What Is a Reinsurance Treaty? Types, Clauses, and Termination

A reinsurance treaty is a standing contract in which a primary insurer (the ceding company) automatically transfers an entire defined class of business to a reinsurer, and the reinsurer is obligated to accept every risk that fits the contract’s parameters. One agreement covers a whole book, whether that’s all homeowners policies, every commercial auto line, or a full casualty portfolio, rather than one policy at a time. The arrangement lets the primary insurer write far more business than its own capital would support, because a share of the exposure flows continuously to the reinsurer.

The defining feature is that neither party exercises discretion over individual risks. Once the treaty is signed, the ceding company must cede every qualifying risk and the reinsurer must accept it. The reinsurer prices the deal based on the overall quality and historical performance of the book, relying on the ceding company’s underwriting judgment rather than evaluating each policy. In exchange for accepting some less attractive risks alongside the good ones, the reinsurer gets volume and the ceding company gets predictable capacity. Most treaties operate on an annual renewal cycle, though some run until one party triggers a termination provision.

How Treaty Reinsurance Differs From Facultative

Facultative reinsurance works the opposite way. The ceding company offers a specific risk, and the reinsurer evaluates it individually and keeps the right to accept or reject. That makes sense for unusual or very large exposures that sit outside a treaty’s scope, but the negotiation overhead makes it impractical for everyday business. Most insurers use treaties as their baseline risk transfer tool and reserve facultative placements for outliers.

Proportional Treaties

Proportional treaties, sometimes called pro-rata, split premiums and losses between the two parties by a predetermined formula. The two main types are quota share and surplus share.

Quota Share

A quota share treaty applies a flat percentage to every policy in the covered book. Under a 50% quota share, the reinsurer takes 50% of every premium dollar and pays 50% of every loss dollar, including allocated loss adjustment expenses.1Society of Actuaries. Basics of Reinsurance Pricing The math is the same for every policy regardless of size or risk profile. That simplicity makes quota share easy to administer, but the ceding company gives up the same share of its most profitable policies as its least profitable ones.

In return for the ceded premium, the reinsurer pays the ceding company a ceding commission. This reimburses the primary insurer for acquisition costs (agent commissions, marketing, underwriting expenses) on business that now generates premium for the reinsurer. A common structure is a sliding scale commission that moves inversely with the loss ratio: when losses run low, the ceding company earns a higher commission; when experience deteriorates, the commission drops. The ceding company’s underwriting discipline directly affects what it earns.

Surplus Share

Surplus share treaties give the ceding company more control over what it keeps. The insurer sets a retention amount called a “line,” representing the maximum it keeps on any single risk. Only the exposure above that line passes to the reinsurer, up to a negotiated maximum expressed as a multiple of the line. If the ceding company retains a $200,000 line and the treaty provides four lines of capacity, the reinsurer covers up to $800,000 in excess of the ceding company’s retention on any one risk.

The reinsurer’s share of premium and losses tracks the proportion of each risk it assumes. On a $500,000 risk where the ceding company keeps $200,000, the reinsurer takes $300,000, or 60%. That same 60% applies to both premium and losses on that risk. Risks small enough to fall entirely within the retention don’t involve the reinsurer at all, so the insurer keeps 100% of the premium on its smaller exposures.

Non-Proportional Treaties

Non-proportional treaties, usually called excess of loss agreements, don’t divide individual premiums and losses by percentage. The reinsurer steps in only after losses exceed a specified dollar threshold called the attachment point. The ceding company absorbs everything below that point; the reinsurer covers everything above it, up to a contractual limit.

Per Risk Excess of Loss

A per risk layer protects against a single large claim on one policy. If the treaty attaches at $1 million with a $5 million limit, the ceding company pays the first $1 million of any individual loss, and the reinsurer covers the next $5 million. Losses that stay below $1 million never reach the reinsurer. Property insurers who occasionally write high-value risks rely on this structure.

Per Occurrence Excess of Loss

Per occurrence layers, often called catastrophe covers, respond to events that damage many policies simultaneously. A hurricane, wildfire, or major earthquake can trigger thousands of claims at once, and the per occurrence treaty aggregates them into a single loss for reinsurance purposes. The attachment point is typically high enough that only genuinely catastrophic events trigger it.

Aggregate Excess of Loss

Aggregate treaties protect against the cumulative weight of many smaller losses over a full policy year. The reinsurer’s obligation begins once total annual losses exceed a predetermined threshold, often expressed as a loss ratio percentage or a fixed dollar amount. It’s the safety net for years when nothing catastrophic happens but steady mid-sized losses erode profitability.

Premium for non-proportional coverage is typically calculated as a percentage of the ceding company’s total subject premium for the covered book, rather than a direct share of individual policy premiums. Pricing depends heavily on historical loss experience, catastrophe modeling, and the specific attachment point and limit.

The Clauses That Make the Contract Work

Treaty wording runs dozens of pages, but a handful of clauses carry outsized importance because they govern what happens when the relationship gets strained.

Insolvency Clause

An insolvency clause requires the reinsurer to continue paying claims even if the ceding company goes bankrupt. Without it, a reinsurer could argue its obligation runs only to a solvent ceding company, leaving policyholders exposed. The NAIC’s Credit for Reinsurance Model Law recommends states require insolvency clauses in reinsurance agreements, and nearly every state has adopted some version of this requirement.2National Association of Insurance Commissioners. Credit for Reinsurance Model Law A treaty missing this clause would prevent the ceding company from recording the reinsurance as an asset or deduction from liability on its statutory financial statements, so omitting it is a nonstarter.

Follow the Fortunes

The follow the fortunes doctrine prevents a reinsurer from second-guessing the ceding company’s claims decisions after the fact. As the Third Circuit put it, a reinsurer must pay as long as the ceding company’s “good-faith payment is at least arguably within the scope of the insurance coverage that was reinsured.”3United States Court of Appeals for the Third Circuit. North River Insurance Company v. CIGNA Reinsurance Company The reinsurer can push back only if the ceding company paid a claim clearly outside the policy’s coverage or acted fraudulently. If a reinsurer could relitigate every settlement, the automatic nature of the treaty would collapse.

Arbitration Clause

Most treaties require disputes to go to arbitration rather than court litigation. The typical panel is three people with industry experience, often retired insurance or reinsurance executives, with one selected by each party and a third chosen by the first two. Arbitration offers faster resolution and keeps commercially sensitive information out of public filings.

Errors and Omissions Clause

This clause prevents a clerical mistake from accidentally voiding coverage. If the ceding company fails to report a qualifying risk on time or miscodes a policy detail, the reinsurer’s liability still attaches as long as the error was unintentional.

Cut-Through Endorsement

Under a standard treaty, the policyholder has no direct relationship with the reinsurer. A cut-through endorsement changes that, giving the policyholder (or another third party) a direct right to collect from the reinsurer if the ceding company becomes insolvent or otherwise can’t pay. These endorsements are relatively uncommon and typically appear when a large commercial policyholder has enough negotiating leverage to demand one, or when the ceding company’s financial stability is questionable enough that the policyholder wants a backup.

Offset Clause

The offset (or setoff) clause lets both parties net their mutual obligations rather than exchanging gross payments. If the ceding company owes the reinsurer $400,000 in premium and the reinsurer owes the ceding company $600,000 in claim payments, only the $200,000 net amount changes hands. It looks like simple bookkeeping in normal times but becomes critical in insolvency, where a receiver might otherwise try to collect the full amount owed while paying out creditor claims at cents on the dollar.

How a Treaty Ends: Run-Off vs. Cut-Off

How a treaty terminates matters almost as much as how it operates. Under a run-off provision, the reinsurer remains liable for losses on every policy that was in force when the treaty terminated, even though no new business cedes after that date. If the treaty ends on December 31 but a covered homeowners policy doesn’t expire until the following June, the reinsurer still covers losses on that policy through June. Exposure gradually winds down as underlying policies expire or cancel.

Under a cut-off provision, the reinsurer’s liability ends immediately on the termination date. Any loss occurring after that date falls entirely on the ceding company, regardless of whether the underlying policy was in force during the treaty period. Cut-off is cleaner for the reinsurer but forces the ceding company to find replacement coverage or absorb the risk itself for all unexpired policies.

The choice often becomes a negotiating point at renewal. A reinsurer that wants out of a deteriorating book will push for cut-off; a ceding company that needs continuity will insist on run-off. Some treaties include a portfolio transfer mechanism that lets the ceding company buy out the reinsurer’s run-off liability with a lump-sum payment, giving both sides a clean break.

Settlement and Accounting

Day-to-day operation revolves around periodic accounting between the parties. The ceding company sends the reinsurer a detailed report (called a bordereau when the contract requires policy-level detail) listing individual premiums collected, policy numbers, inception dates, claims paid, reserves posted, and other transactional data. Some treaties allow summary accounting instead. The reporting period is typically monthly or quarterly, with financial settlements due within a set number of days after the period closes, often 45 to 60 days depending on the treaty terms.

For unusually large individual losses, the ceding company can invoke a cash call provision, requiring the reinsurer to advance funds immediately rather than waiting for the next scheduled settlement. The dollar threshold that triggers a cash call varies by treaty.

When the reinsurer isn’t licensed or accredited in the ceding company’s home state, the ceding company may hold back some or all of the premium that would otherwise flow to the reinsurer. These funds withheld serve as collateral, letting the ceding company take credit for the reinsurance on its statutory financial statements. The reinsurer records the withheld amount as an asset (“funds held by reinsured companies”) rather than cash.

Regulatory Credit for Reinsurance

A treaty is only as valuable as the regulatory credit the ceding company can claim for it. State insurance regulators control whether a ceding company can reduce its reported liabilities or record a reinsurance recoverable as an asset. Under the NAIC’s Credit for Reinsurance Model Law, credit is allowed only when the assuming reinsurer meets specific qualifying criteria.4National Association of Insurance Commissioners. Credit for Reinsurance Model Law The main pathways are:

  • Licensed. The reinsurer holds a license to transact insurance or reinsurance in the ceding company’s state.
  • Accredited. The reinsurer files evidence of submission to the state’s jurisdiction, consents to examination of its books, is licensed in at least one U.S. state, files annual financial statements, and demonstrates adequate financial capacity to the commissioner’s satisfaction.4National Association of Insurance Commissioners. Credit for Reinsurance Model Law
  • Certified. Non-U.S. reinsurers that meet financial strength rating requirements from recognized agencies can qualify for reduced collateral obligations rather than posting 100% collateral.

For reinsurers that don’t meet any of these criteria, the ceding company typically must hold collateral equal to 100% of the reinsurer’s obligations through trust accounts, letters of credit, or funds withheld to receive any balance sheet benefit. The qualification status of the reinsurer is one of the first things an insurer evaluates before entering a treaty.