How to Fill Out and Submit an Insurance Certificate Request Form

An insurance certificate request form is the short internal document you send your agent or broker telling them exactly what to put on a Certificate of Insurance (COI) before they issue it to the party asking for proof of your coverage. In the United States that certificate is almost always the ACORD 25, a one-page summary of your active policies, limits, and the name of the party requesting proof. Your job on the request side is to give the agent enough detail that the certificate matches your contract or lease on the first try.

Agencies design their own request templates, so there is no single numbered form. Some brokerages hand you a PDF; others run a web portal with dropdowns for coverage lines and a free-text box for project details. The fields all map to the same ACORD 25 the agent will produce at the end.

Pull the Contract Before You Touch the Form

Open the underlying contract, lease, or bid document first. It spells out the coverage types, minimum limits, and endorsements the other side expects. Skipping this is the main reason certificates get rejected: the agent produces what you ask for, and what you asked for does not match what the contract requires.

Collect these details before you start filling anything in:

  • The certificate holder’s full legal name and mailing address, exactly as written in the contract. Abbreviations, trade names, or a DBA that doesn’t line up with the contracting entity is a common reason certificates get kicked back.
  • A contact person or department at the certificate holder who handles compliance verification.
  • Your current policy numbers for every line the contract requires: commercial general liability, automobile liability, umbrella or excess, workers’ compensation, and professional liability if it applies.
  • The minimum per-occurrence and aggregate limits the contract demands. A $1 million per-occurrence and $2 million aggregate general liability requirement is common in commercial work, but read the contract; some projects and landlords ask for higher.
  • The specific endorsements the contract names, with their exact wording. Additional insured, waiver of subrogation, and primary-and-noncontributory language are the three that show up most often.
  • The project or job description and the location where the work will be performed.

For workers’ compensation, also pull the NCCI class codes (or the state equivalent) that match the labor your employees perform. These appear on the policy’s declarations page and feed into how the certificate verifies statutory compliance.

Check Whether Any Policy Is Claims-Made

Professional liability in particular is often written on a claims-made basis rather than occurrence. The ACORD 25 has a checkbox for each. An occurrence policy covers incidents that happen during the policy period no matter when the claim is filed. A claims-made policy only responds when both the incident and the claim fall inside the active policy dates. If yours is claims-made, confirm the retroactive date predates your work for the requesting party, or prior work can end up uninsured.

Completing the Request

Policyholder and Producer Information

Enter your business’s full legal name as it appears on the policy. The agent fills in the “Producer” block with their agency details and the insurer names and NAIC numbers, so you usually do not supply those. If you’re using an online portal, double-check that it is pulling the current policy year. Selecting last year’s expired policy is an easy mistake on systems that default to the most recent renewal.

Coverage Lines and Limits

The ACORD 25 has dedicated rows for commercial general liability, automobile liability, umbrella or excess liability, and workers’ compensation and employers’ liability. Mark the lines you need shown, and confirm the limits meet or exceed the contract minimums. If a primary policy limit falls short but an umbrella brings the total above the threshold, say so on the request. The agent can display the umbrella on the certificate to show compliance.

Description of Operations

The ACORD 25 has a free-text block labeled “Description of Operations / Locations / Vehicles.” This is where the project name, job-site address, and any special endorsement language land on the final certificate. On your request form, write a brief description of the work and reference the contract or project by name. This is also where agents note that the certificate holder has been added as an additional insured or that a waiver of subrogation applies, so flag those clearly in the request to make sure the language reaches the finished document.

Call Out the Endorsements by Name

Most commercial agreements require one or more endorsements that modify your policy to protect the certificate holder. This is where the most things go wrong, because the agent has to actually add the endorsement to your policy, not just mention it on the certificate.

Additional Insured

An additional insured endorsement extends your general liability coverage to the certificate holder for claims arising out of your work. The most widely used version is the CG 20 10, which covers the additional insured for bodily injury, property damage, and personal or advertising injury caused by your ongoing operations at a designated location. It does not cover the additional insured for their own negligence, and coverage ends once your work at the project location is complete.

Specify the endorsement form number on the request (CG 20 10, CG 20 37, or whatever the contract names) along with its edition date. Different editions of the same form carry different coverage scopes, and the wrong one can leave the certificate holder with less protection than the contract intended.

Waiver of Subrogation

A waiver of subrogation tells your insurer it cannot sue the certificate holder to recover money it paid on your claim, even if the certificate holder was partly responsible for the loss. Construction contracts, commercial leases, and joint ventures commonly require it. On the request, say whether you need a blanket waiver covering all parties or a scheduled waiver naming only the certificate holder.

Primary and Noncontributory

When a contract requires primary-and-noncontributory language, your policy must respond first to a covered loss and must not seek contribution from the certificate holder’s own insurance. Note the requirement on the request so the agent can confirm the endorsement is on the policy and reference it in the Description of Operations field.

Submitting the Request

Most brokerages take requests through a secure online portal, a dedicated service email address, or a client management platform. Uploading through a portal usually triggers an automatic notification to your account manager and creates a time-stamped record you can point to later. If your agent accepts emailed forms, send the completed request as a PDF attachment rather than pasting information into the email body. It cuts transcription errors and gives the agent a single document to work from.

Processing Time

A straightforward request, where the endorsements are already on the policy and the agent just needs to generate the document, is typically turned around within twenty-four hours. Requests that require adding new endorsements take longer, because the carrier has to approve the change before the agent can reflect it on the certificate. If a project start date is approaching, submit several business days early.

Review the Certificate When It Arrives

The completed ACORD 25 is usually delivered as a PDF to you and the certificate holder at the same time. Audit it against your original request and the contract:

  • Does the certificate holder’s legal name match the contract exactly?
  • Are the per-occurrence and aggregate limits at or above the contract minimums on every required line?
  • Does the Description of Operations field reference additional insured status, waiver of subrogation, and primary-and-noncontributory language as required?
  • Do the effective and expiration dates cover the full duration of the contract or project?
  • If any policy is claims-made, is the retroactive date early enough to cover prior work?

Catch problems before the certificate reaches the compliance reviewer on the other end. A certificate with a mismatched name or missing endorsement language will get bounced back, and the second round always takes longer than the first.

Cancellation Notice

The ACORD 25 includes a standard cancellation provision stating that if a policy is cancelled before expiration, notice will be delivered in accordance with the policy provisions. That language follows whatever notice terms are already built into the policy; it does not independently guarantee advance warning to the certificate holder. If the contract requires a specific notice period, often thirty days, the agent may need to add a cancellation notice endorsement and reference it on the certificate. Don’t assume the standard language satisfies the contract without checking.

What the Certificate Does Not Do

Every ACORD 25 prints a disclaimer across the top stating the certificate is issued as a matter of information only, confers no rights on the certificate holder, and does not amend, extend, or alter the coverage in the underlying policies. That is not boilerplate to ignore. If a claim arises, the insurer pays based on the policy, not the certificate. Endorsements referenced on the certificate only matter if they were actually added to the policy.

This is where certificate holders sometimes get burned. A certificate can list “additional insured” in the Description of Operations field even when the endorsement was never attached to the policy, leaving the certificate holder with no coverage at all. For high-stakes contracts, ask for copies of the actual endorsement pages, not just the certificate that references them.

Fraud Exposure

Issuing a fraudulent certificate, one that misrepresents coverage that doesn’t exist or inflates limits beyond what the policy provides, carries serious consequences. Under federal law, knowingly making a false material statement in connection with insurance carries a penalty of up to ten years in prison. If the false statement jeopardizes the financial soundness of an insurer to the point that a court places the insurer in conservation, rehabilitation, or liquidation, the maximum rises to fifteen years.1Office of the Law Revision Counsel. 18 USC 1033 – Crimes by or Affecting Persons Engaged in the Business of Insurance Whose Activities Affect Interstate Commerce Most states add their own fraud statutes on top. Agents, brokers, and policyholders who knowingly provide or accept falsified certificates all carry exposure.