To prepare a ledger account, open one page for every account named in your journal, transfer each journal entry onto the correct side (debit or credit) of the affected pages, keep a running balance as you go, and at the end of the period total both sides and carry the difference down as the closing balance. Learning how to prepare a ledger account well is mostly a matter of doing the same short sequence of steps consistently, transaction after transaction, with a system for catching mistakes before they compound.
What You Need Before You Start
Your starting point is the general journal, the chronological record of every transaction the business has entered so far. Each journal entry names at least two accounts (one debited, one credited) along with a date, dollar amount, and brief description. If the transactions haven’t been journalized yet, the ledger has nothing to receive.
You also need a chart of accounts: a numbered list of every account the business uses. A common convention assigns 100–199 to assets, 200–299 to liabilities, 300–399 to equity, 400–499 to revenue, and 500–599 to expenses. Larger businesses stretch these into four- or five-digit codes with sub-ranges, but the logic is the same. The chart is your index; every ledger page ties back to it.
Keep the supporting documents accessible too: invoices, receipts, bank statements, and contracts. Federal law requires every taxpayer to maintain records sufficient to support items reported on a tax return, and the IRS expects those records to be available for inspection at any time.1Office of the Law Revision Counsel. 26 U.S.C. 6001 – Notice or Regulations Requiring Records, Statements, and Special Returns IRS Publication 583 puts it plainly: good records are needed to prepare returns, and a complete set will speed up any examination.2Internal Revenue Service. Publication 583 (12/2024), Starting a Business and Keeping Records
Setting Up the Ledger Pages
Read through the journal for the period and list every unique account name. Each of those names gets its own ledger page. If your journal touches Cash, Accounts Receivable, Sales Revenue, Rent Expense, and Office Supplies, you need five pages. Miss one and that account’s activity has nowhere to land during posting.
Arrange the pages in chart-of-accounts order: assets, then liabilities, equity, revenue, and expenses. That sequence mirrors how the balances will later appear on the balance sheet and income statement, and it makes locating a page fast while you’re mid-posting. The medium doesn’t matter — software, spreadsheet, or bound book — as long as the sequence follows the chart.
At the top of each page, write the account name and its chart-of-accounts number. Below the header, work with a standard set of columns:
- Date — the transaction date, pulled from the journal.
- Particulars — the name of the other account involved. Posting a debit to Cash that came from a credit to Sales Revenue? On the Cash page, particulars reads “Sales Revenue.”
- Folio — the journal page number where the original entry lives. This cross-reference is your audit trail.
- Debit — the left-hand amount column, used when the journal entry debits this account.
- Credit — the right-hand amount column, used when the journal entry credits this account.
- Balance — a running total updated after every line, so you can see the account’s position at a glance.
This running-balance layout (sometimes called the three-column format) is the practical choice for day-to-day bookkeeping. The T-account format from textbooks splits the page into just two sides without a running balance; it’s useful for learning and for quick analysis, but it forces you to total the columns manually to see where the account stands.
How to Post Transactions
Posting is mechanical once the pattern is clear. Work through the journal one entry at a time, starting with the oldest unposted entry.
- Find the ledger page for the first account named in the journal entry and open it.
- Write the transaction date into the date column.
- Enter the amount on the correct side. If the journal debits this account, the amount goes in the debit column. If it credits this account, the amount goes in the credit column.
- Fill in the particulars with the name of the other account involved, so you can identify the transaction later without flipping back to the journal.
- Cross-reference both ways: write the journal page number in the ledger’s folio column, then go back to the journal and write the ledger page number in the journal’s folio column. That two-way link is how you prove every entry was posted.
- Update the running balance. Add debits or subtract credits (or vice versa, depending on the account type) to calculate the new balance.
- Repeat for the other account in the entry, and for any additional accounts if the entry has more than two lines.
Mark each journal entry as posted once every side is in the ledger. The mark can be a checkmark, the ledger page number, or any signal that works for you, but the point is to prevent posting the same entry twice or skipping one entirely. Double-posting inflates the numbers; skipping leaves them incomplete. Either mistake surfaces later as an imbalance, and tracking it down takes far longer than getting it right the first time.
How Often to Post
There’s no single correct frequency. Some businesses post each transaction the moment it’s journalized. Others batch daily, weekly, or monthly. The right interval depends on transaction volume and how current the balances need to be. A retail business processing dozens of transactions a day benefits from daily posting. A small consulting firm with a handful of invoices a month can post weekly or even monthly without losing control. The only wrong answer is waiting so long that errors become hard to trace.
Knowing the Normal Balance for Each Account Type
Before you balance anything, know what a correct balance looks like for each account type. Every category has a normal balance, meaning the side where increases are recorded and where the balance should naturally sit:
- Assets — normal debit balance. Cash, equipment, and receivables should show a debit balance.
- Liabilities — normal credit balance. Accounts Payable, loans, and accrued obligations sit on the credit side.
- Equity — normal credit balance. Owner’s equity and retained earnings are credit-balance accounts.
- Revenue — normal credit balance. Sales and service income increase on the credit side.
- Expenses — normal debit balance. Rent, wages, and utilities increase with debits.
- Dividends or owner’s draws — normal debit balance. These reduce equity and behave like expense accounts.
If an account lands on the wrong side, that’s a red flag. A credit balance in Cash might be a legitimate overdraft, or it might be a posting error. Checking normal balances as you go catches those mistakes early.
Balancing the Account at Period End
Balancing happens at the end of a period, whether monthly, quarterly, or annually, and produces the single figure that represents each account’s net position. The steps:
- Total each side separately. Add every entry in the debit column, then every entry in the credit column.
- Find the difference. Subtract the smaller total from the larger total. The result is the account’s balance, and it falls on whichever side had the larger total.
- Record the balancing figure on the side with the smaller total, labeled “Balance c/d” (carried down). Now both columns add to the same grand total.
- Bring the balance forward. On the first line of the new period, enter the same figure on the opposite side, labeled “Balance b/d” (brought down). That becomes the opening balance for the new period.
An asset account with $12,000 in total debits and $4,500 in total credits has a $7,500 debit balance. Write $7,500 on the credit side as “Balance c/d,” rule off the columns, and enter $7,500 on the debit side of the new period as “Balance b/d.” The account is balanced and ready for new entries.
Rolling Balances Into the Trial Balance
Once every account is balanced, pull each closing balance into a two-column list called the trial balance. Every debit balance goes in one column, every credit balance in the other. If posting and arithmetic were accurate, total debits equal total credits. That equality doesn’t guarantee perfection, because certain errors hide from the trial balance, but an imbalance guarantees something went wrong.
This first version is the unadjusted trial balance because it reflects only what has been journalized and posted so far. Adjusting entries come next: depreciation, expired prepaid insurance, accrued but unpaid wages, revenue earned but not yet billed. Each adjustment is journalized and posted to the ledger like any other transaction, and a new adjusted trial balance follows. That adjusted version feeds the income statement and balance sheet. At year end, closing entries clear temporary accounts (revenue, expenses, dividends) into retained earnings or owner’s equity, leaving a post-closing trial balance of only permanent accounts.
Finding Errors When It Doesn’t Balance
An unbalanced trial balance tells you something is wrong, but not where. A few diagnostic tricks narrow the hunt.
Check whether the difference between total debits and total credits divides evenly by 9. If it does, you likely have a transposition error, meaning two digits were swapped, like $540 recorded as $450. The difference ($90) divides by 9. A difference that’s a round power of 10 (like $900 or $9,000) points to a slide error, where a decimal point shifted. These two tests eliminate a lot of wasted searching.
If the difference equals one full transaction amount, you probably forgot to post one side of a journal entry. If it’s exactly half a transaction amount, you may have posted a debit as a credit or vice versa, which shifts the balance by twice the amount on the wrong side.
Some errors never show up in the trial balance. Posting the right amount to the wrong account (say, Office Supplies instead of Office Equipment) still balances, but the individual balances are wrong. So does an error of original entry, where the wrong dollar amount was recorded on both sides. Those errors usually surface during account reconciliation or when a balance looks unreasonable next to prior periods.
Never erase or overwrite a posted error. Make a correcting journal entry that reverses the incorrect entry and records the correct one. That preserves the audit trail and shows what changed and when.
How Long to Keep Your Ledgers
Federal tax law sets minimum retention periods based on the type of return and the circumstances. The general rule is three years from the date you filed. If you underreport gross income by more than 25%, that window extends to six years. Claims involving a loss from worthless securities or bad debt require seven years. Fraudulent returns or returns never filed have no time limit at all.3Internal Revenue Service. How Long Should I Keep Records Businesses with employees must retain employment tax records for at least four years after the tax is due or paid, whichever is later.4Internal Revenue Service. Topic No. 305, Recordkeeping
Digital records need to maintain a clear audit trail linking transaction-level detail to account totals and to the tax return. You also have to retain documentation of the system itself (record formats, field definitions, internal controls) and be able to produce both the records and the hardware or software needed to read them during an examination.5Internal Revenue Service. Requirements for Retaining Machine-Sensible Records Practically, that means you can’t retire old accounting software without first migrating the data into a format you can still open years from now.
Your ledger must also follow whichever accounting method you’ve adopted (cash, accrual, or an approved hybrid), and the method has to clearly reflect income. Section 446 of the Internal Revenue Code requires taxable income to be computed under the method the taxpayer regularly uses in keeping the books.6Office of the Law Revision Counsel. 26 U.S.C. 446 – General Rule for Methods of Accounting The implementing regulation adds that a method consistently applying generally accepted accounting principles in a particular trade or business will ordinarily satisfy that requirement.7eCFR. 26 CFR 1.446-1 – General Rule for Methods of Accounting
Sloppy ledger work can produce bad tax returns. When a tax underpayment results from negligence or careless disregard of the rules, the IRS imposes an accuracy-related penalty equal to 20% of the underpayment.8Office of the Law Revision Counsel. 26 U.S.C. 6662 – Imposition of Accuracy-Related Penalty on Underpayments The penalty attaches to the tax shortfall, not the underlying bookkeeping mistake, but the chain is short: a posting error distorts a balance, the distorted balance flows into the return, the return understates what you owe.