M1 and M2 are the two money supply measures the Federal Reserve publishes to track how much money is circulating in the U.S. economy. M1 counts the most spendable money: physical currency, checking balances, and savings deposits. M2 includes everything in M1 and adds small certificates of deposit and retail money market mutual funds. As of January 2026, M1 totaled roughly $19.2 trillion and M2 stood at about $22.4 trillion. Every dollar in M1 is also in M2, so the roughly $3.2 trillion gap is money Americans have parked in accounts that pay interest but take a little longer to spend.
What M1 Counts
M1 is the narrow measure. It covers money you can use right now, with no waiting period, no conversion step, and no penalty for pulling it out. Three categories make up the total.
Physical currency is the most intuitive piece: Federal Reserve notes and coins circulating outside bank vaults, the U.S. Treasury, and Federal Reserve Banks. Cash in your wallet or a register counts.
Demand deposits are balances in checking accounts at commercial banks. The defining feature is that you can withdraw or transfer the money at any time without advance notice. The Fed excludes amounts held by other banks, the federal government, and foreign official institutions when calculating this component.
Other liquid deposits is the broadest piece of M1 and the one most affected by recent rule changes. It combines two types of accounts: other checkable deposits, which include NOW accounts, automatic transfer service accounts, credit union share drafts, and checking accounts at thrift institutions; and savings deposits, which include money market deposit accounts. All of these sit inside M1 today because of a 2020 regulatory change discussed below.
What M2 Adds
M2 starts with everything in M1 and layers on two categories of assets that are slightly harder to spend.
Small-denomination time deposits are certificates of deposit with balances under $100,000. You commit to leaving your money in the bank for a set period, from a few months to several years, in exchange for a higher interest rate. Pulling the funds out early usually triggers a penalty, which is why CDs sit in the broader measure rather than M1.
Retail money market mutual funds pool individual investors’ deposits and invest them in short-term debt like government bonds. Because they’re held by everyday savers rather than institutional investors, they fall within M2’s scope. These funds are liquid enough that you can usually redeem shares within a day or two, but they aren’t as instantly spendable as a checking balance.
The roughly $3.2 trillion difference between M2 and M1 as of January 2026 reflects the combined value of these small time deposits and retail money market fund shares.
How M1 and M2 Differ
The simplest way to think about it: M1 measures money people are actively using, and M2 adds money people are also saving. M1 is a complete subset of M2, so every dollar in M1 also appears in M2. The reverse isn’t true — a five-year CD sits in M2 but not M1.
- Liquidity. M1 assets can be spent immediately. M2-only assets require a waiting period, a redemption process, or an early-withdrawal penalty.
- Interest. Most M2-only assets exist precisely because they pay higher interest in exchange for reduced access.
- Size. M2 always exceeds M1. The gap shows how much near-money the public is holding in time deposits and retail money market funds.
- Signal. When M1 grows faster than M2, consumers are moving money into spendable accounts, which often points to rising confidence or spending. When M2 grows faster, people are saving more, which can indicate caution.
Tracking the ratio between the two over time reveals shifts in consumer behavior that a single number can’t capture. A shrinking gap might mean households are cashing out CDs to cover expenses. A widening gap might mean they’re locking money away because interest rates on time deposits have become attractive.
Why M1 Jumped in 2020
If you pull up a long-run chart of M1, you’ll see a near-vertical line in the spring of 2020. That spike is a reclassification, not a sudden flood of new money.
Before May 2020, savings accounts were part of M2 but not M1. The reason was a decades-old rule under the Federal Reserve’s Regulation D that limited savings accounts to six “convenient” transfers per month. That cap made savings accounts meaningfully less liquid than checking accounts, so the Fed treated them differently.
Two things changed in quick succession. In March 2020, the Fed reduced reserve requirement ratios to zero percent for all depository institutions to pump liquidity into the economy during the early pandemic. With reserve requirements gone, there was no regulatory reason to distinguish between transaction accounts and savings deposits. The following month, the Fed issued an interim final rule deleting the six-transfer limit from Regulation D.
Once savings deposits could be accessed as freely as checking accounts, the Fed moved them into M1 effective May 2020 and created the “other liquid deposits” line to hold both savings deposits and other checkable deposits. M1 roughly quadrupled overnight on paper. M2 was unaffected because savings deposits had always been inside it. The Fed has said it does not plan to reimpose the six-transfer limit, though it reserves the right to adjust savings account definitions in the future.
Where the Numbers Come From
The Federal Reserve publishes money supply data in its H.6 statistical release, “Money Stock Measures.” It comes out on the fourth Tuesday of every month, generally at 1:00 p.m. Eastern. If that Tuesday is a federal holiday, publication shifts to the next business day. Financial institutions report their deposit data to the Fed, which aggregates and adjusts the figures before release.
The H.6 release includes seasonally adjusted and non-seasonally adjusted figures for both M1 and M2, broken down by component. The Federal Reserve Bank of St. Louis also maintains a free public database called FRED, where anyone can pull historical M1 and M2 data back to 1959, download charts, customize date ranges, and access vintage data through its ALFRED archive.
What Money Supply Says About Inflation
The textbook link between money supply and prices is the equation of exchange, M × V = P × Q. M is the money supply, V is velocity (how fast each dollar changes hands), P is the price level, and Q is the quantity of goods and services produced. If velocity and output hold steady, an increase in the money supply pushes prices higher. More dollars chasing the same amount of stuff means each dollar buys less.
Reality is messier. Velocity isn’t constant, and output fluctuates. The 2020-through-2023 stretch is a useful case. M2 grew at an extraordinary pace in 2020 and 2021 as pandemic-era fiscal stimulus and Fed asset purchases flooded the system. Inflation didn’t spike immediately because velocity plunged and much of the money landed in savings. As the economy reopened, spending picked up, supply chains strained, and consumer prices surged through 2022. The money supply expansion wasn’t the only cause, but it was fuel.
By 2023 and into 2024, M2 actually contracted year-over-year for the first time in decades as the Fed raised rates aggressively. That tightening, combined with reduced fiscal stimulus, helped pull inflation back down. As of the fourth quarter of 2025, M2 velocity stood at 1.41, meaning each dollar in M2 was used to purchase domestically produced goods and services about 1.4 times per quarter. The takeaway is that money supply data is most useful as a leading indicator when paired with velocity and output, not as a standalone predictor.