Invoice financing lets a business borrow against unpaid customer invoices to get cash now instead of waiting 30 to 90 days for customers to pay. A financing company advances roughly 70% to 90% of each invoice’s face value within a day or two, then charges a fee—often 1% to 5% per month—that keeps running until the customer settles the bill. When payment arrives, the financing company takes back its advance and its fees and releases what’s left to you.
The appeal is speed and accessibility. Approval turns on your customers’ ability to pay, not your own credit score, and funds move far faster than a bank loan. The trade-off is cost: annualized, the fees usually land somewhere between 15% and 50% APR, well above a line of credit or an SBA loan.
How the Cycle Works
The process has four stages, and once you understand them the rest of the vocabulary falls into place.
First, you apply. The core document is an accounts receivable aging report listing every unpaid invoice and how long each has been outstanding. You also provide your EIN, your formation documents, and the specific invoices you want to finance with customer contact details and payment terms. The lender searches public records for existing liens and verifies each invoice directly with the customer’s accounts payable department, confirming the amount, the terms, and that no dispute exists.
Second, you get the advance. After verification, the financing company deposits 70% to 90% of the invoice face value, often within 24 to 48 hours. The exact advance rate depends on your industry, your invoice volume, and how reliably your customers pay. The remaining 10% to 30% sits in a reserve account.
Third, the customer pays. Where the payment goes depends on the structure you chose (covered in the next section). Fees accrue the whole time the invoice is outstanding, so a 3% monthly rate becomes 6% if the customer takes 60 days.
Fourth, the reserve settles. The financing company deducts its advance and all accumulated fees from the full payment and releases the balance of the reserve to you. Then you submit the next batch of invoices and the cycle starts again. For a business with steady receivables, this creates a rolling source of working capital.
Factoring vs. Invoice Discounting
Invoice financing comes in two main forms, and the difference between them is who talks to your customer about payment.
Factoring
In factoring, you sell your invoices outright to a company called a factor. The factor pays the advance, takes over collections, and your customer sends payment directly to the factor’s bank account. Your customer knows a financing company is involved because they receive a notification of assignment telling them to redirect payment. Once that notification is delivered, the customer can only satisfy the debt by paying the factor.1Legal Information Institute. Uniform Commercial Code 9-406 – Discharge of Account Debtor; Notification of Assignment
Invoice Discounting
Invoice discounting works more like a revolving line of credit secured by your receivables. You keep the sales ledger, you keep collecting from customers, and the lender simply advances cash against the invoices while holding a lien on them. No notification goes out, so your customers typically have no idea the arrangement exists. The SBA describes this version as one where “you remain in control of the sales ledger, collections, and invoice processing” while getting advances on unpaid invoices.2U.S. Small Business Administration. 3 Ways to Get Working Capital for Your Business
Choose factoring if you want someone else to handle collections and don’t mind customers knowing. Choose discounting if preserving the customer relationship and keeping the arrangement private matters more.
Who Loses Money If a Customer Never Pays
Separate from the factoring/discounting choice, every agreement is either recourse or non-recourse. This determines who absorbs the loss when a customer defaults, and it’s the most important risk question to settle before you sign.
Under a recourse arrangement, you are on the hook. If your customer doesn’t pay, you have to buy the invoice back or swap in a different one of equivalent value. Most agreements are recourse because the fees are lower.
Under non-recourse, the factor eats the loss. But read the fine print: non-recourse protection is often narrower than it sounds. Many contracts only cover specific events like a customer declaring bankruptcy, not a customer who simply refuses to pay over a billing dispute. Before signing, ask the factor to list exactly which nonpayment events trigger a buyback and which ones they absorb.
Businesses frequently take the recourse discount without appreciating the downside. If a major customer becomes insolvent, you owe the factor a large sum at the worst possible moment.
Which Invoices Qualify
Not every invoice can be financed. Lenders apply fairly consistent standards:
- The work must already be completed or the goods already delivered. You cannot finance future work.
- The customer must be another business or a government agency. Consumer invoices are generally excluded.
- The invoice usually must be less than 90 days old. Aged receivables signal collection risk.
- There can be no active dispute over the quality of the goods or services tied to the invoice.
- The debt has to be verifiable through shipping documents, signed delivery receipts, or a purchase order.
Lenders also look at customer concentration. If one customer accounts for a large share of your receivables, the lender’s risk spikes if that customer runs into trouble. Many factors cap how much of your financed portfolio can come from any single customer, and invoices above that cap may not get funded.
What It Actually Costs
The headline fee of 1% to 5% is a monthly rate, not a one-time charge. A 2% monthly fee on an invoice that pays in 30 days is roughly 24% APR. If the customer stretches to 60 days, the same invoice costs you 4%. If to 90 days, 6%. Slow-paying customers compound the cost quickly.
Several additional charges can push the total higher:
- Origination or setup fees, charged once when you open the relationship.
- Wire transfer fees, charged each time funds move.
- Monthly minimum fees, triggered when you don’t submit enough invoices to hit a required volume. Minimums of $10,000 to $50,000 per month are common.
- UCC filing fees, which vary by state and typically run from about $10 to $100 or more.
Because fees come out of the reserve rather than your bank account, the true cost is easy to miss. Before signing, ask the factor to show you, in dollars, what a sample invoice would cost under 30-, 60-, and 90-day payment timelines.
The UCC Lien and Your Future Borrowing
When you enter an invoice financing arrangement, the lender almost always files a UCC-1 financing statement with your state’s Secretary of State. This creates a public record that your receivables are pledged as collateral. The filing establishes priority: the first creditor to file generally gets paid first if things go wrong.3Legal Information Institute. Uniform Commercial Code 9-109 – Scope
The practical consequence lands later. When you apply for a bank loan, line of credit, or SBA loan, the new lender will search public records and see the existing UCC-1 on your receivables. That can reduce how much they’re willing to lend or change the terms they offer, because the asset they’d normally look to as collateral is already spoken for.
One useful piece of UCC protection cuts the other way. Some customer contracts contain anti-assignment clauses saying you can’t transfer the invoice to a third party. For accounts receivable, the UCC generally makes those restrictions unenforceable, so you can still factor the invoice.1Legal Information Institute. Uniform Commercial Code 9-406 – Discharge of Account Debtor; Notification of Assignment
Contract Terms That Can Hurt You
The base rate is only part of the deal. Several provisions deserve attention before you sign:
- Personal guarantees. Some factors require the owner to personally guarantee the agreement. Under a recourse contract with a personal guarantee, the factor can pursue your personal assets if customers don’t pay.
- Contract length and lock-in. Terms range from month-to-month to one- or two-year commitments. Longer contracts sometimes carry lower rates but limit your ability to leave.
- Early termination fees. Ending the relationship before the term is up often triggers a penalty. Ask the number upfront.
- Monthly minimums. If your invoice volume dips, say during a seasonal slowdown, you may owe a shortfall fee.
Read the whole agreement. A low advertised rate paired with aggressive minimums, a long lock-in, and a personal guarantee is a different product than it looks like.
How It Shows Up on Your Books
The IRS treats factoring as a sale or assignment of accounts receivable.4Internal Revenue Service. Factoring of Receivables Audit Technique Guide In a non-recourse arrangement, because you’ve transferred both the asset and the risk, the sold invoices can generally come off your balance sheet. The discount (the difference between invoice face value and what you received) is reported as a financing expense.
Recourse factoring and invoice discounting are treated differently. Because you still bear the risk of nonpayment, accounting standards generally treat these as secured borrowing rather than a true sale. The invoices stay on your balance sheet, the advance appears as a liability, and the fees are recorded as interest expense. Talk to a tax professional about how the structure interacts with your specific business, particularly if you’re factoring invoices to a related entity, which the IRS has flagged as an audit focus.4Internal Revenue Service. Factoring of Receivables Audit Technique Guide
Invoice financing solves a specific problem: a gap between work you’ve already done and cash you need now. It solves that problem well, and it costs real money. The businesses that use it successfully go in knowing the monthly rate, the recourse terms, the monthly minimums, and what the UCC filing will do to their next loan application.