Banks create money by making loans. When a bank approves a mortgage, a car loan, or a business line of credit, it does not hand over cash from a vault or move funds out of another customer’s savings account. It types the loan amount into the borrower’s deposit account and records a matching loan on its own books. Those new deposit dollars did not exist a moment earlier. That is how banks create money, and it is how most of the money circulating in the U.S. economy came into being: physical currency is a small slice of the total, and bank-created deposit balances are the rest.
Loans Create Deposits, Not the Other Way Around
The familiar textbook story has banks collecting deposits, setting a slice aside, and lending the leftover. The actual sequence runs in reverse. A bank approving a $300,000 mortgage does not locate $300,000 sitting in someone else’s account and redirect it. It credits $300,000 to the borrower’s account and simultaneously records a $300,000 loan asset. The borrower now has spendable money that nobody had to give up. The Bank of England stated this directly in a 2014 paper, writing that banks “do not act simply as intermediaries, lending out deposits that savers place with them, nor do they ‘multiply up’ central bank money to create new loans and deposits.”1Bank of England. Money Creation in the Modern Economy The loan creates the deposit.
When the borrower spends the $300,000 on a house, the seller’s bank account grows by $300,000. No physical currency moved. The seller can spend those dollars just like any other money in their account. The banking system has added $300,000 to the money supply through a ledger entry. When the borrower repays the loan over the following years, each payment extinguishes some of the money the loan originally created.
The Multiplier Effect Across the Banking System
One loan is only the start. The home seller deposits that $300,000, and the receiving bank now holds a new deposit it can draw on to support its own lending. Say that bank writes a $250,000 business loan. That loan creates another new deposit. The business spends the money, the recipient deposits it somewhere, and the next bank can lend again. Each round of lending creates new deposits, which seed the next round.
Across thousands of loans, a modest initial injection of funds can support a much larger total volume of deposits. The old textbook version tied this money multiplier directly to the reserve requirement: a 10 percent reserve rule meant that a dollar of fresh reserves could, in theory, support ten dollars of deposits. The real-world version is messier. Banks do not always lend to the maximum, borrowers hold cash, and some money leaks out of the banking system. The cumulative effect is still large. M2, the measure that includes checking accounts, savings balances, and similar liquid holdings, far exceeds the stock of physical currency or central bank reserves.
Why Reserve Requirements No Longer Limit Lending
For decades, reserve requirements were the most visible check on this process. Under the Federal Reserve Act, the Board of Governors has authority to require depository institutions to hold reserves against transaction accounts.2Office of the Law Revision Counsel. 12 USC 461 – Reserve Requirements Banks met the requirement with vault cash or a balance at a Federal Reserve Bank, and the ratios were set out in Regulation D.3eCFR. 12 CFR Part 204 – Reserve Requirements of Depository Institutions (Regulation D)
Before March 2020, large banks faced a reserve ratio of up to 10 percent on net transaction accounts. On March 15, 2020, the Board reduced all reserve requirement ratios to zero, effective March 26, 2020. That action eliminated reserve requirements for every depository institution in the country.4Federal Reserve Board. Reserve Requirements The phrase “fractional reserve banking” is still common, but it now describes a historical arrangement rather than a current binding rule. Reserve ratios have not constrained U.S. bank lending since 2020.
What Actually Limits How Much Money Banks Can Create
If reserve requirements are zero, something else has to prevent banks from creating money without end. Several things do.
Capital Requirements
Every loan is an asset on a bank’s balance sheet, and riskier assets demand more capital behind them. Banks must maintain a minimum Common Equity Tier 1 capital ratio of 4.5 percent of risk-weighted assets. Large banks face additional layers: a stress capital buffer of at least 2.5 percent set by annual stress tests, and, for globally significant firms, a surcharge of at least 1.0 percent on top of that.5Federal Reserve Board. Annual Large Bank Capital Requirements Capital exists to absorb unexpected losses and protect depositors if a loan portfolio sours.6Federal Reserve. Supervisory Policy and Guidance Topics – Capital Adequacy These ratios are the real ceiling on money creation. A bank that wants to make more loans needs enough equity to back them, and a bank running low on capital has to raise more, sell assets, or stop lending.
Prompt Corrective Action
Regulators sort banks into capital categories, and crossing a threshold triggers consequences. A Tier 1 risk-based capital ratio of 8 percent or higher is “well capitalized.” Below 6 percent is “undercapitalized” and activates mandatory supervisory action. Below 4 percent is “significantly undercapitalized,” and a tangible equity to total assets ratio of 2 percent or less is “critically undercapitalized,” which may lead to receivership.7eCFR. Part 6 – Prompt Corrective Action Banks that violate safety and soundness standards can face civil money penalties for knowing violations that cause substantial losses.8Office of the Law Revision Counsel. 12 USC 504 – Civil Money Penalty
Liquidity Rules
Capital rules ask whether a bank can absorb losses. Liquidity rules ask whether it can survive a short-term cash crunch. The Liquidity Coverage Ratio requires large institutions to hold enough high-quality liquid assets to cover 100 percent of projected net cash outflows over a 30-day stress period.9Federal Register. Liquidity Coverage Ratio: Liquidity Risk Measurement Standards The Net Stable Funding Ratio takes a longer view, requiring available stable funding to equal or exceed required stable funding on an ongoing basis.10eCFR. Subpart K – Net Stable Funding Ratio Together these rules keep banks from funding long-term loans with short-term deposits that could run out the door during a panic.
How the Federal Reserve Influences the Pace of Money Creation
Banks create the money. The Federal Reserve shapes the conditions in which they do it. Under 12 U.S.C. ยง 248, the central bank supervises financial institutions and monitors monetary and credit conditions.11Office of the Law Revision Counsel. 12 USC 248 – Enumerated Powers Three main tools matter.
The Federal Funds Rate Target
The Federal Open Market Committee sets a target range for the federal funds rate, the interest rate banks charge each other for overnight loans of reserves.12Federal Reserve Board. The Fed Explained – Monetary Policy Higher borrowing costs make loans more expensive for consumers and businesses, which cools credit demand and slows the pace of new deposit creation. Cuts work in the opposite direction.
Interest on Reserve Balances
The Fed now hits its rate target mainly by paying interest on reserve balances banks hold at Federal Reserve Banks.13Federal Reserve Board. Interest on Reserve Balances Because a bank can earn a guaranteed return by parking money at the Fed, it will not lend to another bank at a lower rate. This puts a floor under short-term rates. It is also the mechanism that replaced the old scarcity-of-reserves approach. Rather than squeezing the quantity of reserves to push rates up, the Fed pays enough interest to hold rates where it wants them even when reserves are abundant.
Open Market Operations and Quantitative Easing
The Fed buys and sells securities to adjust the volume of reserves in the banking system. Buying a Treasury bond from a bank credits that bank’s reserve account at the Fed, injecting new money into the system. Selling drains it.14Federal Reserve Board. Policy Tools – Open Market Operations During crises the Fed has scaled this up massively through quantitative easing, buying large volumes of government bonds and mortgage-backed securities to push down long-term rates when short-term rates are already near zero. These purchases took the Fed’s balance sheet from roughly $800 billion before the 2008 financial crisis to about $6.5 trillion by late 2025.15The Federal Reserve. The Central Bank Balance-Sheet Trilemma The Fed has since been letting maturing bonds roll off without reinvesting.
What This Means for Prices and the Dollars You Already Hold
More money in the economy does not automatically make anyone richer. If the money supply grows faster than the output of goods and services, prices tend to climb. The same process that funds mortgages, payrolls, and business expansion can erode the purchasing power of every dollar already in circulation.
The connection showed up starkly during and after the COVID-19 pandemic. M2 grew at a record year-over-year rate of 26.9 percent in February 2021, well above anything seen during the quantitative easing programs of 2008 through 2015 or the inflationary periods of the 1970s and 1980s.16Federal Reserve Bank of St. Louis. The Rise and Fall of M2 Inflation began climbing about a year later and peaked in mid-2022, roughly 18 months after M2 peaked. That lag is consistent with Milton Friedman’s observation that money supply changes affect prices with a delay of roughly six months to two years.
The relationship is not always that tidy. The large expansion of the monetary base during the 2008 to 2015 QE programs did not produce unusual M2 growth or inflation. Banks held much of those reserves rather than lending them, so the new reserves never turned into deposits circulating in the broader economy. Money creation only pushes prices when the money actually gets spent.
What Happens to Your Deposit if the Bank Fails
If banks are constantly lending out the money you deposit, the fair question is what happens to your balance if the bank goes under. Federal law provides a backstop. The FDIC insures deposits up to $250,000 per depositor, per insured bank, for each ownership category.17Office of the Law Revision Counsel. 12 USC 1821 – Insurance Funds A joint account held by two people gets $500,000 in coverage because each owner’s share counts separately. Trust accounts with named beneficiaries can extend coverage further, up to $250,000 per beneficiary with a maximum of $1.25 million per owner.18FDIC.gov. Your Insured Deposits Even though your bank has lent most of your deposit out to other borrowers, the full balance up to the insured limit remains available to you. Deposit insurance is what lets the entire money creation system function without requiring you to track whether your bank is making good loans.