How to Complete a Trailer Interchange Form: Parties, Inspection, and Insurance

To complete a trailer interchange form correctly, identify both carriers and the specific trailer, state the exchange points, how the equipment will be used, and the compensation, attach a signed pre-exchange inspection report, record the trailer interchange insurance in force, and have both parties sign — then keep a copy in the trailer while it moves. Those elements track the federal requirements at 49 CFR § 376.31, which governs equipment interchange between authorized for-hire carriers.1eCFR. 49 CFR Part 376 – Lease and Interchange of Vehicles

Confirm You Need an Interchange Form, Not a Lease

Interchange under § 376.31 is a temporary swap of equipment between two authorized for-hire carriers to complete a through movement or share trailer capacity. The receiving carrier operates the trailer under its own authority. If instead you are placing equipment into another carrier’s fleet for longer-term use, that transaction is a lease under §§ 376.11 and 376.12, or the streamlined carrier-to-carrier exemption at § 376.22, and those forms carry different content requirements.2eCFR. 49 CFR 376.22 – Exemption for Private Carrier Leasing and Leasing Between Authorized Carriers Pick the right instrument before you start filling in blanks; the rest of this guide assumes you need an interchange form.

Fill In the Parties and Equipment

Open the form with the full legal names and business addresses of the providing carrier and the receiving carrier. Add each party’s USDOT number. The intermodal equipment marking rule at 49 CFR § 390.21(g) requires the equipment provider’s USDOT number to be identifiable either on the trailer, in the interchange agreement, or through a real-time accessible database, so the agreement is one of the three places this number can live.3eCFR. 49 CFR 390.21 – Marking of Self-Propelled CMVs and Intermodal Equipment

The equipment description has to identify the exact trailer. Record the trailer unit number, the Vehicle Identification Number, and the license plate number with its issuing state. When the agreement is itself serving as the provider’s identification marking under § 390.21(g)(4)(iii), include the VIN along with a four-character Standard Carrier Alpha Code and six-digit unique identifying number.3eCFR. 49 CFR 390.21 – Marking of Self-Propelled CMVs and Intermodal Equipment Note the trailer type (dry van, reefer, flatbed) and length as well. No federal rule specifically requires those fields, but adjusters and inspection officials match paperwork to the physical asset using whatever detail you provide.

Write Down the Exchange Points, Usage, and Compensation

Section 376.31 names three operational facts the agreement must contain, and these are the ones carriers most often leave vague:

  • The specific points of interchange — the physical locations where the trailer changes hands.
  • How the equipment will be used, including any geographic or route restrictions.
  • The compensation the receiving carrier pays for using the trailer.1eCFR. 49 CFR Part 376 – Lease and Interchange of Vehicles

Add the start and end dates even though § 376.31 does not prescribe specific date fields. Pin down the expected return date, the return location, and what happens if the receiving carrier holds the trailer past the agreed period, whether that means additional daily charges, automatic termination, or something else. An open-ended agreement gives the receiving carrier no incentive to return equipment and the providing carrier no contractual lever to demand it back.

For compensation, write out the rate structure (flat daily or weekly, per mile, per load), the payment terms, and any late-payment penalties. Section 376.31(c) requires equipment-use fees to stay separate from any divisions of joint rates, so do not bury the interchange charge inside the freight invoice. Freight itself moves on through bills of lading issued by the originating carrier.

Attach a Pre-Exchange Inspection Report

The inspection report is the single most important attachment to the agreement. Without it, the receiving carrier has almost no defense against damage claims for conditions that existed before the exchange. The National Private Truck Council’s template states the default plainly: accepting a trailer without a written inspection report or contemporaneous notice is treated as the receiving carrier’s acknowledgment that the equipment arrived in good working order and free of defects.4National Private Truck Council. Trailer Interchange and Indemnity Agreement

For intermodal equipment, 49 CFR § 396.11(b) sets the minimum items the driver’s report must cover:

  • Brakes, air systems, and connections
  • Lighting, markers, and conspicuity material
  • Wheels, rims, lugs, and tires
  • Air line connections, hoses, and couplers
  • King pin and upper coupling device
  • Rails, support frames, and tie-down bolsters
  • Locking pins, clevises, clamps, and hooks
  • Sliding frame locks

The report must carry the motor carrier’s USDOT number, the equipment provider’s USDOT number, a unique equipment identifier, the date and time submitted, a description of any damage or deficiencies, and the driver’s signature.5eCFR. 49 CFR Part 396 – Inspection, Repair, and Maintenance If a safety-related defect turns up, notify the owner before using the trailer. If nothing turns up, § 396.12 does not require a written report, but document the clean condition anyway; the absence of a report works against you if damage shows up later.

Allocate Maintenance and Repair Authority

Split maintenance duties on the form. The receiving carrier typically handles day-to-day upkeep — pre-trip inspections, tire pressure, basic lighting repairs — because that carrier controls the equipment and has drivers on site. The providing carrier usually keeps responsibility for major structural work, since it owns the asset and the long-term shop relationship.

Set a repair authorization threshold so the receiving carrier cannot run up a shop bill without the owner’s knowledge. Some agreements set this as low as $100; above that figure, the receiving carrier must get the owner’s approval before work begins.6ArcBest. Trailer Interchange Agreement State how repairs will be documented and reimbursed: whether the receiving carrier pays upfront and invoices the owner, whether the owner issues a purchase-order number for direct billing, or some other mechanism. Disputes over who authorized a particular repair are among the most common friction points in interchange relationships.

Record Insurance and Indemnification

Standard commercial auto liability does not cover physical damage to a trailer you are pulling under someone else’s authority. A separate trailer interchange policy covers damage to or loss of a non-owned trailer while it is in your possession under a written interchange agreement. Typical limits run from around $15,000 to $65,000 or more, depending on the provider’s requirements and trailer value.

On the form, record the policy number, the issuing insurer, the coverage limits, the deductible, and the policy’s effective dates. The providing carrier will often require a certificate of insurance before releasing equipment. If you operate under the Uniform Intermodal Interchange and Facilities Access Agreement, the UIIA sets its own minimum insurance requirements and may require a dedicated endorsement.7Intermodal Association of North America. Uniform Intermodal Interchange and Facilities Access Agreement

The indemnification clause assigns financial responsibility when a third party files a claim. In most interchange agreements, the receiving carrier indemnifies the owner for losses that occur while the trailer is under the receiving carrier’s control. Spell out what triggers that obligation and what is excluded. Vague indemnity language invites litigation rather than preventing it.

Cargo Damage

Cargo loss during an interchange raises a separate question from physical damage to the trailer. The carrier in possession of the trailer at the time of the loss generally bears responsibility for damaged freight. State this on the form and clarify whether the receiving carrier’s cargo insurance is primary or whether the shipper’s coverage responds first. If the agreement is silent, expect the providing carrier to argue that whoever had custody is on the hook.

Hazardous Materials

If the trailer will carry hazmat, pollution liability and an MCS-90 endorsement may be needed on top of standard trailer interchange coverage. Confirm the receiving carrier’s policy covers hazmat loads; some insurers exclude certain classes, particularly poisonous gases, radioactive materials, and infectious substances. Note the hazard class and UN number of any hazardous commodities on the agreement.

Sign the Form and Keep a Copy in the Trailer

Both parties or their authorized representatives must sign. Sections 376.31(a) and 376.22(c)(1) each require signatures.1eCFR. 49 CFR Part 376 – Lease and Interchange of Vehicles Electronic signatures are valid under the federal ESIGN Act when all parties agree to conduct the transaction electronically, and many carriers now execute these agreements through digital platforms.

A copy of the agreement has to travel in the equipment while it is in the receiving carrier’s possession.2eCFR. 49 CFR 376.22 – Exemption for Private Carrier Leasing and Leasing Between Authorized Carriers This is a hard requirement. For trailer-only interchanges under § 376.31, carrying either the agreement itself or a signed statement identifying the equipment, the interchange point, the date and time of the exchange, and the intended use will satisfy the in-cab requirement.1eCFR. 49 CFR Part 376 – Lease and Interchange of Vehicles

Carriers using a master interchange agreement that governs multiple exchanges over time can carry a copy of the master lease in each piece of equipment, provided receipts are exchanged for each individual transfer and equipment records are maintained per § 376.11(d).2eCFR. 49 CFR 376.22 – Exemption for Private Carrier Leasing and Leasing Between Authorized Carriers Keep the original or a verified copy at your principal business office in case FMCSA auditors or insurance adjusters ask for it.

Templates You Can Start From

You don’t need to draft the form from scratch. The National Private Truck Council publishes a downloadable Trailer Interchange and Indemnity Agreement that covers inspection protocols, indemnification, maintenance allocation, and insurance.4National Private Truck Council. Trailer Interchange and Indemnity Agreement Larger carriers such as ArcBest publish their own forms that receiving carriers complete and sign.6ArcBest. Trailer Interchange Agreement For intermodal moves between truck, rail, and ocean transport, the Uniform Intermodal Interchange and Facilities Access Agreement is the standard industry contract, with an addendum template for specifying free time, use charges, and additional insurance requirements.8Intermodal Association of North America. Uniform Intermodal Interchange and Facilities Access Agreement

Whichever template you choose, read it against the § 376.31 checklist before you sign: specific equipment description, exchange points, usage terms, compensation, and signatures. If any element is missing, add it. A template moves you most of the way; the facts that matter most — the trailer you’re actually exchanging, the locations, the insurance in force right now — have to come from you.