Inventory at the Beginning of the Year for Tax Returns

Beginning inventory for tax returns is simply last year’s ending inventory carried forward. Whatever dollar value you reported for goods on hand at the close of the prior tax year becomes the first line of this year’s Cost of Goods Sold calculation. For a calendar-year business, the figure locked in on December 31 rolls over as the January 1 beginning inventory. The number has to match, and the valuation method behind it has to be the same one you used last year.

Where the Number Appears on Your Return

Corporations filing Form 1120 and partnerships filing Form 1065 report Cost of Goods Sold on Form 1125-A, where beginning inventory is Line 1.1Internal Revenue Service. Form 1125-A – Cost of Goods Sold The form then walks through purchases on Line 2, labor on Line 3, Section 263A costs on Line 4, other costs on Line 5, and ending inventory on Line 7, producing COGS on Line 8. Sole proprietors do the same calculation in Part III of Schedule C (Form 1040), starting with beginning inventory.2Internal Revenue Service. 2025 Instructions for Schedule C (Form 1040) Both forms also ask you to identify the valuation method and whether it changed during the year.

The rule that catches filers off guard: your beginning inventory this year must equal your ending inventory from last year’s return. If the two figures do not match, you owe the IRS an explanation. The only clean reason for a difference is an approved change in accounting method, which produces a Section 481(a) adjustment and forces a recalculation of the prior year’s closing inventory under the new method.1Internal Revenue Service. Form 1125-A – Cost of Goods Sold

How Beginning Inventory Drives Cost of Goods Sold

The COGS formula is Beginning Inventory plus Net Purchases minus Ending Inventory. Net Purchases includes freight and handling, reduced by returns and allowances. Add that to Beginning Inventory to get the total cost of goods available for sale, then subtract what is still on the shelves at year-end to arrive at the cost of what actually sold.

Because beginning inventory is the first input, any error there flows straight through. Overstate it by $10,000 and COGS is overstated by the same amount, understating gross profit and taxable income. Understate it and reported profit goes up along with the tax bill. The IRS pays close attention to the figure because it directly controls how much income a business reports, and the consistency principle in the regulations gives greater weight to using the same method year after year than to which method the business chose.3eCFR. 26 CFR 1.471-2 – Valuation of Inventories

Do You Even Need to Track Inventory This Way

Before working through valuation methods, check whether the traditional inventory rules apply to your business at all. Under IRC Section 471(c), businesses that meet the gross receipts test are exempt. For tax years beginning in 2026, you qualify if your average annual gross receipts over the prior three tax years do not exceed $32 million.4Internal Revenue Service. Rev. Proc. 2025-32

Qualifying businesses have two options. You can treat inventory as non-incidental materials and supplies, deducting the cost when the goods are used or sold rather than tracking cost layers. Or you can follow whatever inventory method you already use in your financial statements or internal books.5Office of the Law Revision Counsel. 26 USC 471 – General Rule for Inventories The exception, introduced by the Tax Cuts and Jobs Act, removes a significant compliance burden. Many smaller businesses still track inventory formally because lenders and investors expect it, but for tax purposes the detailed valuation methods below become optional.

Valuation Method Sets the Dollar Value

Whatever method produced last year’s ending inventory automatically produces this year’s beginning inventory. The IRS requires consistency, and you cannot switch freely between methods to chase a favorable result.3eCFR. 26 CFR 1.471-2 – Valuation of Inventories Understanding what method you are on tells you why your beginning inventory carries the value it does.

First-In, First-Out

FIFO assumes the oldest units are sold first, so ending inventory reflects the most recent purchases. When prices are rising, FIFO produces a higher ending inventory value, which carries forward as a higher beginning inventory the following year. The trade-off is a lower COGS during inflation, meaning higher reported profit and a larger tax bill.

Last-In, First-Out

LIFO assumes the most recently purchased units are sold first, leaving the oldest and often cheapest inventory on the books. Beginning inventory under LIFO can reflect costs from years or decades ago. In periods of rising prices, LIFO pushes expensive recent purchases into COGS and reduces taxable income. The catch is the LIFO conformity rule: if you use LIFO on the tax return, you must also use it in financial reports to shareholders and creditors.6Internal Revenue Service. LIFO Conformity You cannot show investors a FIFO income statement and file a LIFO return.

Weighted Average Cost

The weighted average method blends all costs together. After each purchase, you divide total cost of goods available by total units to get one average cost per unit. Beginning inventory carries this blended figure, which smooths out price swings and lands between FIFO and LIFO. Businesses dealing with interchangeable goods like fuel, grain, or chemicals tend to use it because tracking individual lots would be impractical.

Lower of Cost or Market

The regulations allow you to value inventory at either cost or the lower of cost or market. Under LCM, you compare each item’s historical cost to its current market replacement price and use whichever is lower. “Market” means the current bid price to buy or reproduce the item on the inventory date.7Internal Revenue Service. LB&I Concept Unit – Lower of Cost or Market LCM matters most when prices drop: widgets bought at $15 but replaceable at $10 can be written down, producing a lower ending inventory that becomes a lower beginning inventory the next year. Subnormal goods (damaged, obsolete, out-of-season) must be valued at their actual selling price minus the direct cost of selling them, and the business must have offered them at that price within 30 days of the inventory date.8eCFR. 26 CFR 1.471-4 – Inventories at Cost or Market, Whichever Is Lower

The Physical Count Anchors the Number

Whether you track inventory perpetually or count only at year-end, the physical count is what ties beginning inventory to reality. Most calendar-year businesses count during the last days of December or the first days of January. The IRS requires businesses to take a physical inventory at reasonable intervals and adjust the books to match the actual count.9Internal Revenue Service. Publication 538 – Accounting Periods and Methods

You can estimate inventory shrinkage and confirm those estimates with a physical count conducted after year-end, provided you count inventory at each location on a regular and consistent basis and adjust both the inventory figures and the estimating methods when actual shrinkage differs from the estimates.5Office of the Law Revision Counsel. 26 USC 471 – General Rule for Inventories You can close the books using an estimate and true it up when the count is complete, but you cannot skip the count.

Consigned Goods and Goods in Transit

Two situations regularly cause beginning inventory to be misstated.

Consigned goods belong to whoever holds title, not whoever holds the goods. If another company’s merchandise is sitting in your warehouse on consignment, it does not belong in your inventory; the consignor keeps it on their books until it sells. If you send your own goods out on consignment, they stay in your inventory until the consignee sells them to an end customer.

Goods in transit on the count date follow the shipping terms. Under FOB shipping point, ownership transfers when goods leave the supplier’s dock, so you include them in inventory even though they have not arrived. Under FOB destination, the supplier owns the goods until they reach you, so you exclude them. Missing this distinction misstates the ending inventory that becomes next year’s opening figure.

UNICAP for Larger Businesses

Businesses that produce goods or acquire them for resale may have to capitalize indirect costs into inventory rather than deducting them right away. Under IRC Section 263A, direct costs like supplier payments and direct labor are joined by a share of indirect costs such as warehouse rent, utilities, insurance, and management overhead tied to producing or acquiring the goods.10Office of the Law Revision Counsel. 26 USC 263A – Capitalization and Inclusion in Inventory Costs of Certain Expenses These costs sit inside inventory values and are not deducted until the goods sell, so they inflate beginning inventory compared to a purchase-cost-only figure.

The same small business exception applies. If your average annual gross receipts over the prior three years do not exceed $32 million for tax years beginning in 2026, you are exempt from UNICAP.4Internal Revenue Service. Rev. Proc. 2025-32

Changing Your Inventory Method

You cannot simply switch from FIFO to weighted average, adopt LIFO, or move to a lower-of-cost-or-market basis on the next return. The IRS requires Form 3115, Application for Change in Accounting Method, filed during the tax year in which the change takes effect.11Internal Revenue Service. 4.11.6 Changes in Accounting Methods

When approved, the IRS computes a Section 481(a) adjustment so income is not counted twice or missed entirely. The adjustment captures the cumulative difference between the old method and the new one. A negative adjustment (income decrease) is generally taken in full in the year of change. A positive adjustment (income increase) spreads over four tax years.11Internal Revenue Service. 4.11.6 Changes in Accounting Methods

For beginning inventory specifically: when you change methods, recalculate last year’s ending inventory as if the new method had always applied. That recalculated figure becomes this year’s beginning inventory, and the difference from the originally reported ending inventory forms the basis of the 481(a) adjustment. Switching methods without approval is one of the fastest ways to trigger an audit adjustment, because a gap between last year’s ending inventory and this year’s beginning inventory is easy for the IRS to spot on the return.