A construction lender is a bank or mortgage company that finances a building project in stages, releasing money only as verified work gets done and charging interest only on what has actually been disbursed. Instead of lending against a finished home’s appraised value, a construction lender underwrites blueprints, a line-item budget, the builder’s track record, and an “as-completed” valuation that estimates what the property will be worth once construction is finished. That makes the relationship more hands-on than a standard mortgage: the lender behaves less like a silent creditor and more like a project manager with a checkbook.
How the Lender Stays Involved During the Build
Funds sit in an escrow-style account and are released in draws only after an independent inspector confirms that completed work matches the approved budget.1eCFR. 13 CFR 120.961 – Construction Escrow Accounts The lender’s oversight also extends to whether the project complies with building codes, zoning, subdivision regulations, and disability access laws.2Federal Deposit Insurance Corporation. Construction and Land Development Lending Core Analysis If the contractor falls behind or the work misses approved specifications, the lender can freeze disbursements until the problem is corrected. That mechanism is what keeps a half-finished house from becoming a total loss for everyone with money in it.
The Loan Structures a Construction Lender Offers
Single-Close (Construction-to-Permanent)
A single-close loan wraps the building phase and the permanent mortgage into one transaction. You go through underwriting once, pay one set of closing costs, and the loan automatically converts to a standard mortgage when the home is finished. Fannie Mae limits the construction phase on these loans to 18 months; if your build will take longer, you’ll need a two-close structure instead.3Fannie Mae. FAQs: Construction-to-Permanent Financing Most borrowers prefer this option because it removes the risk of not qualifying for a mortgage after the build is done.
Two-Close (Stand-Alone Construction Loan)
A two-close loan uses separate transactions for the construction phase and the permanent financing. The first closing secures the building funds (and may include the lot purchase), and a second closing refinances that debt into a permanent mortgage once the improvements are complete.4Fannie Mae. Two-Closing Construction to Permanent Financing Transaction Process You pay closing costs twice and go through a second round of underwriting near the end of the build, so your credit, income, and the property’s appraised value all get re-evaluated. The trade-off is flexibility: if you expect rates to drop before the build wraps up, or you need more than 18 months of construction time, the two-close route leaves your permanent financing open.
Government-Backed Options
FHA offers a one-time close construction loan requiring as little as 3.5% down and a minimum credit score of 620, though it’s limited to single-family primary residences and excludes unconventional building styles like barndominiums, tiny homes, and shipping container houses. The borrower cannot act as their own general contractor. VA one-time close loans are available to eligible veterans with no down payment required, and the builder absorbs the interest costs during construction so the veteran’s first payment doesn’t start until after the home is complete. Neither program requires requalification at conversion.
Renovation Loans
Not every construction loan involves breaking ground on bare land. FHA’s 203(k) Limited program lets homebuyers and current owners finance up to $75,000 in repairs or upgrades into their mortgage.5U.S. Department of Housing and Urban Development. 203(k) Rehabilitation Mortgage Insurance Program Types The Standard 203(k) handles larger renovations with no dollar cap beyond the area’s FHA loan limits. On the conventional side, Fannie Mae’s HomeStyle Renovation mortgage covers one- to four-unit primary residences, one-unit second homes, investment properties, and manufactured homes, though manufactured home renovations must be non-structural.6Fannie Mae. HomeStyle Renovation Mortgages: Loan and Borrower Eligibility Renovation loans in condos or co-ops require written HOA approval and are generally limited to interior work.
What a Construction Lender Wants Before Approval
Applications are heavier than a standard mortgage’s because the lender is underwriting both you and the project. Expect to provide personal financial statements, tax returns, and proof of income. Credit score requirements vary by loan type: conventional construction loans generally want 680 or above, while FHA and VA programs accept lower scores. Down payments follow a similar split. Conventional lenders often want 20% to avoid mortgage insurance, FHA requires 3.5%, and VA-eligible borrowers may put nothing down.
The project documentation is where construction loans diverge sharply from regular mortgages. You’ll need blueprints, a detailed line-item budget from the builder or architect, and proof you own the lot or have a purchase agreement in place. Every anticipated cost, from site preparation through final fixtures, has to line up with the builder’s contract. Lenders use these documents to order an “as-completed” appraisal, which estimates the home’s market value once finished rather than the current value of the dirt.
The lender vets the builder independently. FDIC examination guidelines direct lenders to look at the contractor’s construction experience, payment history to suppliers and subcontractors, credit reports, and insurance covering builder’s risk, workers’ compensation, and public liability.2Federal Deposit Insurance Corporation. Construction and Land Development Lending Core Analysis If your builder can’t produce these records, the lender won’t approve the loan regardless of your personal finances. This is where many first-time custom-home borrowers hit a wall: the builder you like may not meet the lender’s requirements.
How Payments and Draws Work
During the build, you make interest-only payments calculated on the amount that has actually been disbursed, not the full loan balance. If you’ve drawn $120,000 of a $400,000 loan, you’re paying interest on $120,000. Each new draw increases the balance and bumps up your monthly payment. Construction loan rates are typically variable and run higher than standard mortgage rates. In early 2026, most bank-financed construction loans fall in the range of roughly 6.5% to 9.5%, with higher-risk or more flexible structures reaching into double digits. Single-close loans may allow a rate lock for the permanent mortgage phase at closing, but the construction period itself usually carries a variable rate. Budget for both the low early interest-only payment and the full permanent mortgage payment before you sign.
The Draw Schedule
Construction lenders don’t hand over the loan proceeds in a lump sum. Funds are released through a draw schedule tied to specific construction milestones such as foundation, framing and roof, rough mechanicals, insulation and drywall, interior finishes, and final completion. A typical residential build uses four to eight draws, agreed upon at closing. After each phase, the builder submits a draw request and the lender sends an independent inspector to verify that completed work matches the approved budget before releasing funds.2Federal Deposit Insurance Corporation. Construction and Land Development Lending Core Analysis Inspection frequency varies. Some lenders inspect monthly on a predictable schedule, others show up with little notice. Each inspection typically costs the borrower $100 to $150, and those fees add up over six or more draws, so the loan agreement should spell out exactly how many inspections are included and what additional ones cost.
Retainage
The lender withholds a percentage of each draw, known as retainage, until the project is fully complete. The standard holdback is 10%, though actual requirements range from 5% to 15% depending on the lender and the project’s risk profile. On a $50,000 draw, the builder might receive $45,000 immediately and wait for the remaining $5,000 until the home passes final inspection. Retainage gives the builder a financial incentive to finish the job, including the small punch-list items that tend to linger at the end. The final retainage is typically released after the local government issues a certificate of occupancy.
Lien Waivers
Before releasing each draw, most lenders require the builder to submit lien waivers from subcontractors and suppliers. A lien waiver is a signed document in which a subcontractor confirms they’ve been paid for the work covered by the previous draw and gives up the right to file a mechanic’s lien against your property for that amount. Conditional waivers take effect only after payment actually clears; unconditional waivers are effective immediately upon signing. Loan agreements routinely require the contractor to submit appropriate lien waiver forms before each disbursement.2Federal Deposit Insurance Corporation. Construction and Land Development Lending Core Analysis Paying your general contractor does not guarantee that subcontractors and material suppliers have been paid. Lien waivers are the only documentation that confirms it.
Cost Overruns and the Contingency Reserve
Almost no construction project finishes at exactly the original budget. Material prices shift, site conditions surprise everyone, and design changes happen. Lenders know this, which is why most require a contingency reserve. For FHA 203(k) loans, HUD sets the contingency between 10% and 20% of the planned repair costs, depending on the structure’s age and condition.7FHA Connection. Standard 203(k) Contingency Reserve Requirements Conventional construction lenders set their own contingency requirements, but the 10% to 15% range is common.
When costs exceed the original budget, the borrower or builder must submit a change order requesting a budget modification, and no work on the changed scope should begin until the lender approves the revised figures. If the contingency reserve can absorb the overage, the process is relatively painless. If the overrun exceeds the reserve, the borrower typically has to bring additional cash to the table, because the lender won’t increase the loan amount just because the project got more expensive. That is the scenario that sinks builds: the borrower runs out of contingency funds, can’t contribute more capital, and the project stalls.
When Things Go Wrong
Builder Default or Abandonment
If your builder walks off the job, goes bankrupt, or simply stops performing, the lender will suspend future draw payments and effectively freeze the project. Everyone involved knows that switching builders mid-project is expensive and that an unfinished building sells at a steep discount, which gives the original builder leverage in any negotiation, even a builder who caused the problem.8Federal Deposit Insurance Corporation. Determinants of Losses on Construction Loans: Bad Loans, Bad Banks, or Bad Markets? Your options usually come down to negotiating with the existing builder to resume work, hiring a replacement contractor (which almost always costs more than the original contract), or defaulting on the loan. Many construction loan agreements include a completion guarantee from the borrower or a guarantor, requiring them to finish the project on time, lien-free, and in accordance with approved plans even if the original builder fails. Read that clause carefully before signing. The obligation can survive the builder’s departure.
Loan Expiration
Construction loans have hard maturity dates, and they’re shorter than most borrowers expect. If the build isn’t finished when the loan matures, the entire principal balance and accrued interest become due immediately. The lender is no longer obligated to release remaining draws, even if hundreds of thousands in approved funds sit untouched. Most lenders offer extensions of three to six months for a fee ranging from 0.25% to 1% of the total loan commitment. On a $500,000 loan, that’s $1,250 to $5,000 for a few extra months of breathing room.
If you can’t get an extension or can’t pay off the balance, the loan enters technical default. Default interest rates commonly spike 5% or more above the original note rate, and the lender may begin foreclosure proceedings. The best defense is padding your construction timeline from the start. Weather delays, permit backlogs, and material shortages are normal, not exceptional. If your builder quotes 10 months, plan for 14.
Converting to a Permanent Mortgage
The finish line for a construction loan is conversion to permanent financing. Before the lender (or, in a two-close structure, the new lender) will close the permanent mortgage, all construction work must be completed and paid for, every mechanic’s lien or materialman’s lien tied to the construction must be satisfied, the lender must have a final inspection report confirming the completed home matches the approved plans, and the local government must have issued a certificate of occupancy.9Fannie Mae. Conversion of Construction-to-Permanent Financing: Overview You’ll also need proof of a homeowners insurance policy effective before the conversion date.
For single-close loans, the transition is largely administrative because you’ve already locked in your permanent terms. For two-close loans, conversion is a full refinance with new underwriting, a new appraisal, and a new set of closing costs.4Fannie Mae. Two-Closing Construction to Permanent Financing Transaction Process The two-close borrower faces real risk at this point: if the finished home appraises lower than expected, or if your financial situation has changed since the construction loan closed, you could struggle to qualify for the permanent loan. That gap between construction loan payoff and permanent financing approval is where deals fall apart.