What Is a Payroll Cycle? Frequencies, Processing, and Deposits

A payroll cycle is the recurring schedule a business follows to calculate wages, withhold taxes, and pay its employees. Each cycle has a pay period during which work is performed, a short processing window when hours are verified and deductions applied, and a pay date when funds actually reach employees. Most private employers in the United States run payroll biweekly, though weekly, semimonthly, and monthly schedules are all common.

The Four Parts of a Cycle

Every payroll cycle repeats the same four components on a fixed schedule:

  • Pay period start date: the first day employees begin logging hours or accruing salary for the upcoming paycheck.
  • Pay period end date: the cutoff when hours and earnings for the period stop accumulating.
  • Processing window: usually a few business days between the end of the pay period and the pay date, when payroll staff verify timecards, calculate overtime, apply deductions, and prepare tax withholdings.
  • Pay date: the day funds are deposited into employee bank accounts or physical checks are handed out.

The pay date almost always falls several days after the pay period ends because banks need time to process electronic transfers. Work performed in a given period does not become available cash until the pay date arrives.

How Often Employers Run Payroll

Businesses generally pick from four standard frequencies. Biweekly pay is the most common among private employers, used by about 36.5 percent of businesses, followed by weekly at 32.4 percent, semimonthly at 19.8 percent, and monthly at 11.3 percent.1Bureau of Labor Statistics. How Frequently Do Private Businesses Pay Workers?

  • Weekly: 52 pay runs per year. Common in construction, manufacturing, and food service. Employees are paid quickly, but the business handles more frequent processing.
  • Biweekly: 26 pay runs per year, with paychecks every other week. Some months contain three pay dates instead of two, which takes extra planning on both sides.
  • Semimonthly: 24 pay runs per year, typically on set dates like the 1st and 15th. This lines up neatly with monthly accounting and benefit calculations. Hourly employees may see checks vary more if pay periods contain different numbers of workdays.
  • Monthly: 12 pay runs per year. The lightest administrative load, but employees wait the longest between paychecks. More common for salaried professional or executive roles.

More frequent pay runs mean more administrative cost. Each cycle requires data entry, bank fees, and compliance checks, so the right choice depends on industry norms, workforce preferences, and internal resources.

Workweek Is Not the Same as Pay Period

A pay period and a workweek are two different things, and mixing them up is one of the most common payroll mistakes. Under the Fair Labor Standards Act, a workweek is a fixed, recurring block of 168 hours (seven consecutive 24-hour periods) that can start on any day and any hour you choose.2eCFR. 29 CFR 778.105 – Determining the Workweek Once you set the start time, it stays fixed unless you make a permanent change.

Overtime is always calculated per workweek, not per pay period. Any non-exempt employee who works more than 40 hours in a single workweek must receive at least one-and-a-half times their regular hourly rate for the extra hours.3Office of the Law Revision Counsel. 29 U.S. Code 207 – Maximum Hours If you run a biweekly cycle covering two workweeks, you cannot average the hours across both. An employee who works 50 hours in the first week and 30 in the second has earned 10 hours of overtime, even though the two-week total is 80 hours.

Overtime pay earned in a particular workweek is due on the regular pay date for the period in which that workweek ends.4eCFR. 29 CFR 778.106 – Time of Payment If the exact amount cannot be calculated in time, the employer must pay it no later than the following pay date.

What You Need Before Running a Cycle

Before your first payroll runs, you need several categories of data for every employee:

  • Workweek start day and time, so overtime can be calculated correctly.2eCFR. 29 CFR 778.105 – Determining the Workweek
  • Employee classification as either exempt (salaried and not entitled to overtime) or non-exempt (entitled to overtime pay). Classification depends on job duties and salary level, and getting it wrong can trigger back-pay liability.
  • A completed Form W-4 for every employee so you can withhold the correct amount of federal income tax.5Internal Revenue Service. About Form W-4, Employee’s Withholding Certificate
  • Timekeeping records for non-exempt employees, showing hours worked each day and each workweek. Time clocks, manual timesheets, or any system that captures actual hours will do.
  • Personal identifiers: full name, Social Security number, and home address for tax reporting and recordkeeping.

These feed into a payroll calendar: a master schedule showing when each cycle’s pay period begins and ends, when processing must be completed, and when employees will be paid.

Processing and Paying Employees

Once the pay period closes and hours are verified, processing follows a predictable sequence. For each employee, calculate gross pay, subtract federal and state income tax withholdings, subtract the employee’s share of Social Security and Medicare taxes, and apply any other deductions such as retirement contributions or health insurance premiums. What remains is net pay.

Most employers pay through an Automated Clearing House transfer. The employer sends a batch payment file to its bank, which routes the funds through the ACH network to each employee’s bank account.6Nacha. How ACH Payments Work ACH files generally need to be submitted a couple of business days before the pay date so the funds arrive on time. Employees who do not use direct deposit receive a physical check.

Pay Stubs

Federal law does not require employers to provide pay stubs.7U.S. Department of Labor. Questions and Answers About the Fair Labor Standards Act (FLSA) The FLSA does require accurate records of hours worked and wages paid. Most states have their own pay stub laws on top of that. Some require a written or printed statement with every paycheck; a handful have no mandate. Where a stub is required, it typically must show gross pay, deductions, and net pay at minimum.

Bonuses and Other Supplemental Wages

Bonuses, commissions, and other supplemental wages can be taxed differently from regular pay. For 2026, federal income tax on supplemental wages may be withheld at a flat 22 percent as long as the employee receives no more than $1 million in supplemental wages for the year. Amounts over $1 million are subject to a 37 percent withholding rate.8Internal Revenue Service. Publication 15 (2026), (Circular E), Employer’s Tax Guide

Tax Deposits and Returns

After each payroll run, you owe the federal government both the taxes withheld from employees and your matching share of Social Security and Medicare taxes. These deposits must be made electronically, and the IRS offers several free options including the Electronic Federal Tax Payment System.9Internal Revenue Service. Depositing and Reporting Employment Taxes

The IRS assigns every employer to either a monthly or semiweekly deposit schedule based on total tax liability during a lookback period.10Internal Revenue Service. Employment Tax Due Dates Monthly depositors deposit all employment taxes for payments made during a given month by the 15th of the following month. Semiweekly depositors deposit taxes for payments made Wednesday through Friday by the following Wednesday, and for payments made Saturday through Tuesday by the following Friday.

Your deposit schedule and your payroll frequency are independent. A business that runs biweekly payroll could still be on a monthly deposit schedule if its total tax liability is low enough.

Most employers also file Form 941 each quarter to report wages paid, tips received, and employment taxes owed. Form 941 is due by the last day of the month following the end of each calendar quarter. The first-quarter return covering January through March, for example, is due April 30.11Internal Revenue Service. Publication 509 (2026), Tax Calendars If a deadline falls on a weekend or federal holiday, the due date shifts to the next business day.

Federal and State Timing Rules

Federal law does not require any particular pay schedule. The FLSA’s only timing rule is that overtime compensation be paid on the regular pay date for the period in which the work was performed, and no later than the following pay date if the exact amount could not be calculated sooner.4eCFR. 29 CFR 778.106 – Time of Payment

State labor laws are often stricter. Many states set a minimum pay frequency, commonly at least twice per month, and some require weekly or biweekly pay for certain categories of workers such as manual laborers. When a regular pay date falls on a weekend or bank holiday, standard practice is to pay employees on the preceding business day, though some states allow payment on the next business day instead. Check your state labor department’s rules; failing to meet a state-mandated pay schedule can result in fines and additional penalties. An employer that violates the FLSA’s minimum-wage or overtime rules is also liable for the unpaid wages plus an equal amount in liquidated damages, on top of the employee’s attorney’s fees and court costs.12Office of the Law Revision Counsel. 29 U.S. Code 216 – Penalties

Records the Cycle Leaves Behind

Every payroll cycle creates records you are legally required to keep. Two separate federal rules apply. Under the FLSA, employers must maintain records for each employee showing full name, Social Security number, address, hours worked each workday and workweek, regular hourly rate, total straight-time and overtime earnings, deductions, and total wages paid each pay period, and preserve them for at least three years.13eCFR. 29 CFR Part 516 – Records to Be Kept by Employers The IRS requires all employment tax records, including amounts and dates of deposits, copies of filed returns, and employee wage information, to be kept for at least four years after the due date of the return for the fourth quarter of the year.14Internal Revenue Service. Employment Tax Recordkeeping

Because the IRS window is longer, keeping payroll records for at least four years satisfies both. Some states require longer retention, so verify your state’s rules before discarding anything.

When Someone Leaves Mid-Cycle

When an employee quits or is terminated, federal law does not require the final paycheck to be issued immediately. The FLSA only requires that the departing employee be paid by the next regular pay date for the period in which the work was performed.15U.S. Department of Labor. Last Paycheck Many states impose faster deadlines. Some require immediate payment upon termination, others allow several business days, and deadlines may differ depending on whether the employee resigned or was fired. Federal law does not require payout of unused vacation time; whether accrued vacation must be paid out depends on your state’s law and the terms of your company’s own policy or employment agreement.