To make a depreciation schedule for tax returns, you gather four numbers for each asset, decide whether a first-year write-off applies, choose the method and convention the tax code requires, and then build a year-by-year table that feeds IRS Form 4562. The table shows how the asset’s cost is recovered over its recovery period, and the same records determine your tax bill when you eventually sell or scrap it.
Gather the Four Numbers for Each Asset
Every depreciation calculation starts with the same inputs:
- Cost basis. The total you paid, including purchase price plus freight, installation, testing, sales tax, and any other cost to get the asset ready for use.1Internal Revenue Service. Publication 551, Basis of Assets
- Placed-in-service date. The date the asset was ready and available for its intended purpose, which is not necessarily the date of purchase or delivery.
- Salvage value. What you expect the asset to be worth when you’re done with it. Many assets are assigned zero; vehicles and heavy machinery often retain some residual value.
- Recovery period. The number of years over which you’ll depreciate the asset. For tax purposes, IRS Publication 946 assigns mandatory recovery periods by asset class. Computers fall into the five-year class; office furniture goes into the seven-year class.2Internal Revenue Service. Publication 946, How To Depreciate Property
A few boundaries at this stage. Land is never depreciable, so if you buy a building and the land beneath it in a single transaction, you must split the purchase price between the two. Allocate based on each component’s fair market value as a fraction of the total; if you can’t pin down fair market values, assessed values from your property tax bill work as a substitute.1Internal Revenue Service. Publication 551, Basis of Assets Vehicles and other “listed property” that lend themselves to personal use require a log substantiating the business-use percentage. Without adequate records, you cannot claim any depreciation or Section 179 deduction on listed property at all.3Internal Revenue Service. Publication 587, Business Use of Your Home
Check Whether You Can Deduct the Full Cost in Year One
Before building a multi-year table, find out whether you need one at all. Two provisions can write off the entire cost of qualifying property in the year it’s placed in service.
Section 179 Expensing
Section 179 lets you deduct the full purchase price of qualifying equipment, software, and certain improvements in the year you buy them. The base statutory limit is $2,500,000 per year, with a phase-out that begins when total qualifying purchases exceed $4,000,000. Both thresholds are adjusted annually for inflation starting in 2026, bringing the deduction limit to $2,560,000 and the phase-out threshold to $4,090,000 for the 2026 tax year.4Office of the Law Revision Counsel. 26 USC 179 – Election to Expense Certain Depreciable Business Assets The deduction cannot exceed your taxable income from active business operations for the year, though unused amounts carry forward.
100% Bonus Depreciation
For qualified property acquired after January 19, 2025, federal law now provides a permanent 100% first-year depreciation deduction. It applies to new and used tangible property with a MACRS recovery period of 20 years or less, provided the used property wasn’t previously owned by you or acquired from a related party.5Internal Revenue Service. Treasury, IRS Issue Guidance on the Additional First Year Depreciation Deduction Amended as Part of the One, Big, Beautiful Bill Bonus depreciation has no dollar cap and can create or increase a net operating loss. Taxpayers can elect to claim only 40% (or 60% for property with longer production periods) instead of the full 100% for property placed in service during the first tax year ending after January 19, 2025.
If either provision covers your purchase completely, the “schedule” is a single line: the full cost deducted in year one. When neither applies, or when you’re depreciating for book purposes rather than tax, work through the rest.
Choose a Depreciation Method
The method controls how fast the deductions arrive. For financial reporting you have flexibility; for federal tax the IRS narrows the options.
Straight-Line
The simplest approach. Subtract salvage value from the adjusted basis, divide by the number of years in the useful life, and deduct the same amount every year.2Internal Revenue Service. Publication 946, How To Depreciate Property Predictable, and required under the Alternative Depreciation System.
Double Declining Balance
An accelerated method that front-loads deductions. Take twice the straight-line rate and apply it to the asset’s remaining book value each year. A five-year asset has a straight-line rate of 20%, so the double declining rate is 40%. Because the percentage applies to a shrinking balance, the dollar amount drops each year. Depreciation stops once book value reaches salvage.
MACRS for Federal Tax Returns
Most business property on a federal return must use the Modified Accelerated Cost Recovery System. MACRS assigns each asset to a property class with a fixed recovery period and uses predetermined percentages published in IRS tables, so you don’t build formulas from scratch.6Office of the Law Revision Counsel. 26 USC 168 – Accelerated Cost Recovery System Common classes:
- 5-year property: computers, office machines, automobiles, research equipment
- 7-year property: office furniture and fixtures, railroad track, and property without a designated class life
- 27.5-year property: residential rental buildings
- 39-year property: nonresidential commercial buildings
Within MACRS, most taxpayers default to the General Depreciation System (GDS), which uses 200% or 150% declining balance depending on property class. The Alternative Depreciation System (ADS) uses straight-line over longer recovery periods and is required for certain property, including assets used predominantly outside the United States, tax-exempt use property, tax-exempt bond-financed property, and listed property where business use falls to 50% or less.2Internal Revenue Service. Publication 946, How To Depreciate Property Real property trades or businesses that elect out of the Section 163(j) business interest limitation must also use ADS for their real property. Once you pick GDS or ADS for an asset, you stay with that choice for the entire recovery period.
Intangibles acquired as part of a business purchase, such as patents, goodwill, and customer lists, don’t use MACRS. They’re amortized straight-line over 15 years, starting in the month of acquisition.7Office of the Law Revision Counsel. 26 USC 197 – Amortization of Goodwill and Certain Other Intangibles
Apply the Correct Averaging Convention
MACRS doesn’t let you take a full year of depreciation in the year you buy or retire an asset. Conventions determine how much of the first and last year you can claim, and getting this wrong throws off every number in the schedule.
Half-Year
The default for most personal property (equipment, vehicles, furniture). No matter when in the year the asset was placed in service, it’s treated as though use began at the midpoint. You get half a year in year one and half a year in the final year, so a five-year asset actually shows depreciation across six tax years.2Internal Revenue Service. Publication 946, How To Depreciate Property
Mid-Quarter
If more than 40% of the total cost of personal property placed in service during the year was placed in service during the last three months, you must use the mid-quarter convention. Each asset is treated as placed in service at the midpoint of its actual quarter.8eCFR. 26 CFR 1.168(d)-1 – Applicable Conventions, Half-Year and Mid-Quarter Conventions When running the 40% test, exclude real property and any assets placed in service and disposed of in the same year.
Mid-Month
Residential rental property, nonresidential real property, and railroad gradings or tunnel bores always use the mid-month convention. The asset is treated as placed in service at the midpoint of the month it actually entered use.2Internal Revenue Service. Publication 946, How To Depreciate Property
Calculate the Annual Expense
Straight-Line Example
A $10,000 asset with $2,000 salvage value and a five-year useful life. Subtract salvage to get an $8,000 depreciable base. Divide by five, and annual depreciation is $1,600.2Internal Revenue Service. Publication 946, How To Depreciate Property If the asset was in service only part of the first year, prorate for the months in use.
Double Declining Balance Example
Same $10,000 asset, five-year life. The rate is 40% (twice the 20% straight-line rate). Year one: 40% of $10,000 is $4,000, dropping book value to $6,000. Year two: 40% of $6,000 is $2,400, book value $3,600. Year three: $1,440. Stop once book value reaches $2,000, the salvage figure. Practitioners typically switch to straight-line partway through when the straight-line amount on the remaining balance exceeds the declining amount. The MACRS GDS tables handle that switch automatically.
Using the MACRS Percentage Tables
For tax returns you don’t calculate declining balance rates by hand. Publication 946 contains percentage tables for each combination of property class and convention. Multiply the asset’s cost basis by the published percentage for each year. No salvage value is subtracted under MACRS because the tables are designed to recover the full cost. Look up the property class, identify the convention, and read the percentages straight from the table.
Watch the Passenger Vehicle Caps
Passenger automobiles used in business are subject to annual dollar limits that override normal MACRS calculations. Adjusted for inflation each year, the caps prevent outsized deductions on luxury vehicles. For vehicles placed in service in 2026:9Internal Revenue Service. Rev. Proc. 2026-15, Depreciation Limitations for Passenger Automobiles
With 100% bonus depreciation applied:
- Year 1: $20,300
- Year 2: $19,800
- Year 3: $11,900
- Each year after: $7,160
Without bonus depreciation:
- Year 1: $12,300
- Year 2: $19,800
- Year 3: $11,900
- Each year after: $7,160
If the vehicle costs more than the caps can recover in the standard period, you continue claiming $7,160 per year until the business-use portion of the cost is fully recovered. Heavy SUVs and trucks with a gross vehicle weight rating above 6,000 pounds are exempt from these limits, which is the “6,000-pound rule.”
Build the Year-by-Year Table
With the method, convention, and annual expense settled, the schedule is a table with five columns:
- Year: the tax year or accounting period
- Beginning book value: the asset’s value on your books at the start of the year
- Depreciation expense: the deduction for that year
- Accumulated depreciation: running total since the asset was placed in service
- Ending book value: beginning book value minus the current year’s expense
Each row flows into the next. The ending book value for year one becomes the beginning book value for year two. Continue until ending book value reaches the salvage amount, or zero under MACRS. Accumulated depreciation should never exceed the original cost basis minus salvage value. This table feeds directly into IRS Form 4562, the form used to report depreciation and amortization on your return.10Internal Revenue Service. Instructions for Form 4562, Depreciation and Amortization
Plan for Sale or Disposition
The schedule doesn’t only affect the years you hold the asset. It also determines the tax when you get rid of it. Sell a depreciable business asset for more than its current book value, and the difference between the sale price and the adjusted basis is a gain. The portion of that gain attributable to depreciation you previously deducted is “recaptured” and taxed as ordinary income rather than at the lower capital gains rate.11Office of the Law Revision Counsel. 26 USC 1245 – Gain From Dispositions of Certain Depreciable Property
The math in practice: you bought equipment for $50,000, claimed $30,000 in depreciation, and sold it for $35,000. Adjusted basis is $20,000 ($50,000 minus $30,000 in accumulated depreciation). The $15,000 gain ($35,000 minus $20,000) is all recaptured depreciation taxed at ordinary income rates. That’s why accurate schedules matter long after the asset is fully depreciated. Report the transaction on IRS Form 4797, which handles the sale or disposition of business property and calculates the recapture amount.12Internal Revenue Service. About Form 4797, Sales of Business Property
How Long to Keep the Records
Keep records for any depreciable asset until the statute of limitations expires for the tax year in which you dispose of that asset. For most taxpayers that means at least three years after filing the return that reports the sale or retirement.13Internal Revenue Service. How Long Should I Keep Records In practice, hold the purchase documentation, the depreciation schedule, and records of any improvements for the entire time you own the asset, plus three years after you report disposing of it.