To write change on a check, put the cents in both amount fields: as a two-digit decimal in the small numeric box (for example, $45.50) and as a fraction over 100 on the written line (for example, “Forty-five and 50/100”). The two amounts must match, because banks compare them during processing and a mismatch can trigger a manual review that delays the payment.
Cents in the Numeric Box
In the small box next to the pre-printed dollar sign, write the full dollar figure, a decimal point, and two digits for the cents. One hundred five dollars and fifty cents is “105.50.” Always use two digits after the decimal. Write “.50,” not “.5,” so the amount cannot be misread. Keep the numbers clear and evenly spaced; banks capture this figure with scanning technology, and cramped digits or a faint decimal can get the check pulled for manual review.
Start the number tight against the printed dollar sign. A gap there is exactly the kind of opening a forger uses to insert an extra digit and inflate the amount. The Office of the Comptroller of the Currency warns check writers to avoid leaving blank space in either amount field for this reason.1Office of the Comptroller of the Currency. Check Fraud: A Guide to Avoiding Losses
Cents on the Written Line
On the long line across the middle of the check, spell out the dollar amount in words, write “and,” then write the cents as a fraction over 100. For $105.50, that reads: “One hundred five and 50/100.” The fraction tells the bank how many cents out of a possible hundred you intend to pay.
- $23.45: “Twenty-three and 45/100”
- $1,600.75: “One thousand six hundred and 75/100”
- $8.09: “Eight and 09/100”
Reserve the word “and” for the break between dollars and cents. Write “One hundred five,” not “One hundred and five,” so the bank can tell exactly where the dollar portion ends and the cents begin.
After the fraction, draw a solid horizontal line through any remaining blank space all the way to the pre-printed word “Dollars.” That line keeps anyone from squeezing in extra words or digits later.
Round Dollar Amounts With No Change
A check for an even dollar figure still needs the cents portion filled in on both fields. In the numeric box, add “.00” after the amount, such as “50.00.” Without the decimal and zeroes, a forger could tack digits onto the end.
On the written line, follow the spelled-out amount with either “and 00/100” or “only.” Both are widely accepted. For a fifty-dollar check:
- “Fifty and 00/100”
- “Fifty dollars only”
Then run your line through the leftover space.
Amounts Under One Dollar
For a check under a dollar, say ninety cents, write “.90” or “0.90” in the numeric box; the printed dollar sign already handles the currency. On the written line, write “Zero dollars and 90/100,” or “Only 90/100,” then draw a line through the rest of the space. The goal is to make it unmistakable that no whole-dollar amount is involved, so no one can add digits in front of your figure.
If You Write the Wrong Cents
If the cents portion comes out wrong, the safest fix is to void the check and start over. Write “VOID” in large letters across the front so it cannot be cashed, and keep it for your records. Under the Uniform Commercial Code, any unauthorized change to the amount on a check counts as an alteration, and a bank that sees what looks like a correction may refuse to honor the check.2Cornell Law School Legal Information Institute. UCC 3-407 – Alteration
Some banks will accept a check where the writer has neatly crossed out the mistake, corrected it, and initialed the change, but policies vary. Because there is no guarantee the recipient’s bank will process a corrected check, voiding and rewriting avoids the risk.
Why the Written Amount Beats the Number
If the figure in the numeric box does not match the amount on the written line, the written line controls. The Uniform Commercial Code provides that when an instrument contains contradictory terms, words prevail over numbers.3Cornell Law School Legal Information Institute. UCC 3-114 – Contradictory Terms of Instrument Banks follow this rule on disputed checks because a spelled-out amount is harder to alter convincingly than a digit in a small box. Take extra care with the fraction on the written line; if the two fields disagree, that is the figure the bank will pay.