A bid guarantee is security a contractor submits along with a construction bid, promising the project owner two things: the contractor won’t withdraw the bid during the acceptance period, and if awarded the contract, the contractor will sign it and deliver the required performance and payment bonds. If the winning bidder backs out, the owner keeps the guarantee to cover the extra cost of hiring the next bidder in line. On federal construction contracts, the guarantee must be at least 20 percent of the bid price, capped at $3 million.1Acquisition.GOV. 48 CFR 28.101-2 – Solicitation Provision or Contract Clause
The Risk It Covers
The guarantee is sized against a specific loss: the gap between the winning bid and the next acceptable bid if the winner defaults. A contractor bids $5 million, walks away, and the next bidder priced the work at $5.8 million. The owner is now looking at an $800,000 overrun. The bid guarantee exists to absorb that difference.2Acquisition.GOV. 48 CFR 52.228-1 – Bid Guarantee
That function also works as a screen. A contractor who can obtain a bid guarantee has already passed a third-party look at finances and capacity, which filters out bidders who could not realistically perform the work or produce the follow-up bonds.
How Much the Guarantee Has to Be
For direct federal procurement, the contracting officer sets the guarantee at a minimum of 20 percent of the bid price, with a hard ceiling of $3 million.1Acquisition.GOV. 48 CFR 28.101-2 – Solicitation Provision or Contract Clause A $2 million bid needs at least $400,000 in assurance. A $20 million bid would mathematically require $4 million, but the cap limits the guarantee to $3 million.
Projects funded through federal grants rather than direct federal procurement run on a different number. Under 2 CFR 200.326, the bid guarantee is 5 percent of the bid price.3eCFR. 2 CFR 200.326 – Bonding Requirements Many state and local projects are grant-funded and follow that lower figure.
States also have their own bonding statutes, often called “Little Miller Acts,” that cover state-funded public works. Dollar thresholds vary widely by state. In every case, the exact percentage or dollar amount for a given project is spelled out in the solicitation.
What Counts as a Bid Guarantee
The Federal Acquisition Regulation defines a bid guarantee broadly as any form of security assuring the bidder won’t withdraw and will sign the contract and furnish required bonds if selected.4Acquisition.GOV. 48 CFR 28.001 – Definitions Three instruments do almost all the work in practice.
Bid Bonds
A bid bond is the dominant form on large construction projects. A surety company issues the bond, promising to pay the owner if the contractor defaults after winning. The contractor pays a premium, and the guarantee is backed by the surety’s balance sheet rather than the contractor’s cash.
Premiums are typically modest, and many sureties issue the bid bond at no additional charge when the contractor is also buying the follow-up performance and payment bonds from them. Before issuing the bond, the surety underwrites the contractor’s financials, project history, and capacity, which is why owning a bid bond also signals the contractor has cleared a credit review.
The arrangement involves three parties: the principal (contractor), the obligee (project owner), and the surety (guarantor). If the contractor defaults, the surety pays the obligee and then pursues the contractor for reimbursement under the indemnity agreement signed when the bond was issued.
Certified or Cashier’s Checks
A certified check or cashier’s check deposits actual funds with the owner as collateral. The owner holds the check until the contract is either awarded elsewhere or formally executed by the winning bidder.2Acquisition.GOV. 48 CFR 52.228-1 – Bid Guarantee
The tradeoff is cash flow. A $10 million federal bid with a 20 percent guarantee ties up $2 million in liquid capital for the duration of the bidding process. Contractors bidding on several projects at once can see working capital stretched thin quickly, which is why bid bonds dominate at larger dollar amounts.
Irrevocable Letters of Credit
An irrevocable letter of credit shifts the guarantee to a bank’s commitment. The bank agrees to pay the owner the stated amount on demand, provided the demand meets the letter’s terms, and cannot withdraw that commitment before the expiration date. Banks typically require full collateral to issue one of these, so the cash impact mirrors a certified check, but the owner gets a guarantee backed by the bank’s credit. Letters of credit show up more frequently on contracts in the $35,000 to $150,000 range, where the FAR specifically lists them as an acceptable payment protection.5Acquisition.GOV. 48 CFR 28.102-1 – General
What Happens After Bids Open
The guarantee’s fate depends on whether the contractor wins.
Losing Bidders
Guarantees from contractors who did not win are returned as soon as practicable after bids open. Certified and cashier’s checks are physically returned. Bid bonds are voided by the surety, ending liability.2Acquisition.GOV. 48 CFR 52.228-1 – Bid Guarantee The FAR does not set a fixed return deadline, though some solicitations impose one.
The Winner
The winning contractor’s guarantee stays active until two things happen: the contract is signed, and the required performance and payment bonds are delivered.2Acquisition.GOV. 48 CFR 52.228-1 – Bid Guarantee The guarantee bridges the window between award and the deal being fully executed. Once the follow-up bonds are in place, the guarantee is released.
Forfeiture
Forfeiture happens when the winning bidder refuses to sign the contract or fails to furnish the required performance and payment bonds in time. The owner claims against the guarantee to cover the cost of awarding to the next-lowest bidder.
How much the owner actually recovers depends on how the bid bond was written. Some bonds operate on a damages basis: the surety pays only the price difference between the defaulting bidder and the replacement, up to the face value. Others operate on a forfeiture basis, where the full face value is owed regardless of actual loss. The bond’s language controls which standard applies, and reading that language carefully matters on both sides of the transaction. If the guarantee was a certified check, the owner keeps the deposited funds; depending on jurisdiction and contract terms, the contractor may be able to seek return of any amount above the owner’s actual damages.
When a surety pays out, it then pursues the contractor for reimbursement under the indemnity agreement. Defaulting on a bid bond also makes it considerably harder to secure bonding on future projects.
When a Missing or Defective Guarantee Can Be Waived
A missing or deficient bid guarantee normally means automatic rejection. Federal regulations treat the guarantee as a material requirement, and failing to include one renders the bid non-responsive.6Acquisition.GOV. 48 CFR 28.101-4 – Noncompliance With Bid Guarantee Requirements
The FAR identifies specific situations where the contracting officer can waive the problem instead of rejecting the bid:
- Only one offer was received. The officer may require the guarantee before award rather than reject the sole bid.
- The submitted amount is short but still equals or exceeds the price gap between that bidder and the next higher acceptable offer.
- The guarantee arrives late and the general rules on late bids allow acceptance.
- The bond has minor defects, such as being unsigned, misdated, or naming the wrong obligee, but otherwise correctly identifies the bidder and project.6Acquisition.GOV. 48 CFR 28.101-4 – Noncompliance With Bid Guarantee Requirements
The chief of the contracting office can also waive the bid guarantee requirement entirely for specific acquisitions where it would not serve the government’s interest, such as overseas construction, emergency procurements, or sole-source contracts.7eCFR. 48 CFR 28.101-1 – Policy on Use
How the Bid Guarantee Connects to the Bonds That Follow
The bid guarantee is only the opening layer of protection. Once a contractor wins, heavier bonding kicks in. For federal construction contracts exceeding $150,000, the contractor must furnish both a performance bond and a payment bond, each set at 100 percent of the original contract price.8Acquisition.GOV. 48 CFR 28.102-2 – Amount Required If the contract price rises through change orders, the bond amounts rise proportionally.9Acquisition.GOV. 48 CFR 52.228-15 – Performance and Payment Bonds Construction
The performance bond protects the government if the contractor fails to complete the work. The payment bond protects subcontractors and material suppliers, guaranteeing they get paid even if the general contractor defaults.10Office of the Law Revision Counsel. 40 USC 3131 – Bonds of Contractors of Public Buildings or Works Both must be in place before work starts. Failing to produce them is exactly the kind of default that triggers forfeiture of the bid guarantee, which is why the guarantee works as an early filter: a contractor who cannot clear the smaller hurdle will not clear the much larger one that follows.
For federal contracts between $35,000 and $150,000, the rules are lighter. The contracting officer selects from a menu of payment protections rather than requiring full performance and payment bonds.5Acquisition.GOV. 48 CFR 28.102-1 – General Below the federal thresholds, state Little Miller Acts and local rules take over, and the specific guarantee requirement is always written into the solicitation documents for the project at hand.