Pledging Accounts Receivable: Borrowing Base, Lockbox, and UCC Filings

Pledging accounts receivable means using your business’s unpaid customer invoices as collateral for a loan. The business keeps ownership of the invoices and keeps collecting from customers as usual, while the lender advances cash against the invoice balance, typically 70 to 85 percent of the receivables it considers eligible. It is a secured loan, not a sale, and the borrower stays on the hook for repayment whether or not customers pay.

How the Facility Operates

The borrower (the pledgor) signs a revolving credit facility with the lender (the pledgee). The lender looks at the pool of outstanding invoices, decides which ones qualify as collateral, and sets a credit limit from there. The borrower draws against that limit as working capital is needed, and interest accrues only on the amount actually drawn.

The collateral pool moves constantly. New invoices come in, old ones get paid, and the amount of credit available shifts with it. Lenders require regular reporting to track this, usually weekly aging schedules, so both sides know the current borrowing capacity. Interest is normally priced off a floating benchmark like the Secured Overnight Financing Rate (SOFR) or the Prime Rate, plus a negotiated margin. On top of interest, the borrower pays operational fees, including charges for the periodic field exams and collateral audits the lender uses to verify the quality of the pledged receivables.

The Borrowing Base

Not every invoice counts toward what you can borrow. The borrowing base starts with total receivables and gets pared down by eligibility rules before an advance rate is applied.

Lenders routinely exclude invoices past due beyond a set threshold (often 90 days), invoices owed by customers in financial distress, and foreign receivables that aren’t backed by credit insurance. Customer concentration limits apply as well. If one customer makes up too much of the pool, the excess gets stripped out. Concentration caps commonly sit near 20 percent, though the exact figure depends on the industry and the customer mix.

Cross-aging is another standard filter. If a set percentage of a single customer’s invoices are delinquent, the lender can disqualify that customer’s entire balance, not just the overdue slice. The OCC describes this as sometimes called the “10 percent rule,” because 10 percent delinquency on one customer’s receivables is a common trigger for knocking out all of that customer’s invoices.1Office of the Comptroller of the Currency. Comptroller’s Handbook – Asset-Based Lending

After the ineligible invoices are carved out, the lender applies an advance rate to what’s left. Advance rates typically fall between 70 and 85 percent of eligible receivables, and some lenders go up to 90 percent for strong business-to-business accounts. Effective advance rates often run lower after historical dilution and minimum reserve levels are subtracted.1Office of the Comptroller of the Currency. Comptroller’s Handbook – Asset-Based Lending

Lockbox and Cash Control

Most facilities route customer payments on pledged invoices through a lockbox: a controlled bank account that the lender uses to pay down the outstanding loan balance automatically. That mechanism is what makes the collateral self-liquidating.

How tightly the lender holds that account varies. Under full dominion, the lender controls all cash collections and applies them to the loan before releasing anything back to the borrower. Under springing dominion, the lender collects the payments but passes them through to the borrower’s operating account as long as the borrower stays in compliance with the loan agreement. If the borrower trips a covenant or drops below a required availability threshold, the lender’s control “springs” into effect and payments start going straight to the loan balance.1Office of the Comptroller of the Currency. Comptroller’s Handbook – Asset-Based Lending

The difference shows up in day-to-day cash management. Full dominion means every dollar runs through the lender first, so the borrower has less flexibility. Springing dominion gives the borrower more operational room, which is why it tends to be the default for borrowers in stable condition.

Security Agreements and UCC Filings

The legal spine of the arrangement is a security agreement. Under UCC Article 9, a security interest becomes enforceable (attaches) when three things happen together: the lender gives value by extending credit, the borrower has rights in the collateral, and both parties sign a security agreement describing the collateral.2Legal Information Institute. Uniform Commercial Code 9-310 – When Filing Required to Perfect Security Interest

Attachment alone only makes the interest enforceable between the two parties. To protect its claim against other creditors, the lender has to perfect the interest. UCC 9-310 generally requires filing a UCC-1 financing statement, usually with the secretary of state’s office in the state where the borrower is organized.2Legal Information Institute. Uniform Commercial Code 9-310 – When Filing Required to Perfect Security Interest There is a narrow exception: an assignment of accounts that does not transfer a significant part of the assignor’s outstanding receivables is automatically perfected on attachment, with no filing needed.3Legal Information Institute. Uniform Commercial Code 9-309 – Security Interest Perfected Upon Attachment Any meaningful A/R facility will cover a significant portion of the borrower’s receivables, so filing is almost always required.

The UCC-1 filing establishes priority. When multiple creditors claim the same receivables, priority generally goes to whoever filed or perfected first.4Legal Information Institute. Uniform Commercial Code 9-322 – Priorities Among Conflicting Security Interests and Agricultural Liens That’s why lenders run lien searches before closing and file their UCC-1 quickly after.

Notification vs. Non-Notification

Most pledging facilities operate on a non-notification basis. The borrower’s customers never learn their invoices are pledged. Payments arrive as usual, the borrower routes them to the lockbox, and the customer relationship stays intact.

Notification is a remedy, not a default feature. If the borrower defaults or the lender loses confidence in the borrower’s collections, the lender can notify customers directly. Once a customer has received proper notice that a receivable has been assigned or pledged, that customer can only discharge the obligation by paying the lender. Paying the borrower after notice doesn’t count.

What Happens If the Borrower Defaults

Because pledging is a loan, the borrower owes the full balance whether or not customers pay. If a customer never pays an invoice, the loss falls on the borrower. The receivables are collateral, not the legal source of repayment. That is what makes pledging a full-recourse arrangement.

When the borrower defaults on the loan itself, UCC Article 9 opens up a menu of lender remedies. The lender can notify customers to redirect payments, collect directly on the outstanding invoices, and exercise the collection rights the borrower had.2Legal Information Institute. Uniform Commercial Code 9-310 – When Filing Required to Perfect Security Interest In practice the lender sends notification letters to every account debtor, takes control of the lockbox, and applies incoming payments to the outstanding balance.

Fraud carries much heavier consequences. Fabricating invoices, pledging the same receivables to two different lenders, or inflating an aging schedule to make stale invoices look current can lead to civil liability and criminal charges for bank fraud or wire fraud, depending on the jurisdiction and dollar amounts involved.

How It Shows Up on the Books

Under GAAP, pledging is a secured borrowing, not a sale. The test under ASC 860 is whether control over the financial assets has been surrendered. A transfer is treated as a sale only if the assets are isolated from the transferor, the buyer can freely pledge or exchange them, and the transferor doesn’t maintain effective control. A pledging arrangement meets none of those: the borrower keeps ownership, keeps collecting, and can substitute collateral. The receivables stay on the borrower’s balance sheet.

The loan proceeds appear as a corresponding liability, usually a line of credit or note payable under current liabilities. The business has more debt, not fewer assets. The current ratio generally decreases because current liabilities rise while current assets are unchanged, and the debt-to-equity ratio rises as well. Interest on the facility runs through the income statement over the life of the loan.

Interest Deductibility

Interest paid on an A/R line of credit is business interest expense and is generally deductible. For tax years beginning after December 31, 2025, Section 163(j) caps the deduction at 30 percent of adjusted taxable income, calculated on an EBITDA basis after the One, Big, Beautiful Bill restored the add-back of depreciation and amortization.5Internal Revenue Service. IRS Updates Frequently Asked Questions on Changes to the Limitation on the Deduction for Business Interest Expense Businesses with average annual gross receipts of $30 million or less over the prior three years are generally exempt from this cap. For larger borrowers, not all interest on an A/R facility may be immediately deductible in a thin-margin year.

Pledging vs. Factoring

Pledging and factoring both convert outstanding invoices into cash, but the underlying structure is completely different. Pledging is a loan. Factoring is a sale.

In factoring, the business sells its invoices to a third party (the factor) at a discount. The factor takes ownership, handles collections, and usually notifies the customer to pay the factor directly. The business gets cash right away but gives up control of those customer interactions. In non-recourse factoring, the factor also absorbs the credit risk; if the customer doesn’t pay, the loss belongs to the factor.

Pledging runs the opposite way on almost every dimension. The business keeps ownership of the invoices, keeps running collections, and bears the full credit risk if a customer fails to pay. Customers usually don’t know the arrangement exists. The tradeoff: pledging puts debt on the balance sheet, while factoring, if structured as a true sale under ASC 860, removes the receivable from it entirely.

A few concrete differences:

  • Ownership of the invoices stays with you under pledging; a factor takes title.
  • You handle collections when pledging; the factor handles them under factoring.
  • You carry all customer non-payment risk when pledging; non-recourse factoring shifts that risk to the factor.
  • Pledging is typically non-notification; factoring almost always involves notifying customers.
  • Pledging adds debt to the balance sheet; factoring removes the receivable when it qualifies as a sale.

When Pledging Fits

Pledging works best for businesses with a steady flow of commercial invoices and customers who pay on predictable schedules. Manufacturing, staffing, wholesale distribution, and transportation lean on it because they carry long payment cycles but need cash for payroll, materials, and operations well before customers pay. Government contractors use it for similar reasons: the invoices are high quality, but payment can take time.

It’s less practical for businesses that sell mostly to consumers, deal in small-dollar transactions, or carry thin receivable balances. It also loses its appeal when the receivable pool is concentrated in one or two customers, because eligibility exclusions will carve out so much of the base that the remaining credit isn’t worth the cost and compliance load.

Compared to factoring, pledging costs less on a percentage basis and lets the business keep direct customer relationships. The downsides are the debt obligation, the ongoing reporting and covenant compliance, and the fact that collection risk stays with the borrower. For a business that wants cash without added debt and doesn’t mind handing off collections, factoring may fit better. For one that values control and can manage a revolving facility, pledging is the more sophisticated tool.