How to Interpret Debt-to-Equity Ratio by Industry

The debt to equity ratio by industry varies far more than most people expect: software companies typically run below 15%, while utilities, REITs, and airlines routinely sit above 75%. That spread isn’t a sign that some industries are reckless and others cautious. It reflects what each sector finances, how predictable its revenue is, and what lenders are willing to extend credit against. A ratio only tells you something useful once you know the sector’s normal range.

The calculation itself is straightforward. You divide a company’s total debt by its total shareholders’ equity, both pulled directly from the balance sheet. Some analysts use total liabilities in the numerator rather than just interest-bearing debt, which produces a higher number because it pulls in accounts payable and accrued expenses alongside loans and bonds. Either version works, as long as you stay consistent when comparing one company to another.

What the Number Actually Means

A ratio of 1.0 means a company has one dollar of debt for every dollar of equity. Below 1.0, equity is doing more of the funding work. Above 1.0, debt is. A ratio of 2.5 means $2.50 of debt for every $1.00 of equity.

Leverage amplifies results in both directions. When a company earns more on borrowed capital than it pays in interest, the surplus flows to equity holders and lifts return on equity. When earnings fall below the cost of that debt, shareholders absorb the loss while interest payments still come due. That tradeoff is the reason a high ratio isn’t automatically bad and a low one isn’t automatically good. Whether a given number is healthy depends almost entirely on what the business does for a living.

Industry Benchmarks

The figures below reflect market debt to equity ratios compiled from U.S. public companies as of January 2026.

Utilities and Energy

Regulated utilities sit near the top of the leverage range. General utilities averaged about 76%, and adjusting for lease obligations pushed that to roughly 81%. Water utilities came in a little lower at around 62%.1NYU Stern: Debt Fundamentals. Debt Fundamentals by Sector (US) These levels suit the business. Utilities invest billions in power plants, transmission lines, and pipelines that produce regulated cash flows for decades, and lenders are comfortable extending long-dated credit against that kind of revenue stream.

Banking and Financial Services

Banks are a category on their own. Money center banks showed a ratio of roughly 164%, while regional banks averaged about 51%.1NYU Stern: Debt Fundamentals. Debt Fundamentals by Sector (US) The reason money center banks look so leveraged is structural: customer deposits sit on the balance sheet as liabilities. A bank isn’t borrowing the way a manufacturer borrows when it issues bonds; it’s taking in deposits and lending them out at a spread, which is the whole business model. Because of that built-in leverage, regulators use capital requirements rather than the debt to equity ratio to judge safety. Under Basel III, banks must maintain a minimum Tier 1 leverage ratio of 3%, meaning at least $3 of high-quality capital for every $100 of total exposure.2Bank for International Settlements. Basel III Leverage Ratio Framework and Disclosure Requirements Reading a bank’s debt to equity ratio the way you’d read an industrial company’s will mislead you every time.

Technology and Software

Software companies sit at the opposite end. System and application software firms showed a ratio of just 5.67%, and internet software companies averaged about 13.74%.3NYU Stern. Debt Ratios and Fundamentals by Industry These businesses don’t need to finance factories or pipelines. Their main assets are code, talent, and intellectual property, none of which require the heavy upfront capital that pushes other sectors toward borrowing. When a software company suddenly takes on meaningful debt, it usually signals an acquisition strategy rather than normal operations, and that shift is worth looking into.

Real Estate and REITs

Real estate is a leveraged business by nature. REITs averaged roughly 86%, and real estate development firms ran higher at about 101%.3NYU Stern. Debt Ratios and Fundamentals by Industry Property produces reasonably predictable rental income, and the buildings themselves serve as collateral, so lenders will finance a large portion of each asset’s value. Real estate operations and services firms, which are more fee-based and hold fewer hard assets, averaged a much lower 25%. The type of real estate activity matters as much as the fact that it’s real estate.

Healthcare

Healthcare spans a wide range. Pharmaceutical companies showed a ratio of about 14%, closer to technology, because so much of their value lives in patents and research pipelines. Hospitals and healthcare facilities averaged around 58%, reflecting the cost of buildings, specialized equipment, and continuous capital spending.3NYU Stern. Debt Ratios and Fundamentals by Industry Lumping all healthcare together and expecting a single norm misses the fundamental gap between a biotech running on equity and a hospital system financing a new wing.

Airlines and Transportation

Airlines carried a ratio of about 88%, driven by the cost of aircraft fleets and the industry’s history of financing them with debt or leases. Railroads, built on long-lived infrastructure, came in around 27%, and trucking companies averaged about 26%.3NYU Stern. Debt Ratios and Fundamentals by Industry An airline at 88% leverage is operating within its sector’s norms. A trucking company at 88% would be a clear outlier worth investigating.

How to Use These Numbers

Three comparisons do most of the work, applied in order. First, compare the company to its direct competitors in the same industry. A ratio noticeably above the sector median suggests either a more aggressive growth plan or a weaker financial position, and profitability and cash flow will tell you which. Second, track the company’s own ratio over time. A gradual drift upward may reflect deliberate capital structure choices; a sudden jump deserves investigation. Third, check the ratio against any covenant thresholds disclosed in the financial statements, since a company creeping toward a covenant ceiling has less room to maneuver than the headline number suggests.

The ratio is weakest as a standalone screen. Filtering out every company above an arbitrary cutoff eliminates well-run businesses in capital-intensive sectors and gives false comfort about heavily leveraged companies in low-debt industries. A utility at 80% and a software company at 80% are in completely different situations.

Things That Distort the Comparison

Before comparing two companies’ ratios, check that the underlying balance sheets are built the same way. A few common issues can throw the number off.

Operating Leases After ASC 842

Before 2019, most operating leases lived off the balance sheet. A retailer leasing hundreds of locations would show neither an asset nor a liability for those commitments. Under ASC 842, which took effect for public companies, lessees now record a right-of-use asset and a corresponding lease liability for virtually all leases.4DART – Deloitte Accounting Research Tool. 7.6 Leases Debt to equity ratios rose across lease-heavy industries as a result, not because the underlying risk changed, but because the rules started capturing obligations that were always there. Comparing a current ratio to the same company’s pre-2019 figure without adjusting will overstate the increase in leverage.

Preferred Stock Classification

Preferred stock usually sits in equity, but not always. Under ASC 480, preferred shares the company is required to redeem at a specified date or on an event certain to occur must be classified as liabilities instead.5SEC. Mandatorily Redeemable Preferred Units A company with a large issuance of mandatorily redeemable preferred will show a higher ratio than an otherwise identical company whose preferred shares are perpetual. If one of the companies you’re comparing has preferred stock outstanding, check how it’s classified before reading too much into the gap.

Intangible Assets and Goodwill

Standard shareholders’ equity includes intangibles like goodwill, patents, and trademarks. In a liquidation, those assets are often worth far less than their book value. Some analysts prefer the debt to tangible net worth ratio, which strips intangibles out of the denominator and produces a more conservative figure. The gap between the two ratios can be large for companies that grew through acquisitions, where goodwill from past deals inflates the equity balance.

GAAP Versus IFRS

Companies reporting under U.S. GAAP and those reporting under IFRS organize their balance sheets differently and can treat certain items differently. GAAP lists assets in order of liquidity starting with the most liquid; IFRS reverses the order. More substantively, the two frameworks can diverge on how specific liabilities and equity instruments are classified. Verify you’re comparing like with like before putting a U.S. company’s ratio next to a foreign peer’s.

When Equity Goes Negative

A negative debt to equity ratio appears when shareholders’ equity drops below zero, which makes the standard calculation meaningless. The reflex reading is distress, and sometimes that’s correct: a business that has absorbed years of operating losses can wipe out its equity entirely, leaving creditors as the only real stakeholders.

But some highly profitable companies carry negative equity on purpose. Aggressive share repurchase programs are the usual explanation. Buybacks create treasury stock, a contra-equity account that directly reduces total shareholders’ equity, and a company that has spent heavily on buybacks for years can push equity negative while still generating strong cash flows. In that case, the negative figure reflects capital allocation, not operational trouble.

Either way, negative equity carries practical consequences. State corporate law generally restricts dividend payments when equity has been depleted. Under Delaware law, for example, dividends may not be declared out of net profits when the capital of the corporation has been diminished below the aggregate amount represented by preferred stock.6SEC. Response to Congress Negative Net Equity Issuance Companies in that position have to fund shareholder returns through other means, and boards face heightened scrutiny around distribution decisions.