Contingent rent is the portion of a commercial lease payment that varies based on a future event rather than being fixed at signing. The variable amount typically depends on the tenant’s sales, changes in a published index like the Consumer Price Index, or how heavily the tenant uses the leased asset. It sits on top of base rent, which the tenant owes regardless of performance. The structure lets tenants keep fixed costs lower during slow periods while giving landlords a share of the upside when business is strong, and the accounting rules treat different triggers in fundamentally different ways.
The Three Common Structures
Contingent rent takes three main forms in commercial leases, and the trigger and formula are always spelled out in the lease itself.
- Percentage rent: The tenant pays a percentage of gross sales (or of sales above a set threshold) on top of base rent. This is the most common form, especially in retail.
- Index-based rent: The base rent adjusts periodically according to a published economic index, most often the Consumer Price Index for All Urban Consumers (CPI-U) published by the Bureau of Labor Statistics.
- Usage-based rent: The variable component ties to how much the tenant physically uses the asset, measured by machine hours, units produced, vehicle throughput, or similar metrics.
The distinction is not just structural. Payments tied to an index or rate follow completely different balance-sheet rules than payments tied to sales performance or physical usage, which shapes how both landlords and tenants report their financials.
How Percentage Rent Is Calculated
Percentage rent is the arrangement most people picture when they hear “contingent rent.” A clothing retailer in a shopping center might pay $150,000 a year in base rent plus 5% of gross sales above a certain threshold. That threshold is the breakpoint, and it is the single most important number in the calculation.
Natural and Negotiated Breakpoints
The natural breakpoint is the sales level at which the percentage formula would generate exactly the base rent amount. Divide the annual base rent by the percentage rate. With $150,000 in base rent and a 5% rate, the natural breakpoint is $3,000,000 in gross sales. The tenant pays no percentage rent until sales cross that line.
The parties can also negotiate an artificial breakpoint, set higher or lower than the natural one. A higher artificial breakpoint benefits the tenant by delaying the point at which percentage rent begins. A lower one benefits the landlord by triggering percentage rent sooner, though base rent is usually reduced to compensate.
The Payment Formula
Once sales exceed the breakpoint, the formula is straightforward: gross sales minus the breakpoint, multiplied by the percentage rate. If annual sales hit $4,000,000 against a $3,000,000 breakpoint at 5%, the contingent rent is $50,000. Percentage rates across the retail sector typically range from 5% to 15%, with restaurants and specialty retailers often at the higher end.
What Counts as Gross Sales
The definition of “gross sales” in the lease directly controls how much the tenant owes, and it deserves close attention. Most leases carve out certain categories from the reported figure. Common exclusions include returned merchandise, employee discounts, sales tax collected and remitted to the government, and gift card purchases (redemptions still count). Whether online sales fulfilled from the store count toward gross sales has become one of the most heavily negotiated points in modern retail leasing.
How Index-Based Rent Works
Index-based rent ties the payment to a published economic indicator, with the CPI-U being the most common benchmark. The lease specifies which index, which geographic area (national or a specific metro area), and the measurement period. A typical clause resets base rent annually by the percentage change in the national CPI-U over the prior 12 months.
If the base rent is $200,000 and the CPI increases 3.5% over the measurement period, the adjusted rent becomes $207,000. That new figure then serves as the starting point for the next year’s adjustment, creating a compounding effect over long lease terms. The structure is especially common in ground leases spanning 50 years or more, where fixed rent would lose most of its purchasing power over time.
Many index-based leases include a floor, a ceiling, or both. A floor guarantees the landlord at least some increase even if deflation occurs. A ceiling caps the annual adjustment, protecting the tenant in years of unusually high inflation. A lease might specify that rent adjusts by the CPI change but never less than 1% and never more than 4% in any single year.
How Usage-Based Rent Works
Usage-based rent appears most often in industrial and infrastructure leases. A tenant operating heavy machinery might pay base rent plus a per-hour charge once equipment usage exceeds a set monthly threshold. A toll road operator might pay a variable amount tied to vehicle count. The logic mirrors percentage rent: the payment scales with the economic benefit the tenant extracts from the property. The measuring stick is physical activity rather than revenue.
Reconciliation and Audit Rights
Base rent is typically due monthly in advance. Contingent rent follows a different cycle. Many percentage-rent leases require the tenant to make estimated monthly payments based on projected sales, with a formal reconciliation (often called a “true-up”) at the end of each quarter or fiscal year. The true-up compares estimated payments against actual performance and settles any difference, usually within 30 to 90 days after the tenant’s fiscal year closes.
For the true-up to work, the landlord needs reliable sales data. Leases almost always require the tenant to submit certified sales reports, and landlords negotiate audit rights on top of that. A standard audit clause gives the landlord the right to inspect the tenant’s books and records of gross sales. If the audit reveals an understatement above a specified threshold, commonly 3%, the tenant typically must pay the shortfall plus interest and reimburse the landlord’s audit costs.
Lease Provisions That Interact With Contingent Rent
Several other provisions ride alongside contingent rent, and ignoring them can lead to surprises for either party.
Kick-Out Clauses
A kick-out clause gives one or both parties the right to terminate the lease early if the tenant’s sales fail to reach a specified threshold within a set period. If the location is not generating enough revenue to justify the rent, the tenant benefits from an exit. The landlord benefits too, since weak tenant sales mean weak or zero percentage rent, and a different tenant might perform better in the space.
Kick-out clauses almost always require a significant period to pass before the termination right activates, often two to three years. The right is typically structured as a one-time election exercisable within a narrow window. When a kick-out is exercised, the departing tenant may need to reimburse the landlord for unamortized build-out costs and brokerage commissions.
Co-Tenancy Clauses
In retail centers, a smaller tenant’s sales often depend on foot traffic driven by anchor stores. A co-tenancy clause protects the smaller tenant if key anchors close or are not replaced within a set timeframe, usually 12 to 18 months. When co-tenancy triggers, the tenant’s rent obligation often drops to a percentage-of-sales-only basis, eliminating the fixed base rent until the anchor vacancy is filled. Some clauses go further and grant the tenant an outright termination right if the vacancy persists.
Accounting Treatment Under ASC 842
The current U.S. lease standard, ASC Topic 842, draws a sharp line between two categories of variable lease payments. Mixing them up is one of the most common errors companies make when implementing the standard, and it directly affects both the balance sheet and the income statement.
Performance-Based and Usage-Based Payments
Variable payments tied to future performance or usage, like percentage rent based on sales or charges based on machine hours, are excluded from the lease liability and the right-of-use (ROU) asset entirely. The standard states that lease payments “do not include variable lease payments other than those [that depend on an index or a rate].”1Financial Accounting Standards Board. Leases (Topic 842) – ASC 842-10-30-6 These payments are recognized as expense (for the tenant) or revenue (for the landlord) in the period the triggering event occurs. For percentage rent, that means the expense hits the income statement only when sales exceed the breakpoint.
The exclusion applies even when the tenant is virtually certain to owe some variable amount. The standard does not allow probability-based estimates for performance- or usage-linked payments. The one exception involves “in-substance fixed payments,” which are structured as variable but are functionally unavoidable. If the variability has no real economic substance, the payment is treated as fixed and included in the liability calculation.2Financial Accounting Standards Board. Leases (Topic 842) – ASC 842-10-30-5
Index-Based and Rate-Based Payments
Variable payments tied to an index or rate, like CPI-linked rent escalations, receive completely different treatment. They are included in the initial measurement of the lease liability and ROU asset, calculated using the index or rate in effect at the lease commencement date.3Financial Accounting Standards Board. Leases (Topic 842) – ASC 842-10-30-5(b) No future increases are assumed in the initial measurement. The lessee uses the current index value and projects that rate forward across the entire lease term.
When the index later changes and the rent resets, the difference between the original assumed payment and the new actual payment is recognized as expense in the period incurred. A standalone index change does not trigger a full remeasurement of the lease liability and ROU asset. Remeasurement for index-based adjustments happens only when another remeasurement event occurs simultaneously, such as a modification to the lease term or a change in the assessment of a purchase option.
IFRS 16 Differences
Companies reporting under International Financial Reporting Standards follow IFRS 16 rather than ASC 842, and the two standards diverge on a key point. Under IFRS 16, when an index changes and resets the contractual cash flows, the lessee must remeasure the lease liability and ROU asset at that time. ASC 842 does not require the standalone remeasurement. For multinational companies reporting under both frameworks, the result is two parallel lease accounting models for the same index-linked lease, with different liability balances and different expense timing in each set of books. Both standards agree on the treatment of performance- and usage-based variable payments: those are excluded from the lease liability and expensed as incurred.
Disclosure Requirements
ASC 842 requires both tenants and landlords to disclose specific information about variable lease payments in their financial statement footnotes. Tenants must disclose the basis and terms on which variable payments are determined, along with the total variable lease cost recognized during each reporting period.4Financial Accounting Standards Board. Leases (Topic 842) – ASC 842-20-50-3 and 842-20-50-4 The variable cost disclosure captures both payments that were never included in the lease liability (like percentage rent) and the incremental difference between the assumed index value and the actual amount paid on index-linked rent.
Landlords face parallel disclosure obligations for variable revenue earned during each period. Because performance-based contingent rent never appears on the balance sheet, these footnote disclosures are the only place investors can see how much of a company’s total occupancy cost is genuinely variable. For a retail tenant, the gap between the reported lease liability and the true total cost of occupancy can be substantial, and the disclosures are where that gap becomes visible.