How Does the Government Actually Print Money?

The U.S. government makes money three different ways, through three different agencies. The Bureau of Engraving and Printing manufactures paper bills. The United States Mint strikes coins. And the Federal Reserve, which most people never picture when they think about how the government prints money, creates the majority of dollars electronically by adjusting the reserve accounts commercial banks hold at the central bank. Physical cash is only a slice of the total money supply; the rest exists as digital entries on bank ledgers.

To give a sense of the physical side alone: the Federal Reserve’s 2026 print order calls for between 3.8 billion and 5.1 billion new notes, with a face value ranging from roughly $109 billion to $140 billion.1Federal Reserve Board. Federal Reserve Board – Currency Print Orders

How the Federal Reserve Decides How Much Cash to Order

Nothing gets printed until the Federal Reserve says so. Under Section 16 of the Federal Reserve Act, the Board of Governors has the authority to issue Federal Reserve notes and determine how many are needed each year.2Office of the Law Revision Counsel. 12 USC Chapter 3 Subchapter XII – Federal Reserve Notes Economists and analysts across the 12 regional Reserve Banks forecast how much physical cash the public will need over the coming year.3Federal Reserve. Who We Are

Two things drive the forecast: how many worn-out bills will be pulled from circulation and destroyed, and whether overall demand for cash is rising or falling. The Board then submits a print order to the Bureau of Engraving and Printing, broken down by denomination and expressed as a range so both agencies can adjust during the year. The 2026 order includes about 1.44 billion $1 notes, 1.17 billion $20 notes, and roughly 877 million $100 notes, with no new $2 bills ordered at all.1Federal Reserve Board. Federal Reserve Board – Currency Print Orders

How Paper Bills Are Printed

Once the order lands at the Bureau of Engraving and Printing, actual production begins. The BEP runs two facilities: one in Washington, D.C., and a larger Western Currency Facility in Fort Worth, Texas, which produces more than half the nation’s currency.4Bureau of Engraving & Printing. Fort Worth, TX Tour and Visitor Center

The paper isn’t really paper. U.S. currency is 75 percent cotton and 25 percent linen, with tiny red and blue synthetic fibers distributed throughout.5Bureau of Engraving and Printing. The Buck Starts Here: How Money is Made That fabric blend gives bills their feel, keeps them intact when wet, and makes them harder to fake before any ink hits the sheet.

Printing then happens in layers. Offset presses more than 50 feet long apply detailed background colors to both sides of a currency sheet at the same time, running at up to 10,000 sheets per hour. Every denomination except the $1 and $2 goes through this step. Operators pull sample sheets roughly every 500 impressions to check color and alignment by hand.5Bureau of Engraving and Printing. The Buck Starts Here: How Money is Made

Next comes intaglio printing, the step that gives U.S. currency its slightly raised texture. Ink is applied to an engraved steel plate, wiped from the flat surfaces so it only remains in the recessed grooves, and pressed into the paper under enormous force. Each intaglio press weighs 57 tons and prints with up to 20 tons of pressure. Backs are printed first in green ink, then the sheets sit in a vault for three days to dry before the faces are printed in black ink and dried for another three days.5Bureau of Engraving and Printing. The Buck Starts Here: How Money is Made A single work-in-process vault might hold $50 to $100 million worth of partially finished notes at any given time.

Security features go in during production. On denominations of $5 and higher, a security thread is embedded in the paper that glows a specific color under ultraviolet light, with each denomination glowing a different color. On the $10 and above, color-shifting ink in the lower-right numeral changes from copper to green when the note is tilted. The $100 adds a blue 3-D security ribbon woven directly into the paper.6U.S. Currency Education Program. Quick Reference Guide

Before any bill leaves the BEP, every sheet passes through a computer-driven inspection system that uses high-speed cameras to divide each note into 125,000 pixels, scanning for smudges, misalignments, or color problems.5Bureau of Engraving and Printing. The Buck Starts Here: How Money is Made Sheets that pass get a unique serial number and the Treasury seal, then are cut into individual notes. When a defective note is caught and replaced, the BEP prints a replacement “star note,” identifiable by a star at the end of its serial number, so the count for that serial run stays accurate.

How Coins Are Made

The United States Mint is the sole manufacturer of the nation’s legal tender coinage.7United States Mint. About the United States Mint Circulating coins come out of the Philadelphia and Denver facilities. San Francisco and West Point handle commemorative coins, proof sets, and bullion products rather than everyday change.8United States Mint. Coin Production

Production starts with long coils of metal fed into blanking presses that punch out round discs called planchets. The blanks are heated in an annealing furnace to soften the metal, washed, dried, and run through a milling machine that raises a rim around each edge. High-pressure presses then stamp the front and back designs at the same time, using between 35 and 100 metric tons of pressure depending on the denomination.8United States Mint. Coin Production The Philadelphia Mint alone can strike over 47,000 coins per minute when all 63 of its presses are running.

Each denomination uses a different metal recipe. Quarters and dimes are clad coins, a nickel-copper alloy (8.33% nickel, 91.67% copper) layered over a pure copper core. Nickels are 75% copper and 25% nickel. Pennies, before production ended, were 97.5% zinc with a thin copper plating.9United States Mint. Coin Specifications

The End of the Penny

In late 2025, the federal government stopped manufacturing new pennies. The Treasury Secretary exercised authority under 31 U.S.C. §§ 5111 and 5112 to cease production, citing the need to better steward taxpayer dollars.10U.S. Department of the Treasury. Penny Production Cessation FAQs Producing a single penny cost 3.69 cents, so the government lost money on every one it made. Nickels have a similar problem at 13.8 cents each to produce, though they remain in circulation. Existing pennies are still legal tender and will circulate until they wear out of the supply naturally.

How the Federal Reserve Creates Electronic Money

Physical cash is a fraction of the total money supply. Most dollars exist as electronic entries on bank ledgers, and the Federal Reserve creates them through open market operations.11Federal Reserve Board. Open Market Operations

Here’s how it works. When the Federal Open Market Committee decides to expand the money supply, the Fed’s trading desk buys government securities, typically Treasury bonds, from large financial institutions known as primary dealers. The Fed doesn’t send a check. It credits the selling bank’s reserve account at the Federal Reserve with new funds. That deposit didn’t exist before the transaction; it was created on the spot. The bank’s available reserves increase instantly, giving it more capacity to lend to businesses and consumers.12Federal Reserve Bank of St. Louis. What Are Open Market Operations? Monetary Policy Tools, Explained

The Fed can also reverse the process, selling securities to pull reserves back out of the banking system and tighten the money supply. No printing press is involved in either direction. When you receive a direct deposit, swipe a debit card, or wire money to someone, you’re moving electronic dollars that trace back to this reserve system. The balance in your checking account is ultimately a claim on those digital reserves.

One boundary worth noting: the U.S. has explicitly decided not to create a government-backed digital currency for consumers. In 2025, an executive order halted work on a retail central bank digital currency. The Fed continues participating in international research on wholesale cross-border payment systems, but a digital dollar you could hold in a government-issued wallet is off the table for now.

How New Currency Reaches the Public

Finished bills and coins don’t go straight from the factory to your wallet. They first move to the 12 regional Federal Reserve Banks, which serve as the central distribution hubs for the nation’s cash supply.3Federal Reserve. Who We Are New currency sits in guarded vaults until a commercial bank orders it.

When your local bank branch runs low on twenties or needs to restock its ATMs, it places an order through the Federal Reserve’s cash services system. The Reserve Bank ships the cash by armored carrier, and the commercial bank pays for it by having its electronic reserve account debited by the same amount. This is a critical detail. The physical cash doesn’t add to the money supply. It converts electronic reserves that already exist into paper and metal customers can hold. Total money in the system stays the same; it just changes form.

From there, the cash reaches you at an ATM or a teller window. Retailers deposit their excess cash back into their bank accounts, the bank returns surplus bills to the Fed, and the cycle continues.

Why the Government Keeps Printing Year After Year

A large share of each year’s print order isn’t new money at all. It’s replacement for bills that have worn out. A $1 note lasts an average of about 7 years. A $100 bill, which gets handled far less, lasts roughly 24 years. Denominations in between fall on a spectrum:13Federal Reserve. How Long is the Lifespan of U.S. Paper Money?

  • $5: about 5.8 years
  • $10: about 5.7 years
  • $20: about 11.1 years
  • $50: about 14.9 years

When commercial banks deposit cash at their local Federal Reserve Bank, every note runs through high-speed equipment that checks for wear, dirt, limpness, and tears. Notes that fail the fitness test are pulled from circulation and shredded. In 2018 alone, Federal Reserve cash offices generated over 5,200 tons of shredded currency, about 86 percent of which was recycled into compost, electricity generation, or cement production depending on the facility.14Federal Reserve Bank of Boston. When Bills Go Bad: What Happens When Cash is No Longer Fit for Commerce? The destroyed notes get counted into the next year’s print order, keeping the total supply of circulating cash roughly stable.