The Uniform Appraisal Dataset requirements standardize how residential appraisals are completed and submitted for loans sold to Fannie Mae and Freddie Mac, replacing free-form descriptions with defined ratings, abbreviations, and formatting rules so every report feeds the agencies’ automated systems the same way.1Federal Housing Finance Agency. Fannie Mae and Freddie Mac Launch Joint Effort to Improve Loan and Appraisal Data Collection The current rules (UAD 2.6) remain in force through late 2026, when a redesigned data-driven format (UAD 3.6) becomes mandatory on November 2, 2026.2Freddie Mac. UAD Redesign Timeline
Which Appraisals the UAD Covers
Under the framework in use during the transition, four appraisal forms carry UAD requirements. The most common is the Uniform Residential Appraisal Report (Fannie Mae Form 1004 / Freddie Mac Form 70) for standard single-family properties. Individual condominium units use Form 1073 (Fannie Mae) or Form 465 (Freddie Mac). For exterior-only inspections, the corresponding forms are 2055 for residential and 1075 (Fannie Mae) / 466 (Freddie Mac) for condominiums.3Freddie Mac. Uniform Appraisal Dataset Specification
FHA-insured loans also require UAD compliance but with a narrower scope. FHA adopted the UAD versions of Form 1004 and Form 1073 and does not accept the exterior-only forms (2055 and 1075) at all.4U.S. Department of Housing and Urban Development. Mortgagee Letter 2011-30 – Uniform Appraisal Dataset If a property could be financed either conventionally or through FHA, the exterior-only option is off the table.
Once the UAD 3.6 mandate takes effect, these separate form numbers disappear. A single redesigned Uniform Residential Appraisal Report adapts its fields to the property type and scope of work.5Fannie Mae. Uniform Appraisal Dataset New data points include property valuation method type, project legal structure type, and construction methods.6Fannie Mae. EarlyCheck and UAD 3.6 Changes Integration Impact Memo
Condition Ratings C1 Through C6
The UAD replaced subjective language like “good condition” with a six-tier numeric scale reflecting the current physical state of the structure, including deferred maintenance and the remaining useful life of major components.
- C1. Brand-new construction that has never been occupied. Every component is new, with zero physical depreciation.
- C2. No deferred maintenance and virtually no depreciation. Either nearly new or recently gut-renovated to a condition comparable to new construction.
- C3. Well maintained with limited wear. Some components may have been updated, but not every major system. Effective age is less than actual age.
- C4. Minor deferred maintenance and normal wear. Adequately maintained, needing only minimal or cosmetic repairs. Short-lived components are functional but approaching the end of their expected life.
- C5. Obvious deferred maintenance and physical deterioration. The property needs significant repairs or rehabilitation to major systems and shows clear neglect relative to its age.
- C6. Substantial damage or deterioration affecting livability and structural soundness. Major repairs are needed for habitability.
The line between C4 and C5 is where the real stakes lie for lending decisions. A C4 property is fundamentally sound with minor issues; a C5 rating signals that the lender may require repairs before closing.7Fannie Mae. Property Condition and Quality of Construction of the Improvements
Quality Ratings Q1 Through Q6
Quality describes the caliber of materials, workmanship, and design rather than physical state.
- Q1. Individually architect-designed with exceptionally high-grade materials and workmanship throughout. Unique, one-of-a-kind structures.
- Q2. Custom-designed or built from heavily modified plans, with high-quality exterior and interior detail. Also found in top-tier tract developments.
- Q3. Above-standard construction from individual or designer plans, with upgraded materials and finishes beyond builder-grade stock.
- Q4. Meets or exceeds building code with standard or modified building plans. Materials and finishes are builder-grade, possibly with some upgrades. Most production housing falls here.
- Q5. Economy construction prioritizing basic functionality. Minimal exterior detail, basic finishes, and inexpensive stock materials.
- Q6. Basic quality and lower cost. Some homes at this tier may not be suitable for year-round occupancy, often built without formal plans using the lowest-quality materials available.
Most residential appraisals land in the Q3 or Q4 range. Appraisers sometimes default to Q4 without careful analysis, which can hurt comparability when the subject property genuinely reflects above-standard construction.7Fannie Mae. Property Condition and Quality of Construction of the Improvements
Formatting, Codes, and Address Standards
Small formatting errors create disproportionate problems because they trigger automated validation flags. Property addresses must conform to United States Postal Service Publication 28 standards for complete addresses.3Freddie Mac. Uniform Appraisal Dataset Specification A non-standard address format is one of the most common reasons for a flagged submission.
Bathroom counts use a decimal format where the digit left of the period represents full baths and the digit to the right represents half baths. A home with three full baths and two half baths is entered as 3.2, not “3 full / 2 half.”3Freddie Mac. Uniform Appraisal Dataset Specification Every date field follows mm/dd/yyyy, whether it is the effective date of the appraisal, a prior sale, or the expiration date of the report.
Site location and view are captured through fixed abbreviation codes, not prose. Common location codes include Res (residential), Comm (commercial influence), BsyRd (busy road), AdjPrk (adjacent to park), AdjPwr (adjacent to power lines), Ind (industrial), and Lndfl (landfill). View codes include Wtr (water), Mtn (mountain), Pstrl (pastoral), Woods, CtyStr (city street), and CtySky (city skyline).3Freddie Mac. Uniform Appraisal Dataset Specification Each factor also carries an overall rating of N (neutral), B (beneficial), or A (adverse). Inventing an abbreviation, or using one from a prior version, is a reliable way to get flagged.
Submission and Validation
Completed appraisals are submitted electronically through the Uniform Collateral Data Portal (UCDP), the shared gateway for both Fannie Mae and Freddie Mac. The portal is used by lenders and their designated agents, including appraisal management companies and authorized platform vendors. Independent fee appraisers cannot register as lender agents and do not have direct submission access.8Freddie Mac. UCDP Lender Agent Admin User Guide
Every successful upload generates a Submission Summary Report (SSR), which consolidates validation results from both GSEs. Findings fall into three categories: system findings (file structure problems), UAD compliance findings (data format and completeness), and GSE proprietary findings (each enterprise’s own requirements).9Freddie Mac. Submission Summary Report Guide for UAD 3.6
Under UAD 3.6, each finding carries a severity level that drives the response:
- Fatal. The submission receives a “Not Successful” status. The only remedy is to correct the data and resubmit.
- Severe. Does not block the submission, but affects eligibility for representations and warranties relief on property value.
- Warning. Should be reviewed, but does not affect submission status.
- Informational or Notification. For awareness only.
A loan delivered to either GSE must have received a “Successful” status in the UCDP before delivery.9Freddie Mac. Submission Summary Report Guide for UAD 3.6
The November 2026 Redesign
The legacy UAD (version 2.6) relied on fixed appraisal forms with predetermined fields. The redesigned UAD (version 3.6) replaces that structure with a single dynamic appraisal report built on the MISMO version 3.6 data standard. Instead of choosing a form number by property type, the new report adapts its fields to the property’s characteristics.6Fannie Mae. EarlyCheck and UAD 3.6 Changes Integration Impact Memo The familiar form numbers (1004, 1073, 2055, 1075) collapse into a single Uniform Residential Appraisal Report.
Three dates define the transition:
- January 26, 2026. Broad production opens. Any lender can begin submitting UAD 3.6 reports to the UCDP without prior GSE approval.5Fannie Mae. Uniform Appraisal Dataset
- November 2, 2026. UAD 3.6 is mandatory for all new appraisal submissions on loans sold to Fannie Mae or Freddie Mac. Legacy UAD 2.6 submissions made after this date receive a fatal error and are rejected.2Freddie Mac. UAD Redesign Timeline
- May 3, 2027. Revisions to UAD 2.6 appraisals submitted before the mandate are allowed until this date, after which the legacy pipeline closes.2Freddie Mac. UAD Redesign Timeline
If you are a lender, appraiser, or appraisal management company that has not tested UAD 3.6 submissions, the broad production window is the time to start. Waiting until November leaves no margin for software issues or workflow adjustments.