What Is a Loan Estimate? Form, Tolerance Rules, and Revisions

A Loan Estimate is a standardized three-page form your mortgage lender must give you within three business days of receiving your application, laying out the interest rate, monthly payment, closing costs, and key terms of the loan you’ve applied for. Because every lender uses the same format, you can place two Loan Estimates side by side and compare them line for line. And because federal rules cap how much most of the fees can rise between the estimate and closing, the numbers on the form aren’t just marketing. They’re something you can hold the lender to.1Consumer Financial Protection Bureau. TILA-RESPA Integrated Disclosure FAQs

What’s on the Form

The layout is fixed by federal regulation, so you always know where to look.2eCFR. 12 CFR 1026.37 – Content of Disclosures for Certain Mortgage Transactions (Loan Estimate)

Page one gives you the headline numbers: loan amount, interest rate, and monthly principal and interest. A Projected Payments section shows how that monthly payment may change over time once taxes, insurance, and any mortgage insurance are included. At the bottom, Costs at Closing tells you the total estimated closing costs and the cash you’ll need to bring.

Page two itemizes the fees. Loan Costs are split into origination charges (what the lender charges to process and underwrite the loan, plus any discount points you’re paying to buy down the rate), services you can’t shop for (third-party services the lender picks, like the appraisal), and services you can shop for (title search, settlement agent, and similar). Other Costs covers government recording fees and transfer taxes, prepaid items such as the daily interest between closing and your first payment, and the initial deposits into your escrow account.

Page three is built for comparison. Three numbers here deserve attention. The Annual Percentage Rate folds fees and other costs into a single yearly rate, which is usually higher than the stated interest rate and gives you a truer picture of what credit costs. The Total Interest Percentage shows the total interest you’d pay over the full term as a percentage of your loan amount, which on a 30-year fixed is often startling. And the “In 5 Years” figure shows how much you’ll have paid in principal and interest after sixty months and how much principal you’ll actually have knocked down.3Consumer Financial Protection Bureau. Loan Estimate Explainer

When You Get One and How Long It’s Good For

The three-business-day clock starts the moment the lender has six pieces of information from you: your name, your income, your Social Security number, the property address, an estimate of the property’s value, and the loan amount you want. That’s it. You don’t need to produce bank statements or tax returns to trigger the Loan Estimate requirement. Once you’ve handed over those six items, the lender owes you the form.1Consumer Financial Protection Bureau. TILA-RESPA Integrated Disclosure FAQs

The rate and terms on the estimate don’t sit open indefinitely. If you don’t tell the lender you want to move forward within ten business days, the lender can treat the estimate as expired and reissue it based on current market conditions. Some lenders set a shorter window; whatever period the Loan Estimate itself specifies controls, and the ten-day rule is the default.4eCFR. 12 CFR 1026.19 – Certain Mortgage and Variable-Rate Transactions

Using It to Compare Lenders

Because the format is identical from one lender to the next, the comparison work is unusually clean. Line up two or three Loan Estimates and look at the same cells on each. The APR tells you more than the interest rate alone, because a lower rate paired with heavy origination fees often produces a higher APR than a slightly higher rate with lower fees. The Total Interest Percentage lets you see which loan actually costs less over time. The In 5 Years figure matters if you don’t expect to keep the loan for its full term.

You can collect Loan Estimates from several lenders without committing to any of them. Until you tell a lender you want to proceed, that lender can’t charge you anything beyond the cost of pulling your credit report, which in 2026 can run $50 or more per applicant since lenders typically order a report from all three bureaus.5Consumer Financial Protection Bureau. TILA-RESPA Integrated Disclosure Rule – Small Entity Compliance Guide Shopping around is how the system is designed to work.

Why the Numbers Are Binding: Tolerance Rules

The reason the Loan Estimate has real force is that most of its fees are legally capped against the final numbers at closing. Every fee on the form falls into one of three categories.4eCFR. 12 CFR 1026.19 – Certain Mortgage and Variable-Rate Transactions

Zero tolerance. Fees paid to the lender or its affiliates can’t go up at all between the estimate and closing. This covers origination charges, discount points, transfer taxes, and any third-party service the lender picked for you (such as an appraisal from the lender’s chosen vendor). A $1,500 origination fee on the Loan Estimate has to be $1,500 at closing. Any increase without a valid reason is a violation.

Ten percent cumulative tolerance. Recording fees, and services you shopped for by choosing a provider from the lender’s written list, are capped as a group. Individual line items can move up or down, but the combined total of all these fees at closing can’t exceed the combined total on your Loan Estimate by more than ten percent.

No tolerance limit. Prepaid interest, property insurance premiums, escrow deposits, property taxes, and charges for providers you picked entirely on your own can change without a hard cap, because they depend on things the lender genuinely can’t lock down in advance. The lender still has to base the original estimate on the best information available at the time.

If a lender exceeds the zero-tolerance or ten-percent limits without a valid reason, it has to refund the excess to you within 60 days of closing and send a corrected Closing Disclosure. If you catch an overcharge and the lender won’t fix it, you can file a complaint with the Consumer Financial Protection Bureau.

One wrinkle on the ten-percent category: it only protects you for providers you picked from the lender’s list. Go off-list and choose your own title company or settlement agent, and that fee shifts into the no-tolerance category.6Consumer Financial Protection Bureau. TILA-RESPA Integrated Disclosure Rule: Small Entity Compliance Guide Picking from the list buys you a tighter cap; going off-list buys you more choice and less certainty.

When the Lender Can Revise It

The estimate isn’t absolutely frozen. A lender can issue a revised Loan Estimate, and must do so within three business days of learning about the triggering change, when any of the following happens:4eCFR. 12 CFR 1026.19 – Certain Mortgage and Variable-Rate Transactions

  • A changed circumstance affects costs (an unexpected event outside anyone’s control, or information from the original application that doesn’t hold up during verification).
  • A changed circumstance affects your eligibility for the terms originally offered.
  • You request a change, such as switching loan products or adjusting the loan amount.
  • You lock a rate that wasn’t locked when the first estimate was issued.
  • Your intent-to-proceed window expires.
  • Closing on a construction loan is reasonably expected to occur more than 60 days out, and the original estimate disclosed that a revision might follow.

When a revised estimate is issued, the tolerance limits reset against the new numbers. That makes it worth noticing whether a revision has a legitimate trigger behind it or looks like the lender walking back a lowball original.

Telling the Lender You Want to Proceed

Once you’ve picked a Loan Estimate you want to move forward with, you tell the lender. A phone call, email, or any other clear communication works.7Consumer Financial Protection Bureau. My Loan Officer Said That I Need to Express My Intent to Proceed This is called expressing your intent to proceed, and only at that point can the lender charge you anything beyond the credit report fee. Full underwriting begins. If you haven’t locked your rate yet, this is usually when that conversation happens.

From Loan Estimate to Closing Disclosure

Shortly before closing, the Loan Estimate is replaced by a five-page Closing Disclosure showing the final, actual costs. You must receive it at least three business days before closing, counting every calendar day except Sundays and federal holidays.8Consumer Financial Protection Bureau. What Is a Closing Disclosure

Use that window. Set the Closing Disclosure next to your Loan Estimate and compare the fees line by line. If anything in the zero-tolerance or ten-percent categories jumped without a documented revision, raise it with the lender before you sign. Fixing an overcharge before closing is far easier than chasing a refund after.

Three specific changes to the Closing Disclosure restart the three-day waiting period: an APR increase beyond a defined accuracy threshold, the addition of a prepayment penalty, or a change in the loan product itself (for example, fixed to adjustable).1Consumer Financial Protection Bureau. TILA-RESPA Integrated Disclosure FAQs Minor corrections to other figures don’t restart the clock.

Loans That Don’t Come With a Loan Estimate

Not every mortgage product uses this form. Home equity lines of credit, reverse mortgages, loans secured by a mobile home not permanently attached to land, no-interest second mortgages for down-payment assistance or similar programs, and loans from very small creditors (five or fewer mortgages per year) are all outside the Loan Estimate framework.9Consumer Financial Protection Bureau. 12 CFR 1026.40 Requirements for Home Equity Plans HELOCs in particular follow their own disclosure rules, which is why borrowers applying for one often wonder why no Loan Estimate ever showed up. The information is still disclosed; it just arrives in a different format.