A surety bond letter sample gives you the format a surety company uses to confirm, in writing, that a bond exists: it names the principal and obligee, states the bond number and penal sum, sets the effective dates, and carries an authorized signature and corporate seal. Obligees — licensing boards, government agencies, project owners, and courts — rely on that letter as proof the bond is in force. The template below shows the standard form, followed by what you need to gather before requesting one, what makes the letter legally valid, and how to fix mistakes after issuance.
Sample Surety Bond Letter
The following covers the elements most obligees expect. Swap “Project” for “License Number” or “Case Number” depending on your bond type.
[Surety Company Name]
[Surety Company Address]
[Date]
[Obligee Name]
[Obligee Address]
Re: Bond Number: [Bond Number]
Principal: [Principal Name]
Project/License/Case: [Title or Number]
Penal Sum: [Bond Amount]
To Whom It May Concern,
This letter confirms that [Surety Company Name] has issued a surety bond on behalf of [Principal Name] in favor of [Obligee Name]. The bond is identified by number [Bond Number] and carries a penal sum of [Bond Amount]. The bond is effective from [Start Date] through [End Date] and was executed in accordance with all applicable federal and state requirements.
The undersigned, acting as Attorney-in-Fact for [Surety Company Name], certifies that the company is listed on the Department of the Treasury Circular 570 [if applicable], is licensed to transact surety business in [State], and possesses the financial capacity to fulfill its obligations under this bond. This authorization is granted under powers conferred by the company’s Board of Directors. A copy of the Power of Attorney is attached.
For verification of this bond’s standing or the authority of the signer, contact our office at [Phone Number] or [Email Address].
Sincerely,
[Signature]
[Printed Name], Attorney-in-Fact
[Corporate Seal]
A few customization notes. Remove the Treasury Circular 570 reference if the bond is not for a federal project. For court bonds, replace the project line with the case name, case number, and court. For license bonds, reference the licensing statute or regulation that requires the bond. Many obligees also publish their own required bond form; when they do, use theirs rather than a generic letter.
What You Need Before You Request the Letter
The surety matches every field on the letter to the legal record of the underlying obligation. A misspelling or wrong figure is the single most common reason letters get rejected or returned for correction. Before you contact your surety or broker, confirm each of the following:
- The principal’s full legal name, exactly as it appears on the contract or license application.
- The obligee’s full legal name and address. Even a minor misspelling here can trigger a rejection.
- The bond amount, or penal sum, which is the maximum dollar amount the surety is liable for if the principal defaults. For performance bonds on federal projects, this amount is set by the contracting officer; for payment bonds, it equals the total contract price unless the officer determines otherwise.1Office of the Law Revision Counsel. 40 USC 3131 – Bonds of Contractors of Public Buildings or Works
- The project title and contract number, for contract bonds, or the equivalent license or case identifier for other bond types.
- The bond term — the start and end dates of coverage. A wrong date creates a gap that can void your contract or license.
Most surety brokers and many licensing agencies offer digital request portals where you enter this information directly. Check every field against the underlying document before submitting. If the obligee’s name or the bond amount comes back wrong, the surety has to issue a formal rider to correct the letter, which adds time and sometimes a fee.
What Makes the Letter Legally Valid
Obligees treat a surety bond letter as a legal instrument. Missing any of the standard authentication markers can get the whole document kicked back.
Letterhead, Seal, and Authorized Signature
The letter must appear on the surety company’s official corporate letterhead. Federal regulations require that a bond executed by a corporate surety include both an authorized signature and the corporate seal affixed immediately next to that signature.2eCFR. 19 CFR 113.37 – Corporate Sureties The seal must comply with the law of the state where the bond is executed.3eCFR. 19 CFR Part 113 Subpart C – Bond Requirements
The signer is typically an attorney-in-fact, someone authorized by the surety’s board of directors to bind the company up to a specified dollar limit. Federal acquisition rules require that anyone signing a bond as attorney-in-fact include evidence of their authority, usually an original or copy of their power of attorney.4Acquisition.GOV. FAR 28.101-3 – Authority of an Attorney-in-Fact for a Bid Bond Obligees often verify the power of attorney independently, so the attached copy needs to be current and cover the bond amount in question.
Treasury Circular 570 for Federal Projects
For federal work, the surety company must appear on the Department of the Treasury’s Circular 570, the official list of companies holding certificates of authority to write or reinsure federal bonds.5Bureau of the Fiscal Service. Surety Bonds Corporate sureties offered for bonds on contracts performed in the United States must appear on this list.6Acquisition.GOV. FAR 28.202 – Acceptability of Corporate Sureties Many state and local obligees also require that the surety be licensed and admitted to do business in the jurisdiction where the bond is issued.
Federal Context for Contract Bonds
If the bond letter supports a federal construction contract, the underlying bond requirements come from 40 U.S.C. Chapter 31 (formerly the Miller Act): contracts exceeding $150,000 require both a performance bond and a payment bond. For contracts between $35,000 and $150,000, the contracting officer selects alternative payment protections such as an irrevocable letter of credit or escrow agreement.7Acquisition.GOV. FAR 28.102-1 General The letter you send references the bond that satisfies that requirement; it does not substitute for it.
Electronic Signatures and Digital Seals
Paper is no longer the only option. The federal E-Sign Act provides that a signature or contract cannot be denied legal effect solely because it is in electronic form.8Office of the Law Revision Counsel. 15 USC 7001 – General Rule of Validity Nearly all states have also adopted the Uniform Electronic Transactions Act, which provides a parallel state-level framework. Federal agencies including the General Services Administration and the Department of Defense have issued guidance allowing electronic bond execution and dropping the requirement for physical seals in many contexts.
The obligee still has to consent to receiving the bond electronically. Some agencies run fully digital portals. Others still insist on wet signatures and embossed seals. Confirm the obligee’s requirements before assuming an e-bond will be accepted. Where electronic bonds are used, the surety’s system should carry digital signature technology, unalterable electronic powers of attorney, and encrypted transmission.
If You Actually Need a Pre-Qualification Letter Instead
These two documents get confused constantly, and mixing them up can cost you a bid. A pre-qualification letter, sometimes called a bondability letter, is a reference from your surety saying you are likely bondable up to a certain dollar amount. It carries no guarantee and does not obligate the surety to issue an actual bond. Contractors use pre-qualification letters to get on bid lists and demonstrate financial credibility to general contractors and project owners before a specific project is on the table.
A bond commitment letter, by contrast, confirms that the surety has issued a bond for a specific obligation and names the principal, the obligee, the bond number, and the penal sum. The sample above is a commitment letter. If what you need is bidding credibility rather than proof of an issued bond, ask your surety for a pre-qualification letter instead. These usually include the surety’s financial rating, confirmation that the company appears on the Treasury Department’s approved list, your single-project and aggregate bonding capacity, and a disclaimer stating that the letter should not be treated as a bid or performance bond.
Fixing Mistakes With a Bond Rider
If the letter goes out with a misspelled name, wrong address, incorrect bond amount, or outdated project description, the surety issues a bond rider rather than rewriting the entire bond. A rider is a formal amendment that updates specific terms while leaving the core bond intact.
The process is straightforward. Identify the error, contact your surety or broker, and provide documentation supporting the change — a legal name change certificate, an amended contract, or corrected address proof. The surety reviews the request, and for minor clerical fixes, approval is usually quick. Changes that increase the bond amount can trigger additional underwriting and a premium adjustment, since the surety is taking on more risk. Once issued, the rider goes to both the obligee and the principal so every party’s records match.
Catching errors before submission is always faster and cheaper than correcting them after the obligee has recorded the bond. Compare every field on the letter against the underlying contract or license application before you send it.