How to Set Up a Construction Escrow Account: Agreement, Draws, Costs

To set up a construction escrow account, pick a neutral escrow agent, assemble your project documents, negotiate and sign an escrow agreement that spells out the draw schedule and inspection rules, and then deposit funds before any work begins. Once the construction contract is finalized, the setup usually takes one to three weeks. On projects backed by a construction loan, the lender almost always requires the arrangement; on self-funded jobs, the owner and contractor set it up by agreement.

Step 1: Choose Your Escrow Agent

The escrow agent holds the money and controls every disbursement, so this choice shapes how smoothly the rest of the project runs. Your options include title companies, banks with construction lending departments, specialized escrow firms, and real estate attorneys. A lender may require a specific agent or hand you a shortlist. If you’re self-funding, you and the contractor pick the agent together.

Experience with construction draws matters more than general escrow experience. Construction escrows run for months or years and involve multiple disbursements, and agents who only handle standard real estate closings tend to create bottlenecks at every draw. Before committing, ask how many construction escrows the agent has handled in the past year, what their average draw processing time looks like, and whether they coordinate directly with inspectors. Confirm the agent carries a surety bond and errors-and-omissions insurance; both protect your funds if the agent makes a mistake or acts improperly.

Step 2: Gather the Documents the Agent Will Require

The escrow agent won’t open an account until the paperwork is complete. Missing documents are the most common reason setup drags past three weeks, so pull everything together before your first meeting.

  • The fully signed construction contract between owner and contractor, covering scope, timeline, total cost, and payment terms.
  • Project plans and a line-item budget. Architectural or engineering drawings plus a detailed cost breakdown by category (site preparation, foundation, framing, mechanical systems, finishes). The budget becomes the backbone of the draw schedule.
  • The contractor’s current state license and a certificate of insurance showing general liability, workers’ compensation, and commercial auto coverage. The certificate should list the property owner as an additional insured and include a waiver of subrogation endorsement, which prevents the contractor’s insurer from coming after you to recover claim payments.
  • A sworn contractor’s statement. This is a notarized document in which the general contractor lists every subcontractor and supplier on the project, each one’s contract amount, what’s already been paid, and what’s still owed. It is signed under oath and becomes the escrow agent’s roadmap for cutting checks. Each listed subcontractor and supplier also provides a W-9 so the agent can handle tax reporting.
  • If the project is financed, the lender’s construction loan agreement, draw authorization forms, and any lender-specific escrow instructions.

Step 3: Negotiate the Escrow Agreement

The escrow agreement is the binding contract among owner, contractor, and escrow agent that governs how the account operates. Disbursements, inspections, dispute handling, and fees are all set here. Finalize it before any work starts or money changes hands, because changing terms mid-project means amending the agreement and often re-depositing funds.

Draw Schedule

The draw schedule is the payment roadmap built into the agreement. It ties each payment to a specific project milestone rather than a calendar date, so money only moves when work actually gets done. A typical residential project might have five to seven draws aligned with stages like site preparation, foundation, framing, mechanical rough-in, interior finishes, and final completion. Each draw lists the dollar amount or percentage of the total contract that will be released when that milestone is verified.

Getting this right at setup saves real headaches later. Vague milestones lead to arguments about whether “framing” means walls only or walls plus roof sheathing. Overly granular ones trigger a new round of paperwork and inspection fees for every minor task. Aim for milestones specific enough to verify in a single site visit but broad enough to keep the project moving.

Inspection and Approval Requirements

Spell out who verifies completed work before each payment. Most setups use a third-party inspector, though on lender-funded projects the bank may send its own representative. The inspector visits the site, confirms the milestone work matches the plans and budget, and sends a written report to the escrow agent, who forwards it to the owner and lender for sign-off. Money only moves after all required parties approve.

Dispute Resolution

Build in a clear process for when the owner and contractor disagree about whether work meets the standard for payment. A well-drafted agreement typically requires mediation first, with a neutral mediator helping both sides reach a compromise, followed by binding arbitration if mediation fails. During a dispute, the escrow agent holds the contested funds in place until the process resolves. The agent has no authority to decide who’s right. Their role is purely administrative: safeguard the money and release it only when the agreement’s conditions are met or both parties provide joint written instructions.

Default Provision

The agreement should also spell out what triggers a contractor default, the notice period the contractor gets to cure the problem, and the steps for releasing the remaining funds to the owner if the contractor doesn’t cure. Because escrow funds only release against verified work, the unearned balance stays protected if the contractor walks off the job. Without a default clause written into the agreement up front, the agent has no instructions to follow when things go wrong.

Step 4: Open and Fund the Account

Once all parties sign the agreement, the escrow agent opens the account at an FDIC-insured institution. Then comes the initial deposit. On a lender-funded project, the bank typically deposits the full loan amount or the first tranche into escrow at closing. If you’re self-funding, you wire the total contract amount or a substantial first installment, depending on what the agreement specifies.

The account is now active, but no money flows to the contractor until the first milestone is completed and verified. Resist pressure to release a large upfront payment before work begins. A reasonable mobilization draw covering material deposits or permit fees is normal on larger projects, but it should be a small, clearly defined amount written into the draw schedule.

Protections to Build Into the Setup

A few provisions do most of the work in protecting your money, and all of them need to be in the agreement before funding. Adding them later is harder and sometimes impossible.

Lien Waiver Requirements

Lien waivers are the single most important documents the agent will collect, and skipping them is where construction escrow arrangements most commonly fall apart. If a general contractor gets paid through escrow but doesn’t pass the money to a subcontractor or supplier, that unpaid party can file a mechanic’s lien against your property. You could owe money you already paid once, or face a forced sale to satisfy the lien. A lien waiver is a signed document in which a contractor, subcontractor, or supplier confirms payment and gives up the right to file a lien for that amount.

Two types matter. A conditional lien waiver takes effect only after the payment actually clears the bank, and it is the standard waiver exchanged during the project because it protects the signer from giving up rights before holding the money. An unconditional lien waiver takes effect the moment it is signed regardless of whether payment has cleared, so it should only be signed after the signer has verified the funds are in their account. Write into the escrow agreement that the agent will collect conditional waivers from every subcontractor and supplier with each draw request, then collect unconditional waivers confirming the previous draw’s payments actually went through. At final draw, the agent should collect unconditional final lien waivers from everyone who worked on or supplied materials to the project.

Paying subcontractors directly through escrow is one of the strongest protections against mechanic’s liens, because it eliminates the risk of the general contractor pocketing the money. If you want this structure, state it explicitly in the agreement.

Retainage

Most construction escrow agreements include a retainage provision, where 5% to 10% of each progress payment is held back in the escrow account until the project is fully complete. Retainage gives the owner leverage to make sure the contractor finishes punch-list items and corrects defects rather than moving on to the next job. A growing number of states have capped retainage at 5% on private construction projects, so check what your state allows before finalizing the agreement. Retained funds release after final inspection, the owner’s acceptance of the completed work, and collection of final lien waivers.

Change Order and Contingency Terms

Almost every construction project involves changes after the original contract is signed, whether that is upgrading materials, adding a room, or dealing with unexpected site conditions like bad soil. The escrow agreement should require a written change order signed by owner and contractor before any extra work begins, specifying the new scope, cost impact, and schedule adjustment. If a change increases the total project cost, the owner or lender needs to deposit additional funds into escrow to cover it; the agent cannot disburse more than what is in the account.

To keep minor changes from triggering a separate funding event every time, build a contingency reserve into the initial deposit, typically 10% to 15% of the original contract amount. Write how that reserve may be tapped into the agreement so the agent has clear authority.

Setup and Operating Costs to Budget For

Construction escrow is not free, and the fees stack up over a multi-month project. Negotiate them before signing the agreement, not after, and clarify in writing whether fees come out of escrow funds or are billed separately. Deducting fees from escrow reduces the money available for construction.

  • Account setup fee. A one-time charge to open the escrow, review documents, and establish the account. Typically a flat fee ranging from roughly $1,000 to $2,500, though it varies by agent and project size.
  • Per-draw processing fees. The agent charges a fee each time it processes a disbursement, often a flat amount per draw plus a small percentage. With five to seven draws on a typical residential project, these add up.
  • Inspection fees. Each pre-draw site inspection runs roughly $75 to $150 for residential projects and $250 to $350 for commercial work. Specify in the agreement who pays: owner, contractor, or split.
  • Wire transfer fees. If disbursements go out by wire rather than check, expect a small fee per transfer.

Some agents offer a flat annual or project fee that bundles everything, which can be cheaper on projects with many draws. Ask.

Before You Sign

Read the escrow agreement line by line against your construction contract and, if the project is financed, your loan documents. The three have to agree on scope, total cost, the draw milestones, and the inspection process. Conflicts between them surface at the worst possible moment, usually when a draw request is pending and the contractor is waiting on money. Once the three documents line up and the account is funded, construction can start.