A builders risk reporting form is the monthly schedule you send your insurer listing every active construction project and its current value, so your coverage limits and premium adjust to real exposure instead of a fixed amount set at policy inception. The grid itself is simple. The numbers you put in it decide both what you pay each month and what you can collect if a site burns down, so the discipline matters more than the paperwork.
How the Policy Behind the Form Works
A standard builders risk policy covers one project at a fixed limit for a set term. A reporting form policy covers all your active projects under a single policy, and the limit at each site moves with the values you report each month. You pay premium only on the exposure that actually exists during the reporting period, which keeps you from overpaying during excavation and foundation stages when little value sits on the ground.
Two reporting structures are common. A value-at-risk policy bases premium on the current value of work in place, meaning what you would actually lose if the site burned today. A total completed value policy bases coverage on the final projected cost of the finished structure regardless of how far along construction is. Confirm which structure your policy uses before you enter a single number, because it changes how you fill several of the columns.
Who Should Be Using One
Reporting form policies are built for builders running multiple projects at once, typically high-volume residential builders or commercial developers with a revolving inventory of starts. If you build one or two homes a year, the monthly administrative load isn’t worth it and a flat-premium single-project policy is the normal fit. If you have a steady pipeline, the reporting form saves you from buying individual coverage at every groundbreaking.
Gather Your Project Data First
Before you open the form, pull the following from your accounting software and project files:
- Site address for each active project.
- Construction start date, which establishes when the risk period began.
- Total completed value estimate: the final anticipated cost of the finished project including materials, labor, and overhead, taken from the contract or budget. This figure stays constant unless change orders alter the scope.
- Current value of work in place: the dollar value of labor performed, permanent fixtures installed, and materials stored on-site as of the reporting date. This number changes every month.
- Soft costs, if your policy covers them. These are expenses that would continue or increase if a covered loss delayed construction: interest on construction loans, additional permit and re-inspection fees, architect and consultant fees for revised plans, extended general conditions, advertising for a rescheduled opening, real estate taxes during the delay, and additional insurance premiums during reconstruction. Soft costs are usually covered by endorsement and may carry a separate deductible tied to the length of the delay.
- Off-site materials, if your policy includes transit and off-site coverage. These are materials at warehouses, staging yards, or in transit. This typically requires a separate endorsement, so check before including the values.
If your general ledger and the reporting form show different numbers, you will have problems during both audits and claims. Treat the ledger as the source of truth and reconcile against it every month.
Filling Out the Grid
Your broker or carrier provides the form as a digital template, a PDF, or a secure underwriting portal. Each row is one project. The columns capture the data above.
For every active site, enter the address, the total completed value, and the current value of work in place for the period. Most forms have dedicated columns for starts (new projects joining the coverage pool this month) and completions (projects coming off). On a new start, include the full estimated completed value and the work-in-place value as of the reporting date. Any existing inventory on the day the policy first takes effect has to be reported within five days of the effective date to receive coverage.
If your policy uses an average-value basis instead of a point-in-time snapshot, you’ll report the mean of exposure at the beginning and end of the cycle. A project with $200,000 in place on the first and $260,000 at month-end is reported at $230,000.
The non-negotiable discipline is matching the work-in-place column to your accounting records. Mismatches show up during the premium audit, and they show up again when an adjuster compares what you reported against what was actually on the site at the time of a loss.
Calculating the Premium
Most reporting form policies expect you to calculate and remit the premium with each monthly report. The formula: take the total completed value for each structure, divide by $100, and multiply by the premium rate stated in your policy. That’s the premium due for that project this period.
On a new start with a $450,000 total completed value and a rate of $2.50 per $100: $450,000 ÷ $100 = $4,500, then × $2.50 = $11,250. Builders risk rates generally run between 1% and 5% of total construction cost, depending on project type, location, and risk factors like coastal exposure or wood-frame construction.
Some carriers bill after processing the report instead of expecting payment with it. Your policy or the form itself will say which applies. Either way, premium rises as projects accumulate value and drops as completed projects roll off.
Submitting the Form and the Deadline That Matters
Carriers usually send the form around the middle of each month. You complete it to reflect all inventory and any new starts before the month-end date printed on it, then return it with payment by the due date shown. Most carriers accept uploads through a portal or email to a designated underwriting address, and some still accept certified mail if you want physical proof of delivery. Expect a confirmation or an updated schedule of values within a few business days.
The deadline is where coverage can quietly disappear. On a monthly reporting form policy, a new start reported more than 30 days after the end of the month in which construction began does not have coverage until the date the carrier actually receives the report. The gap is yours.
Adding Starts and Removing Completions
A new project needs to appear on the next reporting form as soon as you break ground or even begin receiving materials at the site. Coverage doesn’t exist for a site until you report it, and builders risk coverage should be in place by the time materials arrive, not when vertical construction begins.
A project leaves the form when coverage ends, which happens at the earliest of several triggers under a common builders risk form:
- Ninety days after initial occupancy of the building, with exceptions for model homes and single-family remodels.
- The property is leased or rented: immediately for a single-family dwelling, when 50% or more of units are leased for a two-to-four-family dwelling, or when 75% or more of square footage is leased for a commercial structure.
- Permanent property insurance takes effect, whether purchased by you or the buyer.
- The owner or buyer accepts the property and the contractor has been paid in full, or ownership has transferred.
- You abandon the site with no intention to complete it.
- Twelve months from the month you first reported the location, unless you re-report and pay additional premium. Re-reporting is available for up to two additional twelve-month terms on new construction, or one additional term on remodels.
Once a trigger hits, stop reporting the site. Continuing to list it won’t extend coverage; it just generates premium you don’t owe.
Why the Numbers Decide Your Claim
Reported values set the ceiling on what you can recover. Reporting form policies include a coinsurance-style provision that ties the payout to the accuracy of your last submitted report:
(Last Reported Value ÷ Actual Value at Time of Loss) × Claim Amount = Your Recovery
If a site actually held $500,000 of work in place and you reported $400,000, you reported 80% of true value. On a $200,000 claim, you recover $160,000 and absorb the $40,000 shortfall yourself. Under-reporting to shave premium is the most expensive mistake you can make with this form. The premium savings are modest. The claim reduction is not.
Late and missing reports stack their own penalties on top. On an annual reporting form policy, a late report means coverage begins the day the carrier receives it, and anything that happened before that date is uncovered. On a monthly policy, if one or more completed reports for a site are missing at the time of a loss, you bear a share of the covered loss proportional to the missing reports. Six reports owed, four submitted: you carry two-sixths of the loss. A site that is both under-reported and missing reports gets cut from both directions at once.
Preparing for the Year-End Audit
At the end of the policy period, the carrier audits your reported values against your actual financial records. Under-reporting means additional premium owed. Over-reporting may generate a credit.
Have these ready before the auditor arrives:
- General financial records: profit and loss statements, bank statements, and tax returns covering the policy period.
- Project documents: contracts, change orders, and invoices for each reported project.
- Subcontractor documentation: certificates of insurance and contracts for every subcontractor used during the period. Without these, the carrier may treat subcontractor costs as your own exposure and raise the audit premium.
- Payroll records, if any portion of the policy is payroll-rated: payroll journals broken out by employee or job type, along with payroll tax filings.
- Prior audit reports, which help the auditor identify classification changes or patterns.
If the results look wrong, you can dispute them; the process varies by carrier and typically involves a formal dispute application with supporting documentation. Keep copies of every monthly report you submitted during the period. Those are your evidence that you reported accurately and on time.