The ACORD 23 certificate of insurance is the standardized one-page form that proves a specific leased or financed vehicle or piece of equipment carries the liability and physical damage coverage the lessor requires. You cannot download it yourself: ACORD forms are copyrighted, and your insurance agent or broker generates them through a licensed agency management system. Your job is to give the broker the right information so the certificate matches the lease on the first try.1New York State Department of Financial Services. ACORD 23 Certificate of Insurance
What to Gather Before You Call Your Broker
The fastest path to a clean certificate is handing your broker the lease’s insurance requirements page and letting them build to that checklist. Before you make the request, pull together:
- The lease or finance agreement showing required coverage types, limits, deductibles, and valuation method.
- The lessor’s full legal name and mailing address exactly as they want it in the certificate holder box.
- The asset’s VIN or serial number, year, make, model, and body type.
- The designation the lessor requires: loss payee, lender’s loss payable, additional insured, or a combination.
- Any cancellation notice endorsement the lease demands.
Some lessors provide their own pre-printed certificate request form specifying coverage limits and designations. Bring that too.
Working Through the Form Section by Section
Your broker enters the data, but knowing what each section asks lets you supply the right details and catch errors before the certificate reaches the lessor.
Identification
The top of the form captures the preparation date, the producer (your agency’s name, address, phone, fax, and email), and the insured (the full legal name and mailing address of the business leasing the asset). The insured name must match the lease exactly. A mismatch, even “LLC” versus “Inc.,” is one of the most common reasons a lessor rejects a certificate.2HawkSoft User Group. ACORD 23 Instructions
Insurers Affording Coverage
Up to five insurance companies can be listed, each with its full legal name and five-digit NAIC code. The NAIC number lets the lessor look up the insurer’s licensing and financial standing.3HL7 Terminology. National Association of Insurance Commissioners (NAIC) Company Codes Each insurer is assigned a letter A through E that is referenced later in the coverages section.
Description of the Vehicle or Equipment
Enter the year, make, manufacturer, model, and body type. For automobiles, the seventeen-character VIN goes in the identification field. For heavy equipment or machinery without a VIN, use the manufacturer’s serial number.1New York State Department of Financial Services. ACORD 23 Certificate of Insurance There is also a field for the asset’s value. Check every digit against the lease and the title documentation. A transposed digit can void the certificate’s usefulness during a claim.
Coverages
This is the core of the form, split into two areas. Auto liability protects against third-party bodily injury and property damage claims from operating the vehicle. Limits can appear as a combined single limit or as split limits (per-person bodily injury, per-accident bodily injury, and property damage). Check the liability box, enter the policy number, and fill in effective and expiration dates that span the full lease term.2HawkSoft User Group. ACORD 23 Instructions
Physical damage covers the asset itself, separated into collision (impact with another object) and “other” (theft, fire, vandalism, weather). Enter the limit and deductible for each. The dollar figures come from the lease, not from the form, so review the lease’s minimum requirements before your broker fills in the numbers.
Valuation Method
Four checkboxes govern how a total loss would be valued:
- Actual Cash Value (ACV): replacement cost minus depreciation for age and wear. Common as a default, but an older asset will pay out well below the cost of a new replacement.
- Replacement Cost: the cost of a comparable new item with no depreciation deducted.
- Agreed Amount: a specific dollar value you and the insurer set when the policy was written, often used for specialty equipment.
- Stated Amount: a maximum payout cap that may or may not reflect market value.
Many leases require replacement cost or agreed amount, because ACV on a depreciated asset may not cover the remaining lease balance. If the lease calls for replacement cost and your policy carries only ACV, you have to upgrade coverage before the certificate can be issued.4Insureon. Actual Cash Value
Loss Payee, Lender’s Loss Payable, or Additional Insured
The bottom of the form defines the lessor’s relationship to your policy, and getting this wrong is a frequent source of rejected certificates. The designations are not interchangeable:
- Loss Payee: the lessor receives the insurance payout, or is named on the check, when their asset suffers physical damage. This is the standard designation for equipment lessors and vehicle lenders.
- Lender’s Loss Payable: a stronger version typically required by banks and finance companies. It gives the lender independent rights under the policy that survive even if you violate a policy condition.
- Additional Insured: extends your liability coverage to defend the lessor if they are sued because of your use of their asset. It does not entitle them to physical damage proceeds.
A lessor who owns the equipment almost always wants loss payee status on the physical damage side and may want additional insured status on the liability side. The form also asks whether a request has been submitted to add the additional interest, or whether the interest has already been added by policy number.5RIS Insurance. Vehicle or Equipment Certificate of Insurance If the endorsement is not actually on the policy yet, marking it as added is a misrepresentation. Confirm with your broker that the endorsement is in place before the certificate goes out.
Cancellation Notice Is Not Automatic
Current ACORD forms state that cancellation notice will be delivered “in accordance with the policy provisions.”6New York State Department of Financial Services. OGC Opinion No. 10-11-16 – Amendment to ACORD Form The certificate itself creates no notification right. If the lease requires thirty or sixty days’ advance notice to the lessor, your broker has to arrange a specific cancellation notice endorsement with the insurer, and it must be formally attached to the policy. Older certificates used “endeavor to” language that imposed no actual obligation, and the current form dropped it.
Agents who write a specific number of notice days on a certificate without a matching endorsement risk fines and license revocation, because the certificate then misrepresents the policy.7IndependentAgent.com. ACORD and Notice of Cancellation Tell your broker about the lease’s notice requirement before the policy is bound, so the endorsement is added at inception rather than retrofitted.
What the Certificate Does Not Do
Every ACORD 23 carries a disclaimer at the top: “This certificate is issued as a matter of information only and confers no rights upon the certificate holder. This certificate does not affirmatively or negatively amend, extend or alter the coverage afforded by the policies below.”8Wellesley College. How to Read and Review Certificates of Insurance The certificate is a snapshot summary. It is not a policy, not a contract, and not required by any statute or regulation. If the certificate says one thing and the underlying policy says another, the policy controls.6New York State Department of Financial Services. OGC Opinion No. 10-11-16 – Amendment to ACORD Form
Holding a certificate does not guarantee the holder will be notified of changes, receive claim proceeds, or have direct rights against the insurer unless the underlying policy endorsements specifically grant those rights. Requesting copies of the relevant endorsements alongside the certificate is the only way to verify the protection is actually there.
Delivery and Turnaround
Once the insurer authorizes the certificate, your broker generates it and typically sends it as a PDF by email. Some lessors still require a mailed hard copy for their permanent records. If your existing policy already meets the lease requirements, many brokers issue the certificate within a business day. If coverage adjustments or endorsements are needed first, expect several business days.
Large lessors and fleet-management companies increasingly use automated certificate-tracking platforms that flag expiring or noncompliant certificates and request renewals directly from the broker. If your lessor uses one, your broker may need to upload the certificate to a specific portal rather than emailing it.
Mistakes That Get Certificates Rejected
Reviewers who read certificates for a living catch these errors instantly:
- Name mismatch between the insured on the certificate and the lessee on the lease.
- A single transposed digit in the VIN or serial number.
- Split limits on the certificate when the lease calls for a combined single limit, or limits that fall below the lease’s per-accident threshold.
- The lessor shown only as certificate holder when the lease requires loss payee status, which grants no claim rights on its own.
- Policy dates that do not span the full lease term, or that have already expired.
- ACV valuation when the lease requires replacement cost, leaving the lessor exposed to the depreciation gap.
Give your broker the lease’s insurance requirements page in writing. Verbal relays are where most of these errors begin.