IRS Publication 15-T: Federal Income Tax Withholding Methods

IRS Publication 15-T, Federal Income Tax Withholding Methods, is the document that tells employers how much federal income tax to take out of each paycheck. It gives you two ways to run the calculation: the Wage Bracket Method, which is a table lookup, and the Percentage Method, which is a bracket formula. The IRS republishes it every year to reflect updated brackets, standard deduction figures, and other inflation adjustments, so you need the current edition each January.1Internal Revenue Service. About Publication 15-T, Federal Income Tax Withholding Methods

Which method you use is your choice. The Wage Bracket Method is easier for manual payroll but only covers annual wages up to roughly $100,000. The Percentage Method has no upper limit and is what most automated systems use. Both draw their inputs from the same source: the employee’s Form W-4.

What You Pull from Form W-4

Every calculation begins with the Form W-4 the employee gave you. You are not responsible for auditing what they wrote — your job is to apply the entries correctly.2Internal Revenue Service. Topic No. 753, Form W-4, Employee’s Withholding Certificate Five pieces of data drive the math:

  • Filing status from Step 1 (Single or Married Filing Separately, Married Filing Jointly, or Head of Household). This selects which set of tables or rate schedules you use.
  • The multiple-jobs checkbox in Step 2(c). If checked, standard deduction and bracket widths are cut in half for that job, which increases per-paycheck withholding. Whether it’s checked changes which rate schedule you pull.3Internal Revenue Service. Form W-4 (2026), Employee’s Withholding Certificate
  • The Step 3 credit amount (usually for dependents). This is an annual figure you subtract from withholding.
  • Step 4(a) other income and Step 4(b) additional deductions. Step 4(a) increases the wages subject to withholding; Step 4(b) decreases them.
  • Step 4(c) additional withholding. A flat dollar amount added to the final per-period result.4Internal Revenue Service. About Form W-4, Employee’s Withholding Certificate

The Wage Bracket Method

Start by choosing the table in Publication 15-T that matches the employee’s pay period (weekly, biweekly, semimonthly, or monthly) and whether the W-4 is from 2020 or later.5Internal Revenue Service. Publication 15-T (2026), Federal Income Tax Withholding Methods

Then work out the Adjusted Wage Amount for the pay period. Take the gross pay for the period, add the per-period share of any Step 4(a) other income, and subtract the per-period share of any Step 4(b) deductions.

Find the row where the Adjusted Wage Amount falls between the “At least” and “But less than” columns. Read across to the column for the employee’s filing status and Step 2 status. That figure is the tentative withholding, and it already accounts for the standard deduction.

Two adjustments finish the calculation. Divide the annual Step 3 credit amount by the number of pay periods and subtract it from the tentative withholding, but not below zero. Then add any Step 4(c) flat dollar amount. That is what you withhold.

The Percentage Method

The Percentage Method uses the same marginal-rate logic as the underlying income tax brackets, so it works at any income level.1Internal Revenue Service. About Publication 15-T, Federal Income Tax Withholding Methods

First, annualize the gross pay for the period. A biweekly employee earning $2,500 per paycheck annualizes to $65,000 (26 pay periods). Add the full annual Step 4(a) amount, subtract the full annual Step 4(b) amount, then subtract the standard deduction for the filing status shown on the worksheet. The result is the Adjusted Annual Wage Amount.6Internal Revenue Service. Publication 15-T (2026), Federal Income Tax Withholding Methods

Next, apply that figure to the correct rate schedule. Publication 15-T publishes separate schedules by filing status and Step 2 status. The schedules use seven marginal rates: 10%, 12%, 22%, 24%, 32%, 35%, and 37%.5Internal Revenue Service. Publication 15-T (2026), Federal Income Tax Withholding Methods For 2026, the Standard Withholding Rate Schedule for a Single filer with Step 2 unchecked is:

  • $0 to $7,500: 0%
  • $7,500 to $19,900: 10% of the amount over $7,500
  • $19,900 to $57,900: $1,240 plus 12% of the amount over $19,900
  • $57,900 to $113,200: $5,800 plus 22% of the amount over $57,900
  • $113,200 to $209,275: $17,966 plus 24% of the amount over $113,200
  • $209,275 to $263,725: $41,024 plus 32% of the amount over $209,275
  • $263,725 to $648,100: $58,448 plus 35% of the amount over $263,725
  • $648,100 and above: $192,979.25 plus 37% of the amount over $648,100

Find the bracket that contains the Adjusted Annual Wage Amount, take the base dollar amount for that bracket, and add the marginal percentage applied to the portion above the bracket’s floor. That produces the annual federal income tax. Subtract the full annual Step 3 credit amount, divide by the number of pay periods, and add any Step 4(c) additional withholding. The result is the per-paycheck withholding.

These rates were set permanently by Public Law 119-21, which locked in the individual income tax structure from the Tax Cuts and Jobs Act rather than letting it expire after 2025.7Internal Revenue Service. Publication 15 (2026), Employer’s Tax Guide The bracket thresholds still adjust each year for inflation; the rate percentages do not.

Handling Pre-2020 W-4 Forms

Some employees still have W-4s on file from before 2020, when the form used “withholding allowances” instead of the current step-based system. You do not have to ask them for a new form. Publication 15-T gives you two ways to work with the old versions.5Internal Revenue Service. Publication 15-T (2026), Federal Income Tax Withholding Methods

The first option is to use the separate wage bracket and percentage method tables that Publication 15-T publishes specifically for pre-2020 W-4s. They work directly with the old marital-status and allowance inputs.

The second option is a computational bridge that converts the old data into 2020-or-later equivalents so you can run one set of tables for everyone. Four steps:

  • Convert the marital status. “Single” or “Married, but withhold at higher single rate” becomes Single or Married Filing Separately. “Married” becomes Married Filing Jointly. Head of Household cannot be produced through the bridge.
  • Enter a fixed amount in Step 4(a): $8,600 for Single or Married Filing Separately, $12,900 for Married Filing Jointly.
  • Multiply the allowances on line 5 of the old form by $4,300 and enter that in Step 4(b).
  • Leave Step 2 unchecked. The bridge does not produce a Step 2 equivalent, so the standard rate schedules apply.

Either path gives the same result. The bridge is mainly useful when you’d rather maintain one calculation pathway than two.

Nonresident Aliens and Exempt Employees

Two categories of employees need special handling before you touch the tables.

For a nonresident alien employee, add an extra amount to the annualized wages before running either method. Add $16,100 if the W-4 is dated 2020 or later, or $11,800 for a pre-2020 W-4. The addition compensates for the fact that nonresident aliens generally cannot claim the same standard deduction as U.S. residents.6Internal Revenue Service. Publication 15-T (2026), Federal Income Tax Withholding Methods

An employee who had no tax liability last year and expects none this year can claim total exemption from federal income tax withholding by writing “Exempt” on their W-4. The exemption expires each year. To keep it, the employee must file a new W-4 by February 15 of the following year. If they don’t, you start withholding as if they had filed a W-4 with Single filing status and no other entries. Exemption from income tax withholding does not exempt Social Security or Medicare tax, and nonresident aliens cannot claim the exemption at all.7Internal Revenue Service. Publication 15 (2026), Employer’s Tax Guide

Supplemental Wages

Bonuses, commissions, severance pay, accumulated sick leave, and similar payments outside regular salary count as supplemental wages, and you have two ways to withhold on them.7Internal Revenue Service. Publication 15 (2026), Employer’s Tax Guide

The flat rate method withholds 22% on cumulative supplemental wages up to $1 million per employee per calendar year, regardless of what the W-4 says. Above $1 million, a mandatory 37% rate applies to every dollar over the threshold, even if the employee claimed exemption from withholding.

The aggregate method combines the supplemental payment with regular wages for the current or immediately preceding pay period, runs withholding on the total using either the Wage Bracket or Percentage Method, and subtracts the tax already withheld on the regular wages alone. The remainder is what you withhold on the supplemental portion. It’s more tailored but takes more work, and a large bonus can push the combined amount into a higher bracket for that period.

Non-Cash Fringe Benefits

Taxable non-cash fringe benefits, such as personal use of a company vehicle or an employer-paid gym membership, also require federal income tax withholding. You can add the value to regular wages and withhold on the combined total, or treat it as supplemental wages and apply the 22% flat rate.8Internal Revenue Service. Publication 15-B (2026), Employer’s Tax Guide to Fringe Benefits

For employer-provided vehicles, you can elect not to withhold federal income tax on the personal-use value, provided you notify the employee in writing and report the value on the W-2. Social Security and Medicare tax still apply. You must set the value of taxable non-cash benefits no later than January 31 of the following year, though you can use a reasonable estimate during the year for deposit purposes.

Rounding

Publication 15-T lets you reduce the last digit of wages to zero, or round wages to the nearest dollar before calculating. You may also round the final per-period withholding to the nearest dollar (under 50 cents drops, 50 to 99 cents rounds up). Whichever approach you pick, apply it the same way every pay period.5Internal Revenue Service. Publication 15-T (2026), Federal Income Tax Withholding Methods

Lock-in Letters

If the IRS decides an employee’s withholding is too low, it can override the W-4 with a lock-in letter. The letter specifies the withholding arrangement you must use, and it takes effect no sooner than 60 calendar days after the letter’s date.9Internal Revenue Service. Withholding Compliance Questions and Answers

Once a lock-in is in effect, you can’t reduce the employee’s withholding below the letter’s level unless the IRS tells you to. If the employee submits a new W-4 that would increase withholding above the lock-in, honor it. If a new W-4 would decrease it, ignore the new form. Block the employee from using any online W-4 system to lower withholding. A modification letter (Letter 2808C) from the Withholding Compliance Program takes effect immediately. If the employee left before the lock-in takes effect no action is required, but if they come back within 12 months, the lock-in applies from their first day back.

Depositing, Reporting, and Records

Running the withholding correctly only helps if the money is deposited on time. The IRS assigns you a monthly or semi-weekly deposit schedule based on a lookback period, which you determine before the start of each calendar year using Publication 15.10Internal Revenue Service. Depositing and Reporting Employment Taxes Federal income tax withheld goes into the same deposit as both shares of Social Security and Medicare tax.

Report the totals on Form 941, Employer’s Quarterly Federal Tax Return, due by the last day of the month after each quarter: April 30, July 31, October 31, and January 31. If every deposit for the quarter was on time and in full, you get a 10-day extension.11Internal Revenue Service. Instructions for Form 941 (03/2026)

Keep every W-4, worksheet, and employment tax record for at least four years after filing the fourth-quarter return for that year. Records tied to certain pandemic-era credits (qualified sick leave, family leave, and employee retention credits for wages paid after specific 2021 dates) must be kept for six years.12Internal Revenue Service. Employment Tax Recordkeeping

Penalties

Failure-to-deposit penalties escalate with delay:13Internal Revenue Service. Failure to Deposit Penalty

  • 1 to 5 calendar days late: 2% of the unpaid deposit
  • 6 to 15 days late: 5%
  • More than 15 days late: 10%
  • More than 10 days after a first IRS notice, or on receipt of a demand for immediate payment: 15%

The tiers don’t stack. At 20 days late you owe 10%, not the sum.

The bigger risk is the Trust Fund Recovery Penalty. Federal income tax withheld and the employee’s share of Social Security and Medicare tax are trust fund taxes held for the government. Anyone responsible for collecting and paying them over who willfully fails to do so can be held personally liable for the full amount, dollar for dollar.14Office of the Law Revision Counsel. 26 U.S. Code 6672 – Failure to Collect and Pay Over Tax, or Attempt to Evade or Defeat Tax That personal liability reaches past the business entity to owners, officers, and anyone with authority over company finances. The IRS must give written notice at least 60 days before assessing the penalty, and if multiple people share responsibility, each can seek contribution from the others.