What Is a Mortality Table? Types, Uses, and Court Admissibility

A mortality table is a statistical chart showing, for each age, the probability that a person in a defined population will die before their next birthday, along with how many years of life they can expect to have left. Insurance companies rely on these tables to price policies and set reserves, the IRS uses them to calculate required withdrawals from retirement accounts and to value trusts and annuities, and courts use them to estimate lost earnings in injury and wrongful death cases. The same underlying math touches a surprising range of financial and legal decisions.

What a Mortality Table Actually Shows

Every mortality table starts with a hypothetical group, usually 100,000 people, observed from the same starting age. The table then follows that group year by year. Four columns do most of the work:

  • Survivors (lx): how many people from the original group are still alive at that exact age.
  • Deaths (dx): how many died between that age and the next birthday.
  • Probability of death (qx): the chance that someone who reaches a given age will die before turning one year older.
  • Life expectancy (ex): the average number of full years of life remaining for someone who has reached that age.

The Social Security Administration publishes one of the most widely cited versions. Its 2022 period life table shows that a 65-year-old man has an average of 17.48 remaining years of life, and a 65-year-old woman has 20.12.1Social Security Administration. Actuarial Life Table Those two numbers reach into Social Security benefits, pension calculations, and courtroom damages testimony.

The Main Types

Not every mortality table is built the same way, and the design matters because it changes the predictions.

A period life table takes a snapshot of death rates across all ages during a single time window and applies those rates as if they will stay constant for the rest of a person’s life. The SSA table works this way. It is simpler to produce but tends to understate how long people will actually live, because it ignores future medical progress.

A cohort life table follows a specific group born in the same year and records their actual mortality as they age. Cohort tables are more accurate over long horizons, but you cannot finish one until the entire generation has died, so actuaries fill in the later years with projections.

Select and Ultimate

Life insurers draw a further distinction. Someone who has just passed a medical exam has lower mortality than the general population, and that screening advantage fades over time. A select table captures the lower mortality during that initial window; an ultimate table reflects the group’s experience once the screening effect has worn off. The transition period under standard regulatory frameworks is commonly around ten years.

Industry-Standard Tables

Insurers do not invent their own mortality assumptions from scratch. The 2017 Commissioners Standard Ordinary (CSO) Mortality Table is the current regulatory baseline for ordinary life insurance policies issued on or after January 1, 2020.2NAIC. 2026 Edition – Valuation Manual State regulators require insurers to use it as a minimum when calculating reserves and nonforfeiture values. Behind the CSO sits the Valuation Basic Table (VBT), which reflects raw industry experience and splits risks into finer categories than just smoker and nonsmoker. The CSO is derived from the VBT with margins of conservatism built in.

What Moves the Numbers

A single table for the whole population would be almost useless for pricing insurance. A 40-year-old nonsmoking woman and a 40-year-old male smoker working in commercial fishing have very different life expectancies, and lumping them together helps no one. Actuaries slice the data by age, gender, smoking status, occupation, and health classification to produce tables that reflect how specific groups actually live and die.

During underwriting, insurers adjust standard rates using individual information: prescription history, motor vehicle records, and medical exam results all feed into the risk classification. Carriers using accelerated underwriting, which waives some traditional medical requirements, generally price those policies with a mortality assumption 1 to 10 percent higher than fully underwritten policies to account for conditions the streamlined process might miss.3Society of Actuaries. Accelerated Underwriting Practices Survey

Gender and the Law

Gender is one of the strongest mortality predictors, and private life insurers still use gender-distinct tables to price individual policies in most states. Employer-sponsored retirement plans cannot. In Arizona Governing Committee v. Norris (1983), the Supreme Court held that using sex-based mortality tables to calculate retirement benefits violates Title VII of the Civil Rights Act. An individual woman cannot be given lower monthly annuity payments just because women as a class live longer.4Justia Law. Arizona Governing Comm. v. Norris, 463 U.S. 1073 (1983) Employer retirement plan benefits must be calculated without regard to sex.

Health insurance follows a separate rule. The Affordable Care Act banned gender-based premium differences in the individual health insurance market nationwide. Life insurance sits outside that prohibition.

Insurance Pricing and Pension Funding

Life insurance pricing comes down to one question: what is the probability this policyholder dies during the policy term, and how much does the company need to collect now to cover that risk? Mortality tables supply the probability. The insurer multiplies the death probability at each age by the benefit amount, discounts for expected investment returns, and arrives at a net premium. A wrong mortality assumption means either overcharged customers or thin reserves.

Pension funds face the mirror image. Instead of paying a lump sum at death, they pay monthly benefits for as long as a retiree lives. If retirees outlive the mortality table, the fund runs a deficit. That longevity risk is why federal rules require pension plans to use regularly updated tables. The IRS prescribes specific tables under IRC Section 430(h)(3) for calculating the present value of pension obligations, and refreshes them with mortality improvement scales that reflect the fact that people keep living longer.5Internal Revenue Service. Pension Plan Mortality Tables Plans that ignore those improvements systematically underfund their obligations.

A plan sponsor whose workforce has demonstrably different mortality than the general population can apply to use a plan-specific substitute table. The plan needs enough participants and history to produce credible data, and the substitute table must reflect both actual experience and projected trends.6Federal Register. Plan-Specific Substitute Mortality Tables for Determining Present Value

Required Minimum Distributions

Mortality tables touch ordinary retirees most directly through required minimum distributions. Once you reach age 73 (or 75 if you were born in 1960 or later), the IRS requires you to withdraw a minimum amount each year from traditional IRAs, 401(k)s, and similar tax-deferred accounts. The amount is your account balance divided by a life expectancy factor from an IRS table.7Internal Revenue Service. Retirement Plan and IRA Required Minimum Distributions FAQs

The IRS uses three tables for this purpose, all in Publication 590-B:

  • Uniform Lifetime Table (Table III), used by most IRA owners, including unmarried owners and married owners whose spouse is not more than ten years younger or is not the sole beneficiary.
  • Joint and Last Survivor Table (Table II), used when your spouse is both the sole beneficiary and more than ten years younger. The combined life expectancy is longer, so the required distribution is smaller.
  • Single Life Expectancy Table (Table I), used by beneficiaries who inherited an IRA.

These tables were last updated effective January 1, 2022, and still apply for 2026 calculations. To figure a 2026 RMD, you divide your account balance as of December 31, 2025, by the factor next to your 2026 age in the applicable table.8Internal Revenue Service. Publication 590-B (2025) – Distributions from Individual Retirement Arrangements (IRAs)

Missing an RMD is expensive. The excise tax is 25 percent of the shortfall between what you should have withdrawn and what you actually took. If you correct the mistake within the correction window, which generally runs through the end of the second tax year after the year the RMD was due, the penalty drops to 10 percent.9Office of the Law Revision Counsel. 26 U.S.C. 4974 – Excise Tax on Certain Accumulations in Qualified Retirement Plans

Section 7520 Valuation Tables

When you need to value a life estate, a charitable remainder trust, or a life annuity for gift and estate tax purposes, the IRS requires you to use the actuarial tables prescribed under IRC Section 7520. These tables combine mortality data with a specified interest rate to produce a present value for any stream of payments tied to someone’s life.10Office of the Law Revision Counsel. 26 U.S.C. 7520 – Valuation Tables

The Section 7520 rate equals 120 percent of the federal midterm rate, rounded to the nearest two-tenths of a percent. For the first few months of 2026, the rate has ranged from 4.6 to 4.8 percent.11Internal Revenue Service. Section 7520 Interest Rates A higher rate increases the present value of remainder interests and decreases the value of life estates, which directly changes the tax results of charitable gifts and estate transfers. The IRS revises the mortality component of these tables roughly every ten years to reflect updated life expectancy data.12Internal Revenue Service. Actuarial Tables

Mortality Tables in Court

In personal injury and wrongful death cases, mortality tables help translate a life into a dollar figure. When a 35-year-old worker is permanently disabled or killed, the court needs to estimate how many more years that person would have earned income or provided household services. A forensic economist looks up the person’s age on a life expectancy table, estimates remaining working years, and discounts projected lost earnings to present value. The SSA actuarial life table and tables referenced in state pattern jury instructions are common starting points.1Social Security Administration. Actuarial Life Table

The calculation involves more than reading a number off a chart. The economist must account for inflation, expected wage growth, the discount rate used to bring future dollars to present value, and whether the person’s individual health history points to a life expectancy different from the population average. A plaintiff with a serious pre-existing condition might have a shorter projected lifespan than the table average, and the defense will raise that point.

Admissibility of Mortality Evidence

Courts do not automatically accept any table an expert offers. In federal courts and the many states following the same framework, expert testimony involving mortality projections must satisfy Daubert v. Merrell Dow Pharmaceuticals. The judge acts as a gatekeeper and evaluates whether the methodology is scientifically reliable by considering whether the approach has been tested, subjected to peer review, has a known error rate, and is generally accepted in the field.13National Institute of Justice. Daubert and Kumho Decisions Government-published tables like the SSA life table generally clear this bar. The disputes tend to be over which table applies to a particular plaintiff, how the economist adjusted for individual risk factors, and whether the projection period is reasonable. The quality of that mortality evidence often decides whether a damages award lands in the hundreds of thousands or the millions.