A solar lease works like renting the equipment on your roof: a company installs and owns the panels, you pay a fixed monthly fee for 20 to 25 years, and you consume the electricity the system produces. The leasing company handles maintenance and keeps the tax incentives tied to ownership, while you get solar power with no upfront hardware cost and, in most months, a combined bill lower than what you were paying the utility alone.
Who Owns the Panels
Every piece of hardware on your roof belongs to the leasing company, from the panels to the inverter to the mounting brackets. You never hold title. That single fact drives most of the rest of the arrangement.
Because the company is the legal owner, it captures the financial incentives attached to the equipment. The federal energy investment tax credit, accelerated depreciation, and any state-level incentives flow to the lessor.1US EPA. Understanding Third-Party Ownership Financing Structures for Renewable Energy Those benefits are a big reason the company can price your monthly payment close to grid rates. In effect, federal and state subsidies cover part of the company’s hardware cost, and a slice of that savings reaches you as a lower monthly rate.
The flip side: if you could have used those tax credits yourself, you’ve handed them away. A lease tends to make sense when you want the savings without the capital outlay, when your tax liability is too low to absorb the credits anyway, or when you’d rather not deal with aging equipment on your own books.
What You Pay Each Month
The monthly payment on a standard residential system generally runs between $80 and $150, depending on system size, your location, and the company’s pricing. Unlike a solar loan, this payment never builds equity. You’re renting hardware for the length of the contract, and the fee buys you the right to use whatever the panels generate.
Many contracts include an escalator clause that raises the payment by a fixed percentage each year, usually 1% to 3%. A lower escalator means a higher starting payment; a higher escalator lets the company advertise a low rate in year one that climbs over time. On a 2% annual escalator, a $100 payment grows to roughly $148 by year 20. The pitch is that utility rates also rise, so your lease should still beat the grid. If utility rates in your area stay flat or fall, an escalating lease payment can end up costing more than grid electricity in later years.
Before signing, ask whether the contract uses a fixed rate or an escalator, and if it escalates, work out what you’ll owe in years 15, 20, and 25. The U.S. Treasury warns consumers to watch for “promotional rates or short periods of relatively low payments that mask the higher bills you could owe for the remaining years.”2U.S. Department of the Treasury. Consumer Advisory: Before You Sign a Solar Lease Agreement
Lease or Power Purchase Agreement
Solar leases and power purchase agreements (PPAs) are both third-party ownership deals, and salespeople use the words interchangeably. The payment mechanics differ in a way that matters.
Under a lease, you pay a flat monthly amount regardless of how much electricity the panels actually produce. Budgeting is simple, but you pay the same in a rainy month as in a sunny one. Under a PPA, you pay a per-kilowatt-hour rate for whatever the system generates. Your bill moves with the seasons, and if the system underperforms, your bill drops automatically.1US EPA. Understanding Third-Party Ownership Financing Structures for Renewable Energy
So if the system falls short of projections, a PPA puts the financial hit on the provider and a lease leaves it with you. Some lease contracts include a production guarantee that credits you when output falls below a specified threshold, but not all do. If yours doesn’t, you absorb the shortfall.
Maintenance, Repairs, and Insurance
Because the company owns the hardware, it carries the risk of equipment failure. If an inverter dies or a panel cracks, the company covers parts and labor. Most providers also monitor system performance remotely and send technicians when output drops below expected levels. This is one of the real advantages of leasing: you don’t need to budget for a $2,000 inverter replacement in year 12.
Your side of the bargain is lighter but real. You’re expected to keep the panels reasonably clear of debris, trim trees that shade the array, and let technicians onto the property for inspections and repairs. Some contracts impose penalties if you block access or let vegetation grow over the panels, because both cut into the output the company is counting on.
Insurance deserves a direct question before you sign. If panels are leased, your homeowner’s policy may not cover them, since you don’t own them. Some leasing companies carry their own coverage for the equipment. Others expect you to add the panels to your existing policy or buy a rider. The agreement should spell out who insures the system against storm damage, theft, and other hazards. If it doesn’t, get that in writing.
How the Electric Bill Changes
Electricity from the panels flows directly into your home. When the system produces more than you’re using, the surplus goes to the grid. In states with net metering, your utility credits your account for exported energy, and those credits offset what you draw from the grid at night or during cloudy stretches.
You end up with two bills each month: the fixed fee to the leasing company and the utility charge for whatever the panels didn’t cover. In a good month, the utility bill might be close to zero; in winter or during heavy use, it climbs. The whole financial case rests on the two bills together coming in under what you used to pay for grid electricity alone.
Net metering rules vary by state and have been shifting. Many states now credit exported energy at less than the full retail rate, which reduces the value of surplus production. Check your state’s current rules before signing. If your utility uses a lower export rate, the savings projections the salesperson shows you may be based on assumptions that don’t match your actual billing.
Selling the House Before the Lease Ends
This is where most solar lease problems happen. When you sell before the term is up, you generally have two choices: transfer the lease to the buyer or buy out the remaining contract yourself.
A transfer requires the buyer to accept the contract and meet the leasing company’s credit requirements. Most transfers go through when the buyer understands the arrangement up front. Some buyers don’t want to inherit an 18-year energy obligation, and some can’t qualify. If the buyer refuses, you’re left buying out the lease yourself or dropping the sale price to make the deal work.
Buyouts are typically based on the fair market value of the equipment or the remaining lease payments, depending on what the contract specifies. On a mid-term buyout, costs can run from several thousand dollars up to $10,000 or more, depending on system size and years remaining.
There’s also a title wrinkle to know about. Many leasing companies file a UCC-1 fixture filing with the county, which is a public notice that the solar equipment on your property belongs to someone else. It isn’t technically a lien on your home, but it shows up in title searches, and some mortgage lenders treat it as a potential cloud on title that can delay refinancing or complicate a sale.3Freddie Mac. Solar Panel FAQ The leasing company can usually provide a subordination agreement or amend the filing to cover only the solar equipment, but the coordination can add weeks to closing. Look for language in the lease about the company’s obligation to cooperate on subordination requests.
What Happens If the Roof Needs Work
If your roof needs replacement during a 20-year lease, the panels have to come off, the roof gets repaired, and the panels go back on. The industry calls this a remove-and-reinstall, and it’s one of the bigger surprises for homeowners who didn’t read the fine print.
Some contracts include the service at no additional charge. Others charge a fee that can run into the thousands for a large residential array. Find the clause that addresses roof work and understand exactly who pays. If the lease puts the cost on you, factor that into your math, especially if your roof is already 10 or 15 years old when the panels go up.
What Happens When the Lease Ends
When the contract expires, you’ll typically choose from three options:
- Renew the lease, often at a reduced rate since the equipment is fully depreciated.
- Purchase the system at its fair market value, which after 20 to 25 years of depreciation is usually a fraction of the original cost. The purchase price formula should be spelled out in your contract’s buyout clause.
- Have the system removed. Most contracts require the company to handle removal and repair any roof penetrations, but verify this in your agreement. Some companies would rather give you the system than pay for removal, because aging panels are worth less than the cost of sending a crew to pull them off.
End-of-lease terms are often negotiable, especially when the company is weighing whether it’s cheaper to reclaim equipment or walk away. Don’t accept the first offer without checking what the contract actually requires.
Your Right to Cancel
If a solar lease is sold at your home, including by a door-to-door salesperson, the federal Cooling-Off Rule gives you three business days to cancel without penalty.4Federal Trade Commission. Cooling-off Period for Sales Made at Home or Other Locations The seller must give you a cancellation form at the time of sale. Some states extend the window beyond three days, and some providers voluntarily offer longer penalty-free cancellation periods, so check both your state’s rules and the contract itself.
The Treasury has also flagged high-pressure tactics in the solar sales channel, including customers not being given a chance to review the full contract before signing and a lack of clear information about removal and transfer costs.2U.S. Department of the Treasury. Consumer Advisory: Before You Sign a Solar Lease Agreement If a salesperson pushes you to sign the same day, that’s a reason to slow down.