybacks, and discretionary bonus payments. These restrictions are graduated: the deeper the shortfall, the less the bank can distribute. A bank that falls further and breaches its Pillar 2 Requirement faces formal enforcement action and may be required to submit a capital conservation plan showing how it will rebuild its ratios.
Reporting failures carry their own penalties. The ECB sanctioned J.P. Morgan in early 2026 with penalties totaling €12.18 million for misreporting capital requirements related to credit risk and credit valuation adjustment risk. Inaccurate or late ICAAP and ILAAP submissions can draw increased oversight, more frequent inspections, or higher capital requirements as a precautionary measure.
How the US Handles the Same Job
SREP is a European framework. US banks are not subject to it. Instead, the United States runs a functionally similar regime built around CAMELS ratings, annual stress tests, and capital planning reviews. The mechanics are different, but the objective is the same: making sure large banks can absorb losses without destabilizing the system.
US examiners assign every insured institution a composite CAMELS rating based on six components: capital adequacy, asset quality, management capability, earnings quality, liquidity adequacy, and sensitivity to market risk. Each component and the overall composite are scored from 1 (strongest) to 5 (weakest).7Federal Reserve. Commercial Bank Examination Manual A 3 or worse typically triggers more frequent examinations and may bring restrictions on acquisitions, new branches, or dividends. Banks rated 4 or 5 are classified as problem institutions and almost always face formal enforcement action.8Federal Deposit Insurance Corporation. Formal and Informal Enforcement Actions Manual
Alongside CAMELS, the Dodd-Frank Act requires the Federal Reserve to run annual stress tests on bank holding companies with $100 billion or more in total consolidated assets. The tests model how each bank’s capital would hold up under a severely adverse scenario of deep recession, sharp market declines, and elevated unemployment. Banks with large trading operations face an additional global market shock component and may have to model the unexpected default of their largest counterparty.9Federal Reserve. 2026 Final Supervisory Stress Test Scenarios In the 2025 round, 22 banks participated; under the severely adverse scenario, aggregate projected losses reached $549 billion and the aggregate CET1 ratio fell from 13.4% to a stressed minimum of 11.6%, still well above the 4.5% regulatory floor.10Federal Reserve. 2025 Federal Reserve Stress Test Results Results feed directly into each bank’s stress capital buffer, which replaces the static 2.5% capital conservation buffer for large firms. The stress capital buffer has a 2.5% floor but can be substantially higher based on the stress scenario losses.11Federal Register. Modifications to the Capital Plan Rule and Stress Capital Buffer Requirement A bank that fails to stay above its stress capital buffer faces the same kind of graduated restrictions on dividends, buybacks, and bonuses that a European bank faces for breaching its combined buffer requirement.