What Does Certified Payroll Mean for Contractors?

Certified payroll for contractors is a signed weekly report that proves every laborer and mechanic on a federally funded construction project was paid at least the prevailing wage for their trade, and it must be filed by the prime contractor and every tier of subcontractor from the first week of on-site work until the job is complete. The obligation attaches to federal construction contracts over $2,000 and to any project built with federal grants, loans, or loan guarantees that incorporate Davis-Bacon labor standards through what the U.S. Department of Labor calls “Related Acts.”1U.S. Department of Labor. Fact Sheet 66: The Davis-Bacon and Related Acts Getting it wrong can cost back wages, the contract itself, and a three-year ban from all federal work.

Who Has to File

Every prime contractor and every subcontractor performing work on a covered project must submit certified payroll. There is no size threshold for the reporting once the contract passes the $2,000 coverage trigger. A one-person electrical sub filing for themselves alone carries the same obligation as a general contractor with 200 workers on site.

The reports cover all laborers and mechanics working at the job site, including tradespeople, equipment operators, and site guards. The prime contractor is ultimately responsible for making sure every subcontractor’s reports come in, which is why most generals write payroll submission deadlines directly into their subcontract agreements. If a sub goes silent, the prime feels it first.

Filing Frequency and Recordkeeping

Reports are filed weekly, covering the preceding payroll period, and submission must be continuous from the first week any work begins on site until the project ends.2eCFR. 29 CFR 3.3 – Certified Payrolls Missing a week is not something you can quietly catch up on. Contracting agencies track submission gaps, and a pattern of late filings can trigger an investigation even when the underlying wages were correct.

All payroll records, both the certified submissions and the underlying regular payroll records, must be preserved for at least three years after all work on the prime contract is completed.3eCFR. 29 CFR 5.5 – Contract Provisions and Related Matters The clock runs from completion of the entire prime contract, not from when your particular subcontract wraps up. On multi-year projects that means holding records for a long time. Electronic storage is acceptable, which makes organizing files by project the most practical approach.

What Goes on the Report

The standard form is WH-347, “Payroll (For Contractors).” Using this exact form is optional, but whatever format you use must contain the same information.4U.S. Department of Labor. Instructions for Completing Davis-Bacon and Related Acts Weekly Certified Payroll Form, WH-347 For each worker on site during the reporting period, the report needs:

  • Name and an individual identifier, typically the last four digits of the Social Security number. Full Social Security numbers must not be included.
  • Work classification matching a trade listed in the contract’s wage determination (for example, “Carpenter” or “Electrician”).
  • Hours worked, broken out by day, with straight time and overtime separated.
  • Rate of pay, showing the hourly cash rate and the fringe benefit rate separately so an auditor can confirm the combined total meets or exceeds the prevailing wage.
  • Gross wages before deductions.
  • Every deduction itemized, including federal and state taxes, FICA, and any voluntary withholdings the worker authorized.
  • Net pay actually received.

The level of detail matters because an auditor works the chain from the wage determination rate through the hourly breakdown, across the hours worked, to gross pay, and then verifies the deductions. Any break in that chain draws a phone call.

The Statement of Compliance

Each weekly payroll must be accompanied by a signed Statement of Compliance, which appears on the second page of Form WH-347.2eCFR. 29 CFR 3.3 – Certified Payrolls This is the “certified” part. The signer attests that the payroll data is accurate, that every worker was paid at least the prevailing wage, and that no one was pressured to return any portion of their pay.

The signature has to come from someone with actual knowledge of the payroll facts, whether that is a company officer, the payroll manager, or another authorized employee who supervises wage payments. It can be handwritten or a legally valid electronic signature.2eCFR. 29 CFR 3.3 – Certified Payrolls

Do not treat this signature as a formality. Knowingly submitting false information on a certified payroll report is a federal crime under 18 U.S.C. ยง 1001, carrying penalties of up to five years in prison.5Office of the Law Revision Counsel. 18 USC 1001 – Statements or Entries Generally Even where a misstatement was unintentional, the contractor remains liable for any resulting wage underpayments.

Prevailing Wages, Fringes, and Classifications

The prevailing wage is not a single number. It is a basic hourly cash rate plus a separate fringe benefit rate, both specific to the worker’s trade and the geographic area of the project. The DOL publishes these rates in a wage determination that gets incorporated into the contract before bidding, so every bidder is pricing against the same numbers.

The fringe portion gives contractors some flexibility. You can satisfy it through contributions to bona fide benefit plans such as health insurance or retirement accounts, by paying the fringe amount directly to the worker as additional cash, or through some combination. Whichever approach you take, the certified payroll must show the math clearly enough for an auditor to confirm the total compensation meets or exceeds the wage determination rate.4U.S. Department of Labor. Instructions for Completing Davis-Bacon and Related Acts Weekly Certified Payroll Form, WH-347

Getting Classifications Right

Every worker must be assigned a classification that matches a trade on the wage determination. When a worker performs duties spanning two classifications, they must be paid the higher rate for the hours spent on the higher-paid work. Misclassification is the compliance failure that costs contractors the most money. If the DOL believes workers were misclassified, it can assume every worker in that trade spent all their time on the higher-paying tasks unless the contractor’s own records prove otherwise.

When a Trade Is Not on the Wage Determination

Sometimes a project calls for work that does not appear in the original wage determination. You cannot invent a classification and pick a rate. Instead, submit Standard Form 1444, “Request for Authorization of Additional Classification and Rate,” to the contracting officer.6U.S. General Services Administration. Request For Authorization Of Additional Classification And Rate (Standard Form 1444) The request describes the proposed classification, the duties, and the proposed wage and fringe rates. If everyone agrees, the contracting officer recommends approval to the DOL’s Wage and Hour Division. If they cannot agree, the Wage and Hour Division decides. Waiting for approval before putting workers under an unapproved rate is the safe move; paying first creates back-wage exposure if the DOL later sets a higher rate.

Apprentices

Apprentices can be paid below the full prevailing wage rate, but only under strict conditions. The apprentice must be individually registered in a program approved by the DOL’s Office of Apprenticeship or a recognized State Apprenticeship Agency.7U.S. Department of Labor. Davis-Bacon Compliance Principles A worker in their first 90 days of probationary employment can also qualify if the appropriate agency has certified their eligibility. Without proper registration, a worker labeled “apprentice” must be paid the full journeyworker rate.

There is also a ratio cap on apprentices to journeyworkers. The allowable ratio comes from the apprentice’s registered program or the ratio applicable to the project’s locality, whichever is lower, and compliance is measured daily rather than weekly.7U.S. Department of Labor. Davis-Bacon Compliance Principles If you exceed the ratio on a given day, every apprentice beyond the allowed number must be paid the full prevailing wage for that day. Contractors working outside the area where their apprenticeship program is registered must follow the ratios and wage rates of the local program, not their home program.

Posting at the Job Site

Contractors must post the applicable wage determination and the Davis-Bacon poster (WH-1321) in a prominent, accessible location at the job site where workers can easily see them.1U.S. Department of Labor. Fact Sheet 66: The Davis-Bacon and Related Acts Workers are supposed to be able to compare their paychecks against the published rates. Skipping the posting is a violation on its own.

What Happens If You Get It Wrong

Enforcement has real teeth, and consequences scale with severity and intent.

  • Back wages. The contracting agency can withhold funds from the contractor’s payments to cover prevailing wage shortfalls. The prime is liable for the wage deficiencies of its subcontractors, not just its own employees.
  • Overtime liquidated damages. Violating the 40-hour overtime requirement under the Contract Work Hours and Safety Standards Act triggers liquidated damages of $33 per affected worker for each calendar day of violation. Those daily penalties add up quickly on a job with dozens of workers over several weeks.8U.S. Department of Labor. Civil Money Penalty Inflation Adjustments
  • Contract termination. The government can terminate for cause when a contractor fails to meet Davis-Bacon requirements, leaving the contractor on the hook for any additional costs the government incurs to finish the work.1U.S. Department of Labor. Fact Sheet 66: The Davis-Bacon and Related Acts
  • Debarment. For willful or repeated violations, the contractor, its responsible officers, and any affiliated companies face debarment from all federal and federally assisted contracts for three years. Debarred names are published on SAM.gov.9eCFR. 29 CFR Part 5 – Section 5.12 Debarment Proceedings
  • Criminal prosecution. Falsifying certified payroll reports can result in up to five years of imprisonment under federal false-statement laws.5Office of the Law Revision Counsel. 18 USC 1001 – Statements or Entries Generally

The withholding mechanism is particularly effective because the money never reaches the contractor. Once the contracting agency identifies a potential violation, it holds back enough from progress payments to cover the estimated underpayment. Contractors often discover the problem when an expected draw comes up short.

Recent Rule Changes to Reconcile

The DOL finalized a major update to its Davis-Bacon regulations that took effect in late 2023 and into 2024.10Federal Register. Updating the Davis-Bacon and Related Acts Regulations The most significant change is an expanded definition of “site of the work.” The revised rules more clearly cover secondary sites where significant portions of a building or structure are constructed, even if that work happens off the primary job site. Contractors who fabricate major components at a separate facility may now need to pay prevailing wages for that work and report it on certified payroll.

The updated rules also formally clarify that electronic signatures and electronic submission of certified payroll are acceptable. Recordkeeping requirements now include maintaining worker phone numbers and email addresses alongside traditional payroll data. The rule also distinguishes more explicitly between the regular payroll records contractors must keep internally and the certified payroll documents they submit to the contracting agency each week. Compliance systems built before 2024 are worth a second look, because the expanded site-of-work definition alone can pull workers into prevailing wage coverage who were previously outside it.