A 401(k) true-up is a year-end catch-up deposit from your employer that delivers the full annual match your plan promised, even when the per-paycheck match ran out early. It fixes a timing problem: if you front-load your contributions and hit the IRS deferral limit before December, the payroll system stops matching for the rest of the year, and without a true-up that lost employer money is gone for good. Not every plan includes one, and knowing whether yours does can be worth thousands of dollars.
Why the Per-Paycheck Match Runs Out
Most employers calculate matching on a per-pay-period basis. Each paycheck, the system looks at what you deferred that period, applies the formula, and deposits the match. If your plan matches 100% on the first 6% of pay and you defer 6% that period, you get the full match. Fine when contributions flow evenly all year.
The trouble starts when you defer at a higher rate and hit the IRS elective deferral limit before year-end. For 2026 that limit is $24,500.1Internal Revenue Service. 401(k) Limit Increases to $24,500 for 2026, IRA Limit Increases to $7,500 Once your deferrals stop, the per-paycheck match stops with them. For the remaining pay periods the employer contributes nothing, because payroll sees zero employee deferrals to match against. That’s the lost-match problem, and it can carve a real chunk out of the employer contribution you were counting on.
A true-up provision closes the gap. After the plan year ends, the employer compares your total annual deferrals and total annual compensation against the matching formula to figure out what you should have received for the whole year. If per-period matches fell short, the employer deposits the difference.
How the True-Up Is Calculated
Three numbers do the work: what you should have received, what you actually received, and the gap.
Step One: The Maximum Potential Match
Apply the plan’s matching formula to your total eligible compensation for the year. If the plan matches 100% on the first 6% of pay and you earned $100,000, your maximum potential match is $6,000. That’s the ceiling, regardless of contribution timing.
Step Two: What You Actually Got
Add every employer matching deposit that hit your account during the year. If you front-loaded and reached the deferral limit in October, matches landed for ten months, not twelve.
Step Three: The Difference
Subtract the actual from the maximum. A positive number is your true-up. Zero or negative means the plan already paid the full match and nothing more is owed.
A Worked Example
You earn $100,000, the plan matches 100% on the first 6%, you’re paid monthly, and you contribute roughly $2,450 a month to max out the $24,500 deferral limit by October.2Internal Revenue Service. Retirement Topics – Contributions
- Maximum potential match: 6% of $100,000 = $6,000.
- Actual match received: months one through ten, your monthly deferral exceeds 6% of monthly pay, so the employer matches the full 6% each period. That’s $500 a month for ten months, or $5,000. In November and December your deferrals are zero, so the match is zero.
- True-up: $6,000 minus $5,000 = $1,000.
Without the provision, you’d permanently lose that $1,000 in employer money despite deferring enough over the year to earn the full match. The earlier you hit the limit, the wider the gap.
One caveat on the compensation figure: not all pay counts. Plans can exclude overtime, bonuses, commissions, severance, fringe benefits, expense reimbursements, and deferred compensation from the matching formula. Your plan’s adoption agreement lists exactly what’s in and what’s out, and those exclusions directly shape the maximum potential match your true-up is measured against.
A Second Trigger: The Annual Compensation Cap
High earners can hit a different ceiling. Under Internal Revenue Code Section 401(a)(17), a plan cannot count more than $360,000 of an employee’s pay in 2026 when calculating benefits or contributions.3Internal Revenue Service. 2026 Amounts Relating to Retirement Plans and IRAs, as Adjusted4eCFR. 26 CFR 1.401(a)(17)-1 – Limitation on Annual Compensation
If you earn $400,000, a per-pay-period system may match against roughly $33,333 of monthly pay. Once your year-to-date pay hits $360,000, the plan must stop counting further compensation for match purposes. Your deferrals may continue, but the match stops because there’s no eligible compensation left in the formula. A year-end reconciliation recalculates using $360,000 as full-year eligible compensation and fills the gap.
Catch-Up Contributions Usually Aren’t Matched
If you’re 50 or older, you can defer above the standard limit. For 2026, the catch-up amount is $8,000 for most participants, taking the total to $32,500. A higher catch-up of $11,250 applies if you’re between 60 and 63 under a SECURE 2.0 change, bringing the total to $35,750.1Internal Revenue Service. 401(k) Limit Increases to $24,500 for 2026, IRA Limit Increases to $7,500
Most plan documents do not match on catch-up contributions. The formula typically applies only to regular elective deferrals up to a stated percentage of pay; catch-ups sit in a separate bucket. That makes the lost-match problem worse for catch-up-eligible workers who front-load, since the regular deferral ceiling arrives even sooner. Check your Summary Plan Description to see whether catch-up deferrals count under your formula.
How to Tell Whether Your Plan Has a True-Up
A true-up is not required by law. It’s an optional provision that has to be written into the plan document. If the language isn’t there, the employer generally has no obligation and no authority to make the contribution.
Start with your Summary Plan Description, which HR or the plan administrator can send you. Look for language about the employer reconciling matching contributions on an annual basis, or explicit references to a “true-up” or “annual match calculation.” If the SPD says matching is calculated each payroll period with no mention of a year-end reconciliation, the plan probably doesn’t include one. Ask the plan administrator directly if it’s unclear.
Safe harbor 401(k) plans are a distinct case. Under IRS guidance, safe harbor matching can be calculated on a payroll-period basis without a year-end true-up. Because the safe harbor design automatically satisfies nondiscrimination testing, the pressure to reconcile annually is lower, and the absence of a true-up in a safe harbor plan may be deliberate and fully compliant.
Conditions That Can Cost You the True-Up
Two provisions catch people off guard.
First, many plans include a last-day rule requiring you to be actively employed on the final day of the plan year to receive the true-up allocation. Quit or get laid off in September after front-loading, and you can forfeit the whole thing. Some plans carve out exceptions for retirement, death, or disability, but that’s plan-by-plan, not a legal guarantee. This is the reason front-loading can backfire if you’re weighing a mid-year job change.
Second, true-up money is employer matching money, so it follows the same vesting schedule as your regular match.5Internal Revenue Service. 401(k) Plan Overview Under a graded schedule, you don’t own 100% of the true-up until the schedule says you do. Your own deferrals are always fully vested; the employer’s share isn’t.
When the Deposit Arrives
True-ups land after the plan year closes, because the calculation needs final compensation and deferral figures. The deadline for depositing matching contributions, true-ups included, is generally the employer’s tax filing deadline with extensions.6Internal Revenue Service. Issue Snapshot – Deductibility of Employer Contributions to a 401(k) Plan Made After the End of the Tax Year For a calendar-year corporate filer taking the full six-month extension, that can push as late as October 15 of the following year. In practice most employers deposit true-ups within the first quarter after year-end.
If Your Employer Skips a Required True-Up
If the plan document requires a true-up and the employer doesn’t make the contribution, that’s a plan operational error. The IRS runs a correction framework called the Employee Plans Compliance Resolution System, which includes a Self-Correction Program for certain failures and a Voluntary Correction Program for larger ones.7Internal Revenue Service. Voluntary Correction Program (VCP) – General Description
The standard correction is a deposit of the missed contribution plus lost earnings from the date it should have been made through the date the corrective deposit hits the account. The goal is to put you where you would have been if the error hadn’t happened. If you have reason to think a true-up was owed and never appeared, raise it with your plan administrator in writing and ask them to walk through the calculation.