The four inventory valuation methods recognized under U.S. accounting practice are first-in first-out (FIFO), last-in first-out (LIFO), weighted average cost, and specific identification. Each assigns a different cost to the goods you sell and the goods still on your shelves, which changes both the profit you report and the federal tax you owe. Federal law then layers on rules about which method you can pick, how you elect it, and what happens when you change your mind.
Below is what each method does, the tax and reporting consequences that follow, and the IRS procedures that govern the choice.
FIFO: Oldest Costs Out First
FIFO assumes the oldest items in stock are sold first. This matches how goods physically move in most businesses, particularly grocery, pharmaceuticals, and retail where products expire or become outdated. The cost assigned to each sale comes from the earliest purchase price still in inventory.
When prices are rising, FIFO produces higher reported profits, because the cheaper, older costs flow into cost of goods sold while the more expensive recent purchases stay on the balance sheet. The balance sheet ends up close to current replacement cost. The income figure ends up higher, and so does the tax bill.
U.S. accounting standards require FIFO inventory to be measured at the lower of cost or net realizable value.1Financial Accounting Standards Board. Accounting Standards Update 2015-11, Inventory (Topic 330) If the expected selling price, minus reasonable completion and disposal costs, falls below the recorded cost, you write the inventory down and recognize the loss in that period.
LIFO: Newest Costs Out First
LIFO flips the assumption. The most recently purchased items are treated as sold first. The actual goods do not have to move that way physically; LIFO is a cost-flow assumption, not a warehouse rule. Matching the newest, highest costs against current revenue generally lowers taxable income when prices are climbing.
The trade-off sits on the balance sheet. Because the oldest purchase prices remain as the recorded value of unsold inventory, the book figure can lag far behind what the goods are actually worth. Over many years, stale cost layers can create a growing gap between book value and replacement cost.
The LIFO Reserve
Companies using LIFO disclose a “LIFO reserve” in their financial statement footnotes: the cumulative difference between what cost of goods sold would have been under FIFO and what it actually was under LIFO.2U.S. Securities and Exchange Commission. The LIFO Coalition Comment Letter Regarding File Number 4-600 It is a calculated number, not cash in an account. Analysts use it to convert LIFO results back to a FIFO basis for comparison. For companies with decades of inventory layers, the reserve can run into hundreds of millions of dollars.
The LIFO Conformity Rule
Federal law attaches a string to LIFO. Under 26 U.S.C. § 472(c), a business that uses LIFO on its federal return must also use LIFO as the primary method in any financial reports sent to shareholders, creditors, or other stakeholders.3Office of the Law Revision Counsel. 26 USC 472 – Last-in, First-out Inventories Treasury regulations reinforce this: no other inventory method may appear as the primary valuation in annual reports or credit statements.4eCFR. 26 CFR 1.472-2 – Requirements Incident to Adoption and Use of LIFO Inventory Method Supplemental FIFO data can appear in footnotes, but LIFO must be the headline number. Violating the conformity rule can cost you the LIFO election entirely.
Weighted Average Cost
The weighted average method divides the total cost of all goods available for sale by the total number of units to produce a single blended cost per unit. It fits fungible products like chemicals, grain, or fasteners, where one unit is indistinguishable from the next. Neither cost of goods sold nor ending inventory ends up skewed by one expensive or cheap batch.
How the average is calculated depends on the inventory system. In a periodic system, you compute one weighted average at the end of the accounting period using total costs and total units. In a perpetual system, a new weighted average is recalculated after every purchase, and each sale uses the average in effect at the time of that sale. Perpetual averaging produces slightly different income and inventory figures than periodic averaging because the cost per unit shifts with each transaction rather than being blended once at period-end.
Specific Identification
Specific identification tracks the exact purchase cost of every individual item from receipt through sale. It relies on unique identifiers like serial numbers, VINs, or RFID tags to tie each unit sold to a precise historical cost. It is the only method that assumes nothing about cost flow; it records what actually happened.
The method is practical only for businesses selling high-value, distinguishable goods: car dealerships, fine art galleries, custom furniture makers, heavy equipment dealers. For a company selling thousands of identical widgets, the recordkeeping would be prohibitive. Where it fits, it produces the closest match between revenue and the actual cost of the item that generated it. The IRS expects businesses using this method to maintain records that identify the cost of each item at the time of sale, not retroactively.
Write-Downs When Inventory Value Falls
Whichever cost-flow method you use, U.S. accounting standards prohibit carrying inventory at a value higher than what you can recover by selling it. The specific rule depends on the method:
- FIFO and weighted average: inventory is measured at the lower of cost or net realizable value. Net realizable value is the estimated selling price minus reasonably predictable costs to complete and sell the goods. When NRV drops below recorded cost, you write the inventory down and recognize the loss immediately.1Financial Accounting Standards Board. Accounting Standards Update 2015-11, Inventory (Topic 330)
- LIFO and the retail inventory method: these still use the older “lower of cost or market” framework, where “market” means current replacement cost, capped at NRV and floored at NRV minus a normal profit margin.
Under U.S. GAAP, once inventory is written down, that reduced value becomes the new cost basis. The write-down cannot be reversed in a later annual period even if the value recovers. This one-way ratchet distinguishes U.S. rules from international standards, which allow reversals up to the original cost.
For tax purposes, the IRS requires inventory valuation to conform to generally accepted accounting principles and clearly reflect income.5Office of the Law Revision Counsel. 26 USC 471 – General Rule for Inventories If you deduct for damaged, obsolete, or unsalable goods, keep documentation of the condition of the inventory, how you determined the reduced value, and evidence such as physical count sheets showing descriptions, quantities, and pricing.6Internal Revenue Service. Publication 334, Tax Guide for Small Business
Small Business Exemption From Inventory Rules
Not every business has to run a formal inventory system. Section 471(c) of the Internal Revenue Code, added by the Tax Cuts and Jobs Act, exempts qualifying small businesses from the traditional inventory rules. You qualify if your average annual gross receipts over the prior three tax years do not exceed the inflation-adjusted threshold under Section 448(c).5Office of the Law Revision Counsel. 26 USC 471 – General Rule for Inventories For tax years beginning in 2025 the threshold is $31 million; for 2026, $32 million.7Internal Revenue Service. Revenue Procedure 2024-40 Tax shelters are excluded regardless of size.
Qualifying businesses have two alternatives to traditional inventory accounting. The first is to treat inventory as non-incidental materials and supplies, deducting the cost of goods in the year they are provided to a customer instead of tracking them through a formal inventory system. The second is the financial statement method: use whatever inventory treatment appears on the company’s audited financial statements or, if there are no audited statements, whatever the internal books and records reflect.
The same gross receipts test also exempts qualifying small businesses from the uniform capitalization rules under Section 263A.8Office of the Law Revision Counsel. 26 USC 263A – Capitalization and Inclusion in Inventory Costs of Certain Expenses Section 263A normally requires producers and resellers to capitalize direct and indirect costs into inventory, including portions of overhead, rent, and depreciation that relate to production. Larger businesses that do not meet the gross receipts test remain subject to those capitalization requirements, which meaningfully increase the costs included in inventory valuations.
Electing LIFO and Changing Methods
Choosing LIFO for the First Time
To adopt LIFO, file IRS Form 970 with your tax return for the first year you intend to use it.9Internal Revenue Service. Application to Use LIFO Inventory Method (Form 970) If you miss the deadline, you can file an amended return within 12 months of the original filing date with Form 970 attached. As a condition of the election, you must agree to any adjustments the IRS determines are necessary to clearly reflect income. Refusing that condition disqualifies you from using LIFO.
Switching From One Method to Another
Changing an existing inventory method, whether from FIFO to weighted average, LIFO to FIFO, or any other shift, requires filing IRS Form 3115, Application for Change in Accounting Method.10Internal Revenue Service. Instructions for Form 3115 Many inventory method changes qualify for automatic consent, meaning the IRS does not need to individually approve the request. The original Form 3115 is attached to the tax return for the year of change, and a copy goes to the IRS National Office. Changes that do not qualify for automatic treatment need advance approval and a user fee.
Any method change triggers a Section 481(a) adjustment to prevent income from being counted twice or skipped entirely during the transition.11Office of the Law Revision Counsel. 26 USC 481 – Adjustments Required by Changes in Method of Accounting If the adjustment increases taxable income, the IRS generally lets it be spread over four tax years. If it decreases income, the full adjustment is typically taken in the year of change. The 481(a) adjustment can produce a significant one-time tax hit or benefit depending on the direction of the switch and how long the prior method was in use.
Penalties for Getting Inventory Valuation Wrong
Under 26 U.S.C. § 471(a), a taxpayer for whom inventories are necessary to determine income must value that inventory on a basis that conforms to best accounting practices in the trade and most clearly reflects income.5Office of the Law Revision Counsel. 26 USC 471 – General Rule for Inventories The IRS expects consistency year over year. Switching methods without authorization or manipulating inventory values to reduce taxable income exposes a business to accuracy-related penalties under Section 6662.
The standard penalty for an accuracy-related underpayment, including one caused by negligence or a substantial understatement of income, is 20% of the underpaid tax.12Office of the Law Revision Counsel. 26 USC 6662 – Imposition of Accuracy-Related Penalty on Underpayments For gross valuation misstatements, where the claimed value of property is 200% or more of the correct amount, the penalty doubles to 40% of the underpayment. These penalties apply on top of the tax owed plus interest.
GAAP and IFRS Do Not Line Up
U.S. GAAP allows all four major inventory methods: FIFO, LIFO, weighted average, and specific identification.1Financial Accounting Standards Board. Accounting Standards Update 2015-11, Inventory (Topic 330) International Financial Reporting Standards do not. IAS 2 permits only specific identification, FIFO, and weighted average; LIFO is not an allowable cost formula.13IFRS Foundation. IAS 2 Inventories
Multinationals with U.S. tax obligations and foreign-listed securities feel the mismatch. The LIFO conformity rule means a U.S. company using LIFO for tax must also use it in its primary financial statements, while IFRS-reporting subsidiaries or parent entities cannot use LIFO at all. Many global companies maintain parallel records or avoid LIFO to simplify cross-border reporting.
The write-down rules also diverge. U.S. GAAP prohibits reversing inventory write-downs in later annual periods. IFRS allows write-downs to be reversed up to the original cost if conditions improve. The same inventory can produce different income figures on a U.S. GAAP statement versus an IFRS statement even under the same cost-flow method.
How Long to Keep Inventory Records
The IRS requires businesses to keep records as long as they may be needed to support items on a tax return. For most situations that means at least three years from the date the return was filed. If the IRS suspects that more than 25% of gross income went unreported, the window extends to six years. Fraudulent returns have no limitation period at all.14Internal Revenue Service. Publication 583, Starting a Business and Keeping Records
Inventory records go further. Because inventory costs feed into the cost basis used to calculate gains and losses, the IRS advises keeping property-related records until the limitation period expires for the year in which the property is finally disposed of.15Internal Revenue Service. How Long Should I Keep Records For a LIFO company with cost layers dating back a decade or more, that can mean holding onto purchase records, physical count sheets, and pricing documentation for a very long time. Inventory forms should include descriptions, quantities, unit prices, and the names of the people who performed the count and the pricing.6Internal Revenue Service. Publication 334, Tax Guide for Small Business