A Contractor Controlled Insurance Program, or CCIP, works by replacing the patchwork of individual subcontractor policies on a construction project with one master policy that the general contractor buys and administers. Every enrolled party — the general contractor and its subcontractors — works under the same liability and workers’ compensation coverage for everything they do on that specific jobsite. Subcontractors remove the insurance cost from their bids in exchange, and the general contractor’s program pays claims that arise from on-site work. A separate but similar structure, the Owner Controlled Insurance Program (OCIP), does the same thing but is purchased and run by the project owner rather than the general contractor.1Amwins. The Differences Between General Liability and General Liability Wrap Policies
What the Master Policy Covers
The CCIP bundles several coverage types into one tower. Commercial General Liability forms the base, covering third-party bodily injury and property damage inside the project boundaries, including premises and operations, contractual liability, and products and completed operations.1Amwins. The Differences Between General Liability and General Liability Wrap Policies Workers’ compensation and employer’s liability are usually folded in to handle medical costs and lost wages for employees hurt on the job. An umbrella or excess layer sits on top to extend limits beyond the primary policies.
The one geographic rule to remember: everything is tied to the designated project site. If a subcontractor’s crew damages something at their own shop or on another job, the CCIP carrier does not pay.
Who Gets Enrolled
The general contractor and its direct subcontractors are the core enrolled parties, and most programs extend enrollment down to lower-tier subcontractors as well. Off-site vendors, suppliers who only deliver materials, and certain specialty consultants are typically left out. Some programs also set a minimum contract value below which enrollment isn’t worth the paperwork.
Safety record matters at the door. Many general contractors require an Experience Modification Rate (EMR) of 1.0 or lower as a condition of enrollment, meaning the subcontractor’s past claims experience is no worse than the industry average. For large-value contracts, the cutoff is sometimes tightened to 0.90. A subcontractor whose EMR runs higher may be asked to adopt extra safety protocols, accept closer scrutiny, or in some cases be kept out of the wrap-up entirely.
How a Subcontractor Enrolls
Enrollment runs through a wrap-up administrator, usually a third-party firm the general contractor hires to manage the program’s enrollment, auditing, and compliance. The subcontractor submits a data package through the administrator’s portal or the general contractor’s office. The core documents are:
- Payroll estimates broken down by NCCI workers’ compensation classification codes for the project’s duration.
- The subcontractor’s current EMR.
- The exact dollar value of the subcontract.
- Three to five years of historical loss runs.
- Copies of the subcontractor’s current insurance declarations and rate pages for each coverage type.
Accuracy on the payroll classifications and contract value matters more than most subcontractors realize. The final audit at project close will catch discrepancies between what was estimated and what actually happened, and the subcontractor pays the difference.
Once the administrator audits the package and approves it, the subcontractor receives a Certificate of Insurance naming them as insured under the CCIP, along with the program’s procedures manual. That certificate is proof of coverage and, practically, authorization to put crews on the ground. Work should not start without it.
Bid Credits and the Insurance Cost Worksheet
Because the wrap-up provides the insurance the subcontractor would otherwise buy, the subcontractor has to strip those costs out of their bid. This is the bid deduct, and it is where most financial disputes on wrap-up projects start.
Three bidding structures are common. A net bid excludes insurance from the start. A net bid with add alternate shows the base price without insurance plus a separate line for what insurance would have cost. A gross bid with deduct alternate includes insurance in the price and then backs it out through a deductive change order. Which method applies is spelled out in the bid documents and the wrap-up manual.
The calculation itself runs through an Insurance Cost Worksheet (ICW). The ICW quantifies what the wrap-up coverages would have cost under the subcontractor’s own corporate program, using the subcontractor’s declarations and rate pages. Four areas tend to generate arguments:
- Whether the credit uses estimated or actual payroll and contract values. Many programs include a contractual true-up that reconciles the credit at closeout against actual numbers.
- Large deductibles or self-insured retentions, which require five years of exposure and loss data so the administrator can give fair credit for the deductible savings the subcontractor would have realized.
- Flat-charge umbrella policies, where the sponsor may convert the flat premium to a composite rate by dividing it by sales volume.
- Overhead and profit, which the subcontractor would have loaded onto insurance costs and which gets deducted along with the direct cost.
Understating insurance cost on the ICW looks like free margin, but the administrator reconciles the worksheet against the declarations pages and will adjust the credit unilaterally if the numbers don’t line up.
What a CCIP Does Not Cover
Enrollment is not a substitute for the subcontractor’s own corporate insurance program. Several meaningful exposures sit outside a standard wrap-up:
- Commercial auto liability. Vehicle-related claims, whether driving to the site or hauling materials, are not covered.
- Professional liability. Design errors, engineering mistakes, and construction management failures are excluded from the CGL that forms the CCIP base.
- Pollution liability. The CGL carries an absolute pollution exclusion, so chemical releases, soil contamination, and groundwater damage from the subcontractor’s work are not covered. A separate Contractors’ Professional and Pollution Liability policy handles those losses, including cleanup and transportation-related events.
- Off-site operations. Prefabrication at the subcontractor’s own shop or warranty work at a different location falls outside the geographic boundary.
Before trimming any limits on their corporate policies, subcontractors should confirm with their broker exactly which coverages the specific program provides.
Claim Reporting and On-Site Incidents
When someone is injured or property is damaged on-site, the subcontractor notifies both the project safety manager and the CCIP administrator the same day, with written notice usually required within 24 hours. Late reporting can jeopardize coverage, and administrators enforce the deadline because delayed claims are harder to investigate.
The written report is typically a First Report of Injury for workers’ compensation or a general incident report for property damage. The CCIP carrier then takes the investigation from there, running interviews, reviewing site footage, and evaluating medical or property loss.
Many programs route injured workers to a pre-selected panel of doctors or a central medical facility. That isn’t only a cost measure; it produces consistent medical documentation and cuts down on disputes about treatment. The carrier pays medical bills and settlements directly from the master policy. Individual subcontractors do not pay covered on-site claims out of their own policies.
The Final Audit at Closeout
The insurance credit set at enrollment rests on estimated payroll and contract values. When the job finishes, the administrator audits those estimates against what actually happened. The reconciliation can go either way. If actual payroll ran higher than the estimate, the credit grows and the subcontractor owes additional money for the extra exposure. If actual payroll came in lower and the program allows two-way adjustments, the subcontractor gets a refund.
Not all programs allow refunds. Some wrap-up manuals specify a one-way audit where the subcontractor can owe more but never receive money back. Read the closeout provisions in the procedures manual before signing the subcontract. On a multi-year project with fluctuating staffing, the gap between a one-way and two-way audit can be significant.
Completed Operations Coverage After the Job Ends
Construction defects often surface years after the last worker leaves. Roof membranes leak, foundations settle, waterproofing fails. The CCIP’s completed operations coverage extends protection beyond the construction period to address those claims.
Most wrap-up programs tie the tail to the applicable statute of repose, which in the majority of states runs about ten years after substantial completion.2AGC.org. Operations Versus Completed Operations Coverage Under Wrap-Up Insurance Policies Statutes of repose vary by jurisdiction, with most falling between seven and fourteen years, and the policy is typically endorsed to match that duration.
Confirm the completed operations period before leaning on it. If the CCIP’s tail is shorter than the local statute of repose, the subcontractor may need supplemental coverage through their own corporate program. It is a small detail at enrollment and a costly one to discover during a defect lawsuit five years in.