IRC Section 460: PCM, Look-Back Method, and Exceptions

The IRC Section 460 rules for long-term contracts require most contractors and certain manufacturers to recognize income as work progresses, using the Percentage of Completion Method (PCM), rather than waiting until a job is finished. The statute’s default catches any contract to build, install, construct, or manufacture property that isn’t completed in the same tax year it starts.1Office of the Law Revision Counsel. 26 USC 460 – Special Rules for Long-Term Contracts Exceptions exist for smaller construction firms and for residential work, and those exceptions matter because they open the door to the more tax-friendly Completed Contract Method. Everyone else runs the PCM formula every year and settles up at the end with a look-back interest calculation.

When a Contract Is Long-Term Under Section 460

The test is calendar-based. If a contract begins in one tax year and isn’t complete by year-end, it’s a long-term contract for Section 460 purposes. A deal signed on December 30 and wrapped up on January 2 qualifies for a calendar-year taxpayer, even though only a few days crossed the line.

Construction contracts are the usual candidates. Manufacturing contracts fall under Section 460 only if the item is either unique (not something the manufacturer normally carries in finished goods inventory) or normally takes more than 12 months to produce regardless of what the contract says.2Office of the Law Revision Counsel. 26 US Code 460 – Special Rules for Long-Term Contracts A shipbuilder building a custom vessel is covered. A factory turning out standard widgets on a multi-year supply agreement is not.

The rules apply to corporations, partnerships, S corporations, and individuals in covered activities. A contract’s commencement date is the first date any costs other than bidding expenses are incurred, and that date drives several downstream timing questions.

Exceptions That Let You Skip PCM

Small Construction Contract Exception

A construction contract escapes mandatory PCM if two conditions are met when it’s signed. The taxpayer must reasonably expect to finish within two years of the commencement date, and the taxpayer must pass the gross receipts test under Section 448(c), which looks at average annual gross receipts over the three preceding tax years.3Office of the Law Revision Counsel. 26 USC 460 – Special Rules for Long-Term Contracts – Section: Exception for Certain Construction Contracts The Tax Cuts and Jobs Act set the threshold at $25 million, and annual inflation adjustments have pushed it to roughly $31 million for recent tax years. The IRS publishes the updated number each fall.

Contractors who meet both prongs can elect the cash method, accrual method, or Completed Contract Method (CCM). CCM is usually the most attractive because it defers all profit recognition to the year the project finishes.4Internal Revenue Service. Land Developers and Subcontractors – Proper Method of Accounting This exception covers construction only. Manufacturing contracts caught by Section 460 have no equivalent small-business carve-out.

Home Construction Contracts

A separate exception applies to home construction contracts regardless of contractor size. A contract qualifies if 80 percent or more of estimated total contract costs go to dwelling units in buildings containing four or fewer units, plus directly related site improvements.5Office of the Law Revision Counsel. 26 USC 460 – Special Rules for Long-Term Contracts – Section: Definitions Relating to Residential Construction Contracts Each townhouse counts as a separate building, so a row of six townhouses can still qualify. Contractors on these projects are fully exempt from mandatory PCM and from look-back, and may elect CCM.

Larger Residential Construction

Residential construction contracts follow the same 80 percent definition but drop the four-unit cap. A 200-unit apartment building qualifies. If the taxpayer doesn’t also meet the small contractor exception, the choice is PCM or a hybrid called the Percentage of Completion-Capitalized Cost Method (PCCM), under which only a portion of contract income runs through PCM and the rest is deferred to completion.6eCFR. 26 CFR 1.460-3 – Long-Term Construction Contracts PCCM is less favorable than CCM but easier on cash flow than straight PCM.

How the Percentage of Completion Method Works

For contracts with no exception, PCM is mandatory. You recognize income each year in proportion to the work completed so far. The measurement rule is fixed: cost-to-cost. Engineering estimates, physical inspection, or other progress measures don’t substitute.

Divide the cumulative allocable costs incurred through year-end by the total estimated allocable contract costs. That ratio is your completion percentage. Multiply it by the total contract price to get cumulative gross receipts to date, then subtract whatever you recognized in prior years to arrive at the current year’s income.7Office of the Law Revision Counsel. 26 USC 460 – Special Rules for Long-Term Contracts – Section: Percentage of Completion Method

Take a $5,000,000 contract with $4,000,000 in estimated costs. In Year 1 the contractor incurs $1,000,000 in allocable costs. Completion percentage is 25 percent, cumulative gross receipts are $1,250,000, and taxable income for Year 1 is $250,000. In Year 2, if the contractor incurs another $1,500,000, cumulative costs are $2,500,000 and completion is 62.5 percent. Cumulative recognized gross receipts jump to $3,125,000; subtract the $1,250,000 already booked in Year 1 and Year 2 gross receipts are $1,875,000, producing $375,000 of Year 2 income.

Cost overruns and change orders are absorbed automatically. Each year you drop the updated estimate into the denominator, recompute the cumulative percentage, and subtract prior-year recognized income. A jump in total estimated cost pushes the current year’s percentage down and can drag recognized income with it. A downward revision has the opposite effect and can accelerate income into a single year.8eCFR. 26 CFR 1.460-4 – Methods of Accounting for Long-Term Contracts

Which Costs Go Into the Formula

Cost allocation matters because inflating the denominator slows income recognition and shrinking it speeds recognition up. Section 460 requires allocating every cost that directly benefits or is incurred because of the contract: direct materials, labor, subcontractor payments, plus indirect costs like equipment depreciation and job-site overhead.9Office of the Law Revision Counsel. 26 USC 460 – Special Rules for Long-Term Contracts – Section: Allocation of Costs to Contract

Production-period interest gets special handling and must be allocated to the contract using the Section 263A capitalization framework. The production period begins on the later of the commencement date or, for accrual-method taxpayers, the date at least 5 percent of estimated costs have been incurred.

Some costs never make it into the contract base:

  • Independent research and development not tied to an existing contract
  • Costs of unsuccessful bids and proposals
  • Marketing and selling costs

The 10 Percent Deferral Election

Early in a job, mobilization, design, and setup can create a bulge of costs against very little real progress. A taxpayer can elect to defer all income and cost recognition on a contract until the first year in which at least 10 percent of the total estimated costs have been incurred.10Office of the Law Revision Counsel. 26 US Code 460 – Special Rules for Long-Term Contracts – Section: Election to Use 10-Percent Method Once the threshold is crossed, the deferred amounts land in that year’s PCM calculation and normal recognition resumes.

The election covers every long-term contract entered into during the election year and every year thereafter. It’s not available to taxpayers using the simplified cost allocation method, and it doesn’t turn off look-back.

The Look-Back Method at Contract Completion

PCM runs on estimates, and estimates are usually wrong. When a contract is complete, the taxpayer has to recompute what each prior year’s income allocation would have been had the actual final price and actual final costs been known from day one.11Office of the Law Revision Counsel. 26 USC 460 – Special Rules for Long-Term Contracts – Section: Look-Back Method

Prior returns are not amended. Instead, the recalculation produces a hypothetical underpayment or overpayment of tax for each contract year. If profit was underestimated during the job, tax was deferred and the taxpayer owes interest on that deferral. If profit was overestimated, the IRS pays interest.12eCFR. 26 CFR 1.460-6 – Look-Back Method The rate is the adjusted overpayment rate under Section 6621, compounded daily, and the IRS publishes it quarterly.13Internal Revenue Service. Internal Revenue Bulletin 2026-08

The De Minimis Exception

A completed contract escapes look-back if two conditions are both met: the final gross price doesn’t exceed the lesser of $1,000,000 or 1 percent of the taxpayer’s average annual gross receipts for the three preceding tax years, and the contract was completed within two years of the commencement date.14Office of the Law Revision Counsel. 26 USC 460 – Special Rules for Long-Term Contracts – Section: Look-Back Method Not to Apply to Certain Contracts For a contractor averaging $20 million in gross receipts, the threshold is $200,000, because 1 percent of $20 million is less than $1,000,000. Many smaller projects that fall under PCM still avoid the look-back paperwork this way.

Form 8697

The look-back computation goes on Form 8697. It has to be filed for every tax year in which a PCM contract is completed, and again in any later year when the price or costs are adjusted after completion.15Internal Revenue Service. Instructions for Form 8697 – Interest Computation Under the Look-Back Method for Completed Long-Term Contracts The form calculates the interest owed or refundable.

Pass-Through Entities

Partnerships, S corporations, and non-closely-held trusts run the look-back at the entity level rather than pushing it out to owners. An entity is closely held if 50 percent or more of the beneficial interests by value are held directly or indirectly by five or fewer persons at any point during a contract year with income under the contract.16Office of the Law Revision Counsel. 26 USC 460 – Special Rules for Long-Term Contracts – Section: Simplified Look-Back Method for Pass-Thru Entities Closely held entities can’t use the simplified entity-level method, so the calculation flows through to the individual partners or shareholders.

When One Contract Becomes Several (or Vice Versa)

The boundary of “a contract” can shift income timing significantly, and the IRS has authority to sever a single agreement into multiple contracts or aggregate multiple agreements into one whenever necessary to clearly reflect income. The factors include whether items in one agreement are independently priced, whether separate agreements have interdependent pricing, whether delivery or acceptance is separate, and whether a reasonable businessperson would have signed either piece on its own.

Phased projects are where this bites. A developer with a master agreement covering site work, vertical construction, and interior finishing may want to treat site work as its own contract so income can be deferred separately. The IRS will look at whether each phase was priced on its own and whether the contractor would have taken any phase in isolation on the same terms. Bundled pricing usually points to aggregation.

Changing Methods With Form 3115

A taxpayer using the wrong method, or one whose facts have changed, must file Form 3115 (Application for Change in Accounting Method) to switch.17Internal Revenue Service. Instructions for Form 3115 – Application for Change in Accounting Method The classic case is a growing contractor whose three-year average gross receipts push past the Section 448(c) threshold, disqualifying the small contractor exception and forcing a move from CCM to PCM.

Many long-term contract method changes qualify for automatic consent, meaning no user fee and no letter ruling. The taxpayer files Form 3115 with the return for the year of change and follows the applicable revenue procedure. Non-automatic changes require a user fee and IRS approval. A separate Form 3115 is generally needed for each distinct method change and each separate trade or business.

The switch produces a Section 481(a) adjustment reflecting the cumulative income difference between the old method and the new for all open contracts. A positive adjustment is normally spread over four tax years, which softens the one-time hit. Negative adjustments are recognized entirely in the year of change.