To charge a credit card, a business opens a merchant account with an acquiring bank or signs up with a payment aggregator, connects a card reader, point-of-sale system, or online payment gateway, and sends each transaction through the card network for authorization and settlement. The tap or swipe is the easy part. Knowing how to charge a credit card the right way means understanding the account setup, the fees layered into every sale, the federal receipt rules, and the security standards your processor will hold you to from your very first transaction.
What You Need Before Your First Sale
You have two paths. A traditional merchant account is a dedicated account held with an acquiring bank that processes card payments on your behalf. A payment aggregator pools many small businesses under a single master merchant account, which simplifies onboarding but gives you less individual control over hold times and dispute handling. Most new businesses start with an aggregator because approval takes minutes instead of days, then move to a dedicated merchant account as volume grows.
Either way, the provider will ask for your federal Employer Identification Number (or your Social Security Number if you operate as a sole proprietor), proof of business registration, and a linked bank account for deposits. Federal anti-money-laundering law requires every financial institution to verify the identity of anyone opening an account. Under 31 U.S.C. § 5318(l), institutions must follow minimum standards for confirming who you are, keeping records of the identifying information, and screening applicants against government watchlists.1Office of the Law Revision Counsel. 31 USC 5318 – Compliance, Exemptions, and Summons Authority That’s why the application feels more like opening a bank account than signing up for software.
Once approved, you sign a merchant processing agreement. It spells out your fee schedule, reserve requirements, chargeback policies, and the circumstances under which the provider can freeze your funds. Read the termination clause carefully. Some agreements lock you in for a year or longer with an early cancellation fee. Keep a dedicated business bank account linked to the merchant account so card revenue stays separate from personal finances.
Picking the Hardware or Software That Matches Your Sales
Your processing partner provides the equipment or software you use to capture card data. The right choice depends on whether you sell in person, online, or both.
- Countertop terminals sit next to a register and accept chip insertions, contactless taps, and magnetic stripe swipes. They connect through Wi-Fi, Ethernet, or cellular data.
- Mobile card readers pair with a phone or tablet over Bluetooth, letting you take payments at job sites, markets, or pop-ups.
- Virtual terminals are web-based portals where you manually type card details from a computer. Useful for phone orders and invoicing.
- Payment gateways sit between your website’s checkout page and the processing network, encrypting card data submitted by online shoppers.
Whatever you pick, make it chip-capable. Since October 2015, the major card networks shifted counterfeit-fraud liability to whichever party in a transaction has not adopted EMV chip technology. If a customer pays with a chip card and your terminal only reads magnetic stripes, you absorb the cost of any counterfeit fraud on that transaction instead of the card-issuing bank.2U.S. Payments Forum. Understanding Fraud Liability for EMV Contact and Contactless Transactions in the US A chip-enabled terminal that falls back to a swipe for technical reasons generally keeps the issuer on the hook, as long as the fallback is properly flagged in the transaction data.
Running a Transaction, Step by Step
Each credit card carries a short set of data points your terminal or gateway captures to route the payment: the 15- or 16-digit primary account number (Visa, Mastercard, and Discover use 16 digits; American Express uses 15), the four-digit expiration month and year, and the security code (three digits on the back of Visa, Mastercard, and Discover; four digits on the front of American Express). When the card isn’t physically present, that data gets paired with billing address and ZIP code for the Address Verification System to compare against what the issuer has on file.
Once the data is captured, the transaction moves through a chain of institutions in roughly two seconds:
- Your terminal sends the card data to your acquiring bank or aggregator, which forwards it through the card network to the issuing bank.
- The issuing bank checks whether the card is valid, the account has sufficient credit, and no fraud flags are triggered, then returns an approval or decline code.
- Approved transactions accumulate throughout the day. At a scheduled cutoff (often end of business), your system submits the full batch to the acquiring bank for settlement.
- The acquiring bank routes the batch through the networks, the issuing banks transfer the funds, and most merchants see the money hit their linked bank account within one to two business days after the batch is submitted.
That last point matters. If you run a sale at 9 a.m. but your batch doesn’t close until midnight, the funding clock starts at midnight, not at the swipe. Some processors let you close a batch manually, which can move your deposit up by a day.
Fees You’ll Pay on Every Sale
Every credit card transaction carries three layers of fees: interchange paid to the card-issuing bank, assessments paid to the card network, and the processor’s markup. How those are packaged determines what you actually pay.
Under interchange-plus pricing, the processor passes through the exact interchange and assessment fees charged by the networks and adds a fixed markup, such as 0.25% plus 10 cents per transaction. Every component is itemized on your statement, so you can see what the networks charge and what the processor charges. For most businesses with any real volume, this is the more transparent model.
Under tiered pricing, the processor sorts transactions into buckets, typically “qualified,” “mid-qualified,” and “non-qualified,” each with a bundled rate. An in-person chip transaction on a basic consumer card might land in the cheapest tier, while a keyed-in corporate rewards card falls into the most expensive one. The processor decides which tier each transaction falls into, and the criteria are often opaque. A low “qualified” rate on a quote can get expensive once you see where your real mix of transactions ends up.
Across both models, average effective rates for Visa and Mastercard credit transactions ran about 2.9% in 2024.3Merchants Payments Coalition. Credit and Debit Card Swipe Fees Totaled $236 Billion in 2024, Over One-Quarter Higher Than Previously Reported Your actual rate depends on your industry, average ticket size, how the card is entered, and which cards your customers carry. Rewards cards and corporate cards almost always cost more than basic consumer cards.
What Has to Appear on the Receipt
Federal law restricts what you can print on a credit card receipt. Under the Fair and Accurate Credit Transactions Act (FACTA), codified at 15 U.S.C. § 1681c(g), any business that accepts credit or debit cards is prohibited from printing more than the last five digits of the card number, or the expiration date, on any electronically printed receipt.4Office of the Law Revision Counsel. 15 USC 1681c – Requirements Relating to Information Contained in Consumer Reports The statutory ceiling is five digits, though many processors truncate to four as an added precaution.
The rule applies to any receipt generated by an electronic cash register, card terminal, or point-of-sale system. It does not apply to handwritten receipts or physical card imprints. Violations expose you to private lawsuits, including class actions, so confirm your terminal is configured correctly before you process a single sale.
Surcharging the Customer for Card Costs
You can pass processing costs to the customer as a surcharge, but only within limits set by the card networks and your state.
Mastercard caps surcharges at 4% or your actual cost of acceptance, whichever is lower.5Mastercard. Merchant Surcharge Rules Visa lowered its cap to 3% in April 2023. Since you generally have to honor the lowest network cap for the card brand being used, 3% is the practical ceiling for most businesses. Neither network allows surcharges on debit cards or prepaid cards. The surcharge applies only to credit transactions.
At the state level, Connecticut and Massachusetts prohibit credit card surcharges entirely. Every other state permits them with varying disclosure requirements. The general rule where surcharging is allowed is the same: notify customers at the store entrance (or on your website’s homepage), again at the point of sale, and on the receipt as a separate line item. Poor disclosure can trigger fines and complaints to the networks, which may revoke your ability to surcharge at all.
Voiding vs. Refunding a Transaction
A void cancels a transaction before the batch settles. The charge never completes, no money moves, and you avoid the interchange fees you would have paid on a settled sale. If a customer changes their mind or you entered the wrong amount, voiding before your daily batch closes is always the cheaper option.
A refund reverses a transaction after settlement. The money has already moved from the issuing bank to your account, so the processor must initiate a separate credit back to the cardholder. Refunds typically take three to seven business days to show up on the customer’s statement. You generally do not recover the interchange you originally paid on the sale, so a refund costs you more than a void even though the customer gets the same result. Some processors add a per-transaction fee for refunds on top of the lost interchange.
Chargebacks and Disputes
A chargeback happens when a cardholder contacts their issuing bank to dispute a charge and the bank reverses the transaction. You lose the sale amount, and your processor adds a chargeback fee, typically $20 to $100 per dispute. If you want to fight the chargeback, you submit evidence (receipts, delivery confirmation, communication logs) through a process called representment, which can carry additional fees if it escalates to arbitration.
Consumers can initiate a billing dispute within 60 days of the statement containing the charge.6Consumer Advice (FTC). Using Credit Cards and Disputing Charges That window is generous, so a chargeback can arrive weeks after you considered a transaction closed. The strongest defenses are clear billing descriptors (so the customer recognizes your business name on their statement), prompt shipping with tracking, and responsive customer service that resolves complaints before they turn into disputes.
If your chargeback rate climbs, the networks notice. Visa’s Acquirer Monitoring Program flags merchants whose combined fraud and dispute ratio hits 1.5% of settled transactions with at least 1,500 disputes in a month.7Visa. Visa Acquirer Monitoring Program Overview Landing in that program means escalating fines passed through from your acquiring bank, and in severe cases loss of your ability to accept Visa cards.
PCI DSS Security Rules
Any business that stores, processes, or transmits cardholder data must comply with the Payment Card Industry Data Security Standard (PCI DSS). The card networks enforce the rules through your acquiring bank or processor, and the requirements scale with your transaction volume.
- Level 1 covers more than 6 million transactions per year. It requires an annual on-site assessment by a Qualified Security Assessor and quarterly network vulnerability scans.
- Level 2 covers 1 million to 6 million transactions per year, with an annual Self-Assessment Questionnaire (SAQ) and quarterly scans.
- Level 3 covers 20,000 to 1 million e-commerce transactions per year, with the same SAQ and scanning requirements as Level 2.
- Level 4 covers fewer than 20,000 e-commerce transactions or fewer than 1 million total transactions per year. SAQ and scans are recommended and often required by your processor.
The Self-Assessment Questionnaire comes in several versions depending on how your business handles card data. A retailer using a standalone terminal that connects directly to the processor fills out a shorter questionnaire than an e-commerce business whose website touches card numbers during checkout.8PCI Security Standards Council. Merchant Resources Your processor can tell you which version applies.
Non-compliance has teeth. Fines assessed through the networks start at roughly $5,000 to $10,000 per month for the first few months, escalate to $25,000 to $50,000 per month, and can reach $100,000 per month for prolonged violations. Those fines are charged to your acquiring bank, which passes them straight to you, often alongside termination of your merchant account. A data breach while non-compliant compounds the damage with forensic investigation costs, mandatory cardholder notification, and potential lawsuits.
Tax Reporting on Form 1099-K
If you accept credit or debit card payments through a payment card processor, the processor must file Form 1099-K with the IRS reporting your gross payment volume, regardless of the amount. There is no minimum dollar threshold and no minimum number of transactions for payment card processors.9Internal Revenue Service. Understanding Your Form 1099-K Even a single $50 sale all year has to be reported.
The $20,000-and-200-transaction threshold that gets a lot of attention applies only to third-party settlement organizations like online marketplaces and payment apps, not to direct credit card processing.10Internal Revenue Service. Form 1099-K FAQs – General Information A lot of small business owners assume low volume keeps them off the IRS’s radar; it doesn’t. The amounts on your 1099-K should match your reported business income, so reconcile your processing statements against the form each year before you file.