How to Fill Out and Submit a Workers’ Comp Waiver Form

A workers’ comp waiver form is the document certain owners, officers, members, and partners file with their state workers’ compensation agency to opt themselves out of their company’s workers’ compensation policy. Filing one removes your salary from the payroll figure your insurer uses to calculate premiums, which can noticeably lower what the business pays. Every state runs its own program, so the form’s name, the ownership threshold, the fee, and the renewal cycle all vary. The steps below apply across most jurisdictions; confirm the specifics with your state’s workers’ compensation division before you file.

Who Can File a Waiver

Eligibility turns on having a real ownership stake or leadership role. The people who most commonly qualify are corporate officers, members of a limited liability company, and partners in a partnership. Sole proprietors are often treated as the business itself rather than as employees, and in many states they aren’t required to carry coverage at all, which means no waiver is needed.

Most states set a minimum ownership percentage before you can opt out. The threshold ranges from about 10 percent to 25 percent, and some states set no specific percentage for certain business structures. A handful of states also cap the number of officers who can be exempt within a single corporation, sometimes at as few as two or three. If your ownership falls below the threshold or you exceed the cap, the application will be denied.

The waiver covers only the person who signs it. The business still has to carry workers’ compensation for every other non-exempt employee, including part-time workers and family members. Several states explicitly require family members on the payroll to be covered regardless of their relationship to the owner, so don’t assume a spouse or child qualifies for an exemption just because you do.

What to Gather Before You Open the Form

Have all of the following in front of you before you start. A single missing item can send the application back:

  • The business’s exact legal name as filed with your Secretary of State, and its Federal Employer Identification Number.
  • Your Social Security Number (or the last four digits, depending on the state), date of birth, and state-issued ID number.
  • Your exact ownership percentage. Some states require supporting documentation; others take your attestation under penalty of perjury.
  • Confirmation that you are listed as an officer, member, or partner in your state’s corporate records. If the registration is inactive, expired, or doesn’t name you, the form will be rejected.
  • Your workers’ compensation classification code, which describes the type of work the business performs. Codes maintained by organizations like the National Council on Compensation Insurance set the base rate for your industry, and your current insurer can tell you which one applies.
  • The name and policy number of the business’s current workers’ compensation carrier.

The form itself goes by different names from state to state: “Notice of Election to be Exempt,” “Rejection of Coverage,” “Certificate of Exemption Application,” and similar variations. Download it directly from your state workers’ compensation division or department of labor site. Submitting an outdated version is one of the most common reasons applications come back without processing.

Filling Out the Form

The form usually runs one or two pages. Most of it is mechanical if you’ve gathered the documents above, but a few fields catch people out.

Enter the business name character-for-character as it appears in your Secretary of State filing. If your operating name differs from the legal name, use the legal name. Enter the FEIN without dashes unless the form formatting requires them. For your personal information, use the residential address where you actually receive mail. Some states reject applications that list only a commercial address for the individual applicant.

Use the exact title shown in your corporate records: President, Managing Member, General Partner, and so on. The ownership percentage field matters more than it looks. Entering a figure below your state’s minimum threshold makes the application automatically ineligible, so check the number against your operating agreement or corporate bylaws before you submit.

If the form asks you to describe the business or pick an industry classification, be specific. “Construction” is too vague when the dropdown has subcategories like residential remodeling or commercial electrical. The classification you pick can trigger additional rules, especially in construction.

Sign and date the form. Some states require the signature to be notarized; others accept an electronic signature through their online portal. Read the declaration above the signature line. In most states you are signing under penalty of perjury that you meet the eligibility requirements.

Submitting the Form

Many state agencies now run online portals where you can file the application, pay any fee, and get electronic confirmation. Online filing is the fastest route and creates an immediate record of submission. If your state doesn’t offer electronic filing, mail the completed form by certified mail with a return receipt so you can prove the submission date. Some jurisdictions also accept walk-in filings at district offices.

Fees vary. Some states charge nothing; others charge between $25 and $100 per applicant. A few states set different fee amounts depending on whether you hold a contractor’s license. Fees are generally non-refundable and payable by credit card, electronic check, or money order at the time of filing.

Processing times run from near-instant for states with automated systems to around 30 days where applications are reviewed by hand. Until you receive official confirmation, whether that’s a Certificate of Election to be Exempt, a confirmation number, or a printed certificate from the portal, you are still covered under the company’s policy. Don’t tell your insurer to remove you until you have that certificate in hand.

After Approval

Send a copy of the certificate to your workers’ compensation carrier immediately. The carrier uses it to recalculate premiums by removing your salary from the covered payroll. If you work as a subcontractor, expect general contractors to ask for a copy before they let you on a job site; they need it to confirm they won’t be liable if you’re injured.

Keep the certificate somewhere you can produce it on short notice. Insurance auditors, general contractors, and state compliance inspectors may all ask to see it. A digital copy in cloud storage plus a physical copy in your business files covers most situations.

Waivers are not permanent. Most states require renewal every one to three years, with two years the most common interval. If the exemption lapses, your insurer may retroactively add your salary back into the payroll calculation for the uncovered stretch, producing an unexpected premium bill. Some states also penalize operating with an expired exemption, with the construction industry drawing the strictest enforcement. Set a calendar reminder at least 60 days before expiration so you have time to renew without a gap.

You also need to refile if your ownership percentage drops below the threshold, the business changes its legal name, or the entity changes structure, such as converting from an LLC to a corporation. Any of those changes can invalidate an existing waiver.

Revoking the Waiver

If your situation changes and you want back on the policy, you can revoke the waiver. The process mirrors the original: file a revocation form, or submit the request through the same online portal, with your state’s workers’ compensation agency. The revocation generally has to be filed by the person named on the original certificate or by an authorized officer of the business.

Once the revocation is filed, notify your workers’ compensation carrier so they can add you back to the policy and adjust premiums. If you work as a subcontractor, you typically have to notify the general contractor that your waiver is no longer in effect. Revocation takes anywhere from a few days to a few weeks depending on the state. Until it’s processed, you remain uncovered, so time it to avoid a gap if coverage matters to you.

Extra Rules if You Work in Construction

Construction is where waivers get the most scrutiny and the rules tighten. Several states impose stricter requirements on construction businesses than on other industries: higher ownership thresholds, lower caps on the number of exempt officers, mandatory contractor licensing, or outright prohibition of waivers for construction workers.

The reason is liability. In most states, when a subcontractor doesn’t carry workers’ compensation and one of their workers is hurt on a job site, the general contractor up the chain becomes responsible for benefits. That is why most general contractors require proof of coverage or a valid exemption certificate from every subcontractor before work starts.

If you own a construction business and are filing for a waiver, expect the application to ask for your contractor’s license number and possibly a separate registration with your state’s construction services provider registry. Some states charge higher fees for construction exemptions, and the agency may verify your ownership stake against Secretary of State records before approving.

What You Give Up by Filing

This is the part of the decision that deserves the most thought. When you waive workers’ compensation, you give up the right to medical benefits, lost-wage payments, and disability benefits for any injury that happens on the job. Most people assume their private health insurance will pick up the slack. It usually won’t.

Standard health insurance policies typically exclude work-related injuries, on the logic that workers’ compensation is supposed to cover them. If you’ve waived coverage and break your wrist on a job site, your health insurer may deny the claim entirely, leaving you to pay the full cost of treatment. A few health policies offer riders that add workplace injury coverage, but they’re uncommon and have to be arranged in advance.

One alternative is occupational accident insurance, a private policy aimed at people who aren’t covered by workers’ compensation. It generally covers medical expenses from workplace injuries, provides partial wage replacement, and includes a death benefit. Premiums tend to run roughly 30 to 50 percent less than workers’ compensation, but the coverage is narrower, with benefit caps and more exclusions in the fine print. It isn’t a perfect substitute, but it closes the biggest gap.

Filing a waiver lowers premiums, but it moves real financial risk onto you personally. For someone who works at a desk, that risk is modest. For someone climbing ladders or operating heavy equipment, it is a calculation worth running carefully with both an insurance agent and an accountant before you sign.