To add an additional insured to a certificate of insurance, contact your insurance broker or carrier and ask them to attach the specific endorsement your contract requires to your commercial general liability policy. Send the request with the additional party’s exact legal name and address, the nature of your relationship, and the insurance section of the contract itself. Processing typically takes a few business days, and when the revised certificate comes back, you’ll want to confirm the endorsement forms and any required language appear on it before forwarding it along.
Gather the Information Before You Call
Most of the back-and-forth in this process comes from incomplete initial requests. Pulling the following together before you contact your broker usually turns a week of emails into a single submission.
- The additional insured’s exact legal name as it appears on official filings. A misspelled name or an informal abbreviation can make the endorsement unenforceable.
- The physical street address, which ties the coverage to a specific location of operations or risk.
- The nature of the relationship — property owner, lessor, general contractor, project manager — because this determines which endorsement form applies.
- The insurance section of the contract or lease, including required endorsement forms, minimum limits, and any special language such as “primary and noncontributory.”
- Any specific Insurance Services Office (ISO) form numbers the contract calls out. Providing them upfront lets your broker attach the right endorsement without guessing.
Having the contract’s insurance section in hand when you call or email is the single most efficient thing you can do.
Submit the Request
Most agencies now offer an online portal where you can upload the insurance requirements section of your contract directly. If your broker doesn’t have a portal, a detailed email with the contract’s insurance section attached works. Include the additional insured’s legal name and address, the endorsement forms required, and any special language (primary and noncontributory, waiver of subrogation) spelled out in the contract.
Processing typically takes a few business days, though timelines vary by carrier. Complex endorsements or policies with unusual terms may take longer if underwriting review is required. If your project has a hard start date, submit the request as early as possible and tell your broker the deadline. Some carriers offer expedited processing for urgent requests, though rush handling may carry an additional fee.
Keep a record of your submission confirmation. If any conflict arises between what the contract requires and what your policy limits allow, your agent will contact you to work through adjustments before finalizing the endorsement. That’s better than discovering the mismatch after the certificate has already gone out.
Pick the Right Endorsement Form
ISO publishes standardized endorsement forms that most carriers use. Two come up in nearly every commercial contract.
ISO CG 20 10 covers ongoing operations. It extends your liability coverage to the additional insured for injury or property damage caused by your work while you’re still performing it. Once the project wraps up, coverage under this form stops.
ISO CG 20 37 covers completed operations. It picks up where CG 20 10 leaves off, providing coverage after your work is finished for claims arising out of that completed work. Many contracts require both forms together, because a general contractor needs protection both while a subcontractor is on-site and after the sub packs up and leaves.
Other forms serve more specialized situations:
- CG 20 11 for managers or lessors of premises, commonly used in commercial leases.
- CG 20 12 for governmental agencies requiring coverage tied to permits or authorizations.
- CG 20 26 for a designated person or organization, used when the relationship doesn’t fit the other categories.
Not every carrier uses ISO forms verbatim. Some insurers issue proprietary endorsements with language that may be narrower than the ISO standard. If your contract specifically calls for ISO forms and your carrier offers a proprietary alternative, flag that for the requesting party before assuming it will be accepted.
Blanket or Scheduled?
A scheduled endorsement names a specific person or organization on the endorsement itself. Each new additional insured requires a separate request, a separate endorsement attached to the policy, and usually a separate fee. For a contractor adding 10 to 20 additional insureds per year, those per-request charges add up fast.
A blanket endorsement automatically grants additional insured status to any party you’re contractually required to add, without naming them individually. The language typically reads something like “any person or organization you are required to add as additional insured under a written contract.” This eliminates the risk of forgetting to submit a request and reduces your administrative burden to keeping copies of the contracts that trigger the coverage.
Blanket endorsements can vary in scope. A manuscripted blanket from one carrier may offer narrower protection than the ISO standard version from another. And because the insurer may not know who the additional insureds are until a claim lands, anyone relying on blanket coverage needs to retain proof of the written contract that triggers it. If you can’t produce the contract showing you agreed to provide the coverage, the blanket endorsement may not help at the moment it matters most.
Don’t Forget the Companion Requirements
Many contracts don’t stop at additional insured status. Two other requirements frequently appear in the same insurance section, and missing either one can put you in breach.
Primary and Noncontributory
This language means your policy pays first on claims involving the additional insured, without seeking contribution from the additional insured’s own insurance. Without it, your carrier and the additional insured’s carrier might argue over who pays what share, leaving the additional insured stuck in the middle of an insurer dispute. ISO form CG 20 01 is the standard endorsement for this, and many blanket additional insured endorsements include the language automatically when a written contract requires it.
Waiver of Subrogation
Subrogation is your insurer’s right to go after a third party to recover money it paid on your claim. A waiver of subrogation gives up that right for a specific relationship. Contracts require it because additional insured status and waiver of subrogation work together: additional insured status extends coverage to the other party, and the waiver prevents your insurer from turning around and suing that same party after paying a claim.
Check your contract for all three requirements before submitting your request. Sending back a certificate that shows additional insured status but omits primary and noncontributory language or the waiver of subrogation is a partial job that will get kicked back.
Review the Updated Certificate
When the revised certificate comes back, don’t just forward it along. A careful review takes two minutes and catches errors that could leave the additional insured without the coverage they’re counting on. The standard form you’ll receive is the ACORD 25, the industry-standard certificate of liability insurance. Focus on these areas:
- In the liability coverage section, confirm the additional insured box is checked. This signals that an endorsement has been attached to the policy.
- The Description of Operations box should contain the specific endorsement forms (CG 20 10, CG 20 37, and so on) and any required language like “primary and noncontributory” or “waiver of subrogation applies.” If the contract calls for specific ISO form numbers and they don’t appear here, the certificate doesn’t match the contract.
- The Certificate Holder block at the bottom should carry the additional insured’s full legal name and address. Verify the spelling character by character. A wrong letter in a company name has been enough to get certificates rejected.
- Confirm the effective and expiration dates cover the full term of the contract or project. A certificate that expires before the project ends leaves a coverage gap.
If anything is missing, misspelled, or doesn’t match the contract requirements, contact your agent immediately for a correction. Once everything checks out, forward the certificate to the requesting party along with copies of the actual endorsements if they’ve asked for them.
Know the Boundaries of What You’re Providing
A few points about what additional insured status is and isn’t will keep you from overpromising, and keep the other side from being surprised later.
A certificate holder is not an additional insured. A certificate holder simply receives a copy of your certificate as proof you carry coverage. That status gives them no rights under your policy. If the contract says “name us as additional insured,” sending a certificate that lists them only as the certificate holder is one of the fastest ways to trigger a breach-of-contract dispute.
Coverage is tied to your work. Under current ISO endorsement forms, the additional insured is covered only for liability caused in whole or in part by your acts or omissions. If the additional insured is solely at fault for an incident, the endorsement generally won’t respond. Neither CG 20 10 nor CG 20 37 covers the additional insured’s independent activities unrelated to your work.
The endorsement cannot exceed your policy’s limits. If the contract requires $2 million in coverage and your policy carries a $1 million per-occurrence limit, the endorsement provides only $1 million. The endorsement also cannot broaden your policy’s coverage beyond what the contract requires.
Fees and Renewal
For scheduled endorsements, many carriers charge a flat fee roughly in the range of $25 to $75 per endorsement. Blanket endorsements are typically priced as a single annual charge, often between $50 and $200 per year, and some carriers fold the cost into the base premium at no visible extra charge. Some endorsements also trigger an actual premium adjustment when the added coverage materially broadens the insurer’s exposure. Ask your broker for a clear breakdown before authorizing the endorsement.
Additional insured endorsements don’t always survive a policy renewal automatically. Some carriers renew endorsements under the same terms; others treat each renewal as a clean slate. Blanket endorsements typically fare better because they’re built into the policy structure rather than attached individually, but a carrier switch at renewal means starting fresh with new language and conditions. Every time your policy renews or you change carriers, pull your active contracts and verify the new or renewed policy still satisfies the additional insured requirements in each one.