General liability insurance for a contractor covers third-party bodily injury, property damage, and personal and advertising injury that arise out of the contractor’s business operations, and it pays the lawyer, the court costs, and the settlement when someone sues. It is written on the industry’s standard CGL form, and it responds whether the injured party is a client, a passerby, a tenant, or a neighboring business. What it does not do is pay for injuries to the contractor’s own employees, damage to the contractor’s own tools, the cost of redoing defective work, vehicle accidents, pollution events, or professional design errors. Those risks sit with other policies.
The Three Coverages Inside the Policy
A standard CGL policy is built on three coverage parts, labeled A, B, and C on the ISO CG 00 01 form that most carriers use as the template.1TotalCSR. CG 00 01 Coverage Form History, Versions, and Key Changes
Bodily Injury and Property Damage
Coverage A is the heart of the policy. It responds when a third party is physically hurt or their property is damaged because of the contractor’s work. A delivery driver trips over an unsecured power cord on the site. A homeowner steps on an exposed nail during a kitchen remodel. A neighbor’s parked car is crushed by falling scaffolding. In each case the insurer pays medical bills, lost wages, repair or replacement costs, and legal defense fees.2ConstructionCoverage.com. General Liability Coverage
Property damage coverage reaches “loss of use” as well. If a contractor ruptures a gas line and the business next door has to shut down while repairs are made, the policy can compensate for that lost revenue.2ConstructionCoverage.com. General Liability Coverage One important line to keep straight: Coverage A pays for damage the contractor causes to someone else’s property, but not for the work the contractor was hired to perform. A plumber who drops a wrench and shatters a client’s custom floor tiles gets the floor covered; the plumbing itself is not.
Personal and Advertising Injury
Coverage B deals with non-physical offenses committed in the course of business. For a contracting company that means libel, slander, copyright infringement (unauthorized use of architectural renderings or project photos in marketing, for example), invasion of privacy, false arrest, wrongful eviction, and malicious prosecution.2ConstructionCoverage.com. General Liability Coverage3IRMI. Advertising Injury Definition It does not apply to performance disputes, pricing errors, or claims where the insured knowingly published false material.4Higginbotham. Why Your Business Needs Personal and Advertising Injury Coverage
Medical Payments
Coverage C pays for minor third-party injuries without any finding of fault. Someone twists an ankle on the job site; the policy picks up the ambulance ride and the emergency room visit. Typical per-person limits run from $1,000 to $5,000.5EB Actuary. General Liability Insurance The practical use is simple: a quick payment can close out a small incident before it turns into a lawsuit. Coverage C does not include legal defense.6Insurance Information Institute. Commercial General Liability Insurance
Coverage After the Job Is Finished
Contractor liability does not stop when the crew drives away. Products-completed operations coverage picks up after the project is handed over. An HVAC contractor installs a ceiling-mounted AC unit; six months later the mounting fails, a tenant is injured, and furniture is crushed. The CGL policy covers the medical bills and the property damage. A deck railing fails two years after installation and a guest is hurt; the policy responds there too.2ConstructionCoverage.com. General Liability Coverage
Work is treated as “complete” at the earliest of three points: all contractual work is finished, all work at the job site is finished, or the finished portion is put to its intended use.7IRMI. The Hazards of Products and Completed Operations Returning to the site for service or maintenance does not reset that status.
The nuance that trips contractors up: completed operations pays for bodily injury or property damage caused by defective work, but not for the cost to repair the defective work itself. The line between what broke because of the defect and the defect itself matters a great deal in a claim.8The Hartford. Products-Completed Operations Contracts often require subcontractors to carry completed operations coverage for one to five years after a project ends and to add the general contractor and owner as additional insureds during that window.9Johnson Financial Group. Completed Operations Liability Considerations in the Construction Sector
Legal Defense Is Included
One of the most valuable things a CGL policy does is defend the contractor when a lawsuit is filed over a covered claim. The insurer assigns an attorney and pays court costs, expert witness fees, and investigation expenses. Those defense costs are typically paid in addition to the policy limits, not subtracted from them.10GetTIA. What Does General Liability Insurance Cover The duty to defend applies even when a suit turns out to be groundless, as long as the allegations fall within the policy’s scope.2ConstructionCoverage.com. General Liability Coverage For a contractor facing a nuisance suit that would still cost tens of thousands to answer, this is often the single most expensive line item the policy absorbs.
What a General Liability Policy Will Not Pay For
The exclusions matter as much as the coverages. A standard CGL policy leaves out a long list of risks that other policies are built for.
- Employee injuries. Work-related injuries to the contractor’s own employees belong to workers’ compensation, not general liability. Illinois law, for example, states plainly that general liability insurance “will not cover workers’ compensation liability.”11Illinois Workers’ Compensation Commission. Insurance
- Faulty workmanship. The policy will not pay to tear out and redo the contractor’s own defective work. If a roofer installs shingles incorrectly, the reinstallation is excluded. But if the faulty roof then lets water into the building and ruins the interior, that resulting damage is typically covered.12Amwins. CGL Exclusions Common to Construction Related Claims
- The contractor’s own property. Tools, equipment, and business property damaged on a job site are not covered under a CGL policy.2ConstructionCoverage.com. General Liability Coverage
- Property in the contractor’s care, custody, or control. If a contractor is holding a client’s equipment and damages it, the standard policy generally excludes the claim.12Amwins. CGL Exclusions Common to Construction Related Claims
- Vehicle liability. Accidents involving owned, leased, or borrowed vehicles need a commercial auto policy.13Fit Small Business. Common General Liability Exclusions
- Pollution. Claims from the release of pollutants are excluded whether the release is sudden or gradual.13Fit Small Business. Common General Liability Exclusions
- Professional errors. Design mistakes, negligent advice, and specification errors fall outside CGL. Most policies include a professional services exclusion, so if a failure traces back to a design decision rather than physical labor, the carrier may deny the claim.14ConstructionCoverage.com. General Liability vs Professional Liability
- Intentional acts. Damage or injury from deliberate conduct is excluded.13Fit Small Business. Common General Liability Exclusions
- Electronic data. Lost, corrupted, or inaccessible data is not treated as tangible property under the standard form.13Fit Small Business. Common General Liability Exclusions
The Subcontractor Carve-Out
There is one important exception inside the “damage to your work” exclusion. If the defective work was performed by a subcontractor rather than the general contractor’s own crew, coverage for the resulting damage is often restored. Most courts enforce this exception, allowing CGL policies to respond when a subcontractor’s defective work damages the broader project.12Amwins. CGL Exclusions Common to Construction Related Claims Some carriers strip that exception back out with an endorsement, so the policy language is worth reading before relying on it.
How the Dollar Limits Work
A CGL policy carries six limits, and none of them increase no matter how many insureds, claims, or lawsuits are involved.15IRMI. How the Limits Apply in the CGL Policy
- Each occurrence limit. The maximum paid for all damages and medical expenses from a single incident.
- General aggregate limit. The maximum paid during the policy period for all claims under Coverages A, B, and C combined, excluding products-completed operations claims.
- Products-completed operations aggregate. A separate pool for claims arising from finished work. Claims paid under this limit do not reduce the general aggregate.16Tonry Insurance. Per Project Aggregate
- Personal and advertising injury limit. A per-person or per-organization cap for Coverage B, subject to the general aggregate.
- Damage to rented premises limit. A sublimit for fire damage or short-term rental property damage.
- Medical expense limit. A per-person sublimit for Coverage C.
The commercial baseline is $1 million per occurrence and $2 million general aggregate. About 97% of contractors buy those limits, according to Insureon data.17Insureon. Construction Contracting Business Insurance Cost Large-scale and public projects often require $5 million or more, typically achieved by layering an umbrella policy on top of the primary CGL.18ConstructionCoverage.com. General Liability Requirements
A contractor running several jobs at once should look at a per-project aggregate endorsement (ISO form CG 25 03). Without it, one large claim on one project can exhaust the aggregate limit and leave every other active job uncovered. With it, each designated project gets its own full aggregate.16Tonry Insurance. Per Project Aggregate
Occurrence vs. Claims-Made
Standard CGL policies for contractors are written on an occurrence basis.19Insurance Training Center. Occurrence vs Claims-Made Policies Explained The policy covers incidents that happen during the policy period regardless of when the claim is filed. A contractor who installs a staircase in 2025 and gets sued over a related injury in 2028 is covered as long as the occurrence-based policy was in force in 2025.
Claims-made policies, by contrast, only cover claims filed while the policy is active, and they are more common on professional liability. For construction work, where defects can surface years after a project wraps up, the occurrence form gives contractors a much longer tail of protection.20Insureon. Occurrence vs Claims-Made Business Insurance
Other Policies That Cover the Gaps
General liability is foundational, not comprehensive. The exclusions above correspond directly to other policies contractors generally need.
- Workers’ compensation. Mandatory in most states once a contractor has employees. Covers medical care, lost wages, and disability for work-related injuries.21Travelers. General Liability vs Workers Compensation
- Commercial auto. Required for liability arising from vehicles used in the business.21Travelers. General Liability vs Workers Compensation
- Contractors professional liability. Covers design errors, negligent advice, scheduling mistakes, and specification failures. Especially relevant for design-build contractors who carry single-point responsibility for both design and construction, and it fills the professional services gap in the CGL.14ConstructionCoverage.com. General Liability vs Professional Liability
- Builders risk. Protects the structure under construction, along with materials and equipment at the site, against perils like fire, theft, and vandalism. Coverage ends when the project is complete.22The Hartford. Builders Risk vs General Liability
- Inland marine. A floater policy that protects the contractor’s own tools and equipment in transit or stored at job sites against theft, damage, and vandalism.23Procore. Inland Marine Insurance
- Pollution liability. Covers environmental damage and cleanup costs for contamination events the standard CGL pollution exclusion rejects.22The Hartford. Builders Risk vs General Liability
- Umbrella or excess liability. Extends limits above the primary CGL, auto, and employers’ liability. Often the most cost-effective way to reach the $5 million-plus limits that large commercial and public projects require.24RelayFi. General Liability Insurance for Contractors
When a general contractor asks a subcontractor to add it as an additional insured, the paperwork that actually confers protection is the endorsement attached to the subcontractor’s policy, not the certificate of insurance. The certificate is informational only. A GC that needs the coverage should ask to see the endorsement itself and confirm it matches what the contract requires.25Sands Anderson. Additional Insured Status: What Every Contractor and Government Contractor Needs to Know