A qualifying asset is one that takes a substantial period of time to get ready for its intended use or sale, which lets a company add the borrowing costs incurred during that preparation to the asset’s balance-sheet value instead of running them through the income statement as interest expense. The definition is essentially the same under the international standard (IAS 23) and the U.S. standard (ASC 835-20). The classification matters because it determines whether large amounts of interest hit earnings immediately or get spread across the asset’s useful life through depreciation.
What Makes an Asset Qualify
The test is straightforward. If the asset needs a substantial stretch of preparation before it can do what it is meant to do, it qualifies. Neither IAS 23 nor ASC 835-20 defines “substantial” in months, but the intent is clear. A warehouse that takes 18 months to build easily clears the bar. A delivery van driven off a dealer lot does not.
The reasoning is that interest incurred during construction or development is really part of what it costs to create the asset. If the company had not undertaken the project, it would not have carried the debt. Capitalizing the interest aligns the cost with the revenue the asset will eventually produce.
Common Types of Qualifying Assets
Physical infrastructure is the most obvious category. Power plants, manufacturing facilities, commercial high-rises, and large public works like bridges and railways all require years of engineering, site preparation, and construction before generating any return. The interest accumulated over those years can be substantial, and capitalizing it prevents the income statement from absorbing that hit while the asset sits unfinished.
Intangible assets can qualify too when the development timeline is long enough. A pharmaceutical compound working its way through years of clinical trials and regulatory review fits. So does internally developed software, though the rules there recently changed.
Software Development After ASU 2025-06
Before 2025, companies tracked software projects through rigid stages (preliminary, application development, and post-implementation) and could only capitalize costs during the middle stage. ASU 2025-06, issued in September 2025, scraps that model. Under the new guidance, capitalization begins when two conditions are met: management has authorized and committed to funding the project, and the project is probable to be completed and used as intended. Capitalization cannot start if “significant development uncertainty” remains, meaning the software involves unproven technology whose feasibility has not been confirmed through coding and testing, or the core performance requirements are still being substantially revised. The update is effective for annual periods beginning after December 15, 2027, with early adoption permitted.
Assets That Do Not Qualify
Anything ready to use or sell at the moment of purchase is automatically excluded. A company buying a fleet of trucks that can hit the road tomorrow cannot capitalize the interest on the purchase loan, regardless of size. The same goes for a fully leased office building or any other turnkey acquisition. Those interest costs go straight to the income statement.
Inventory produced in large quantities on a repetitive basis also falls outside the definition under U.S. GAAP, even when individual units take months to finish. The rules target unique, long-duration projects rather than routine production runs.
The Land Trap
Land purchased and held for speculation without active development does not qualify. The asset is already in its final form. But the moment physical development begins, the analysis changes. For tax purposes, the production period starts on the date the company performs actual physical work on the site, such as clearing, grading, excavating, or demolishing an existing structure. Planning and design activities alone do not trigger the start of the production period, nor do incidental repairs.1Internal Revenue Service. Interest Capitalization for Self-Constructed Assets
When Capitalization Starts, Pauses, and Stops
Under U.S. GAAP, three conditions must all be present at the same time before a company can begin adding interest to an asset’s cost:
- Expenditures are being made on the project, whether through payments to contractors, purchases of materials, or progress payments.
- Preparation activities are actively under way, including physical construction, engineering, or administrative permitting.
- Interest costs are being incurred, whether the borrowing is tied specifically to the project or is part of general corporate debt.
Capitalization continues for as long as all three conditions hold. Once any one drops away, capitalization pauses.
Suspension During Delays
If a company halts substantially all work on a project for an extended stretch, it must stop capitalizing interest until work resumes. Those holding costs are financing expenses at that point, not investment in the asset. But not every pause triggers a suspension. Brief interruptions, delays inherent to the process (like seasonal weather everyone planned around), and holdups imposed by outside regulators generally do not require stopping capitalization.2IFRS Foundation. IAS 23 Borrowing Costs IAS 23 uses a flood delaying bridge construction as its textbook example: if high water is common in that region during the construction season, capitalization continues because the delay was baked into the project from the start.
Reaching Substantial Completion
Capitalization stops when the asset is substantially complete and ready for its intended use or sale. That does not mean every punch-list item is finished or that the asset has begun generating revenue. It means the preparation activities that justified capitalizing interest are done. For a manufacturing plant, that typically means the facility can run at its designed output level. For a building, it means the owner can take beneficial occupancy. All subsequent interest goes to the income statement.
Calculating the Capitalized Amount
The amount of interest added to the asset is not simply whatever the company paid on its loans. Both IFRS and U.S. GAAP cap the figure and prescribe specific methods for computing it.
The Avoidable Interest Method Under U.S. GAAP
Under ASC 835-20, the goal is to capitalize only the interest the company could have avoided if it had never undertaken the project. The calculation works in two steps. First, the company computes its weighted-average accumulated expenditures for the asset during the period. Second, it applies an interest rate to that figure. If a specific borrowing is directly associated with the project, that borrowing’s rate applies up to the amount of the loan. Any expenditures exceeding the specific borrowing get a blended rate calculated from the company’s other outstanding debt. The resulting figure is the interest eligible for capitalization, but there is a hard ceiling: the company can never capitalize more interest than it actually incurred during the period.
One detail that trips people up is that accumulated expenditures are measured on a cash basis rather than an accrual basis (unless the accruals themselves bear interest). Amounts billed but not yet paid do not count.
Actual Costs Under IFRS
IAS 23 takes a slightly different approach. For funds borrowed specifically for the qualifying asset, the company capitalizes the actual borrowing costs incurred during the period, minus any investment income earned by temporarily parking those borrowed funds in short-term investments.2IFRS Foundation. IAS 23 Borrowing Costs For general borrowings used partly to fund the asset, the entity applies a weighted-average borrowing rate to the expenditures on the asset, excluding any borrowings already accounted for as specific. The same ceiling applies: capitalized borrowing costs cannot exceed total borrowing costs incurred during the period.
Where IFRS and U.S. GAAP Diverge
Although both frameworks require capitalization and share the same basic definition, a few differences can produce meaningfully different numbers. Under IFRS, income earned from temporarily investing specific-borrowing proceeds is deducted from the capitalizable amount; U.S. GAAP generally prohibits that offset, with a narrow exception for externally restricted tax-exempt borrowings. IFRS treats exchange-rate differences on foreign-currency loans as part of borrowing costs to the extent they adjust for interest, while U.S. GAAP excludes exchange-rate differences entirely. And U.S. GAAP requires suspension when abnormal delays halt work, whereas the tax rules under Section 263A do not allow suspension at all once production begins.
Tax Treatment Under Section 263A
Financial reporting rules and tax rules run on parallel tracks here, and they do not always reach the same destination. Section 263A of the Internal Revenue Code imposes its own interest capitalization requirements through the Uniform Capitalization (UNICAP) rules, and the scope is not identical to GAAP.
What Triggers Tax Capitalization
Under Section 263A(f), interest capitalization applies to “designated property,” which includes any produced property that meets one of three tests:3Office of the Law Revision Counsel. 26 USC 263A – Capitalization and Inclusion in Inventory Costs of Certain Expenses
- Real property, or tangible personal property with a class life of 20 years or more under Section 168.
- Any property whose estimated production period exceeds two years, regardless of cost.
- Property with an estimated production period exceeding one year and production costs exceeding $1,000,000.
A de minimis rule carves out small, short-duration projects: if the production period is 90 days or less and total expenditures stay under $1,000,000 divided by the number of days in the production period, the property is not treated as designated.4eCFR. 26 CFR 1.263A-8 Requirement to Capitalize Interest
Small Business Exemption
Businesses that meet the gross receipts test under Section 448(c) are entirely exempt from Section 263A, including its interest capitalization requirements. For taxable years beginning in 2025, the inflation-adjusted threshold is $31 million in average annual gross receipts over the prior three-year period.5Internal Revenue Service. Rev Proc 2025-28 The threshold adjusts annually for inflation. Tax shelters are ineligible for this exemption regardless of their receipts.
Where the Tax Rules Diverge From GAAP
The tax rules are broader than GAAP in some respects and narrower in others. Section 263A counts pre-production planning and raw-material purchases as part of accumulated production expenditures, while GAAP generally does not. The tax rules use only compound interest, whereas GAAP permits either simple or compound rates. The most consequential difference for construction projects is that the tax rules do not allow suspension of interest capitalization for delays once the production period has begun, so a company that pauses capitalization under GAAP may still be required to capitalize interest on its tax return. One narrow carve-out worth noting for producers of beer, wine, and distilled spirits: the aging period is excluded from the production period under Section 263A(f)(4), so a distillery aging bourbon for eight years does not capitalize interest across that entire span.
Financial Statement Disclosures
Companies that capitalize interest must disclose the total interest cost incurred during the period and the portion that was capitalized. Those figures let investors calculate how much interest actually hit the income statement versus how much was tucked into asset values. FASB has clarified that no special materiality test applies to interest capitalization; the standard materiality framework governs. If the capitalized amount is immaterial to income, the balance sheet, and other key measures, both individually and in the aggregate, a company may use minimum threshold levels to simplify its accounting. Those thresholds cannot be used to avoid capitalizing amounts that would be material under ordinary standards.6Financial Accounting Standards Board. Statement of Financial Accounting Standards No 42 – Determining Materiality for Capitalization of Interest Cost For entities capitalizing software costs under ASC 350-40 following ASU 2025-06, the disclosure requirements in ASC 360-10 for property, plant, and equipment now apply to those capitalized costs regardless of how they appear on the balance sheet.