Global Turnover: Calculation, Merger Thresholds, and Tax Rules

Global turnover is the total revenue a company and all of its subsidiaries generate worldwide in a reporting period, measured before costs or taxes are subtracted. It is a gross figure, not a profit figure, and it treats the parent company and everything it controls as a single economic unit. Regulators in several fields have landed on this one number as the best measure of a multinational’s economic weight, which is why it decides whether a merger needs clearance, how large a data privacy fine can go, and whether a group falls under the new 15% global minimum tax.

How the Number Is Calculated

The starting point is consolidation. The parent company’s accounts are combined with those of every entity it controls, which usually means holding more than half the voting rights or having the power to direct the subsidiary’s financial and operating decisions. The result is one set of financial statements that treats the group as a single business.

Sales between companies in the same group drop out. If a parent sells components to its own subsidiary, that internal transfer is not real revenue from the outside world, so it is removed. Only sales to unrelated third parties count. This keeps a group from inflating its turnover by moving money between its own entities.

Because a multinational earns in dozens of currencies, every local amount has to be converted into a single reporting currency. Most regulatory frameworks tell you which exchange rate to apply. The common approach is the average rate over the reporting period rather than the closing rate on the last day of the year, which smooths out short-term currency swings and produces a figure closer to actual business activity.

Joint ventures do not always count the same way. Under the OECD’s Pillar Two rules, revenue from a joint venture where the company holds at least 50% but accounts for the investment using the equity method is excluded when testing whether the group hits the €750 million threshold. The joint venture only falls under the rules once the parent group’s own revenue independently crosses the line. Different regulatory regimes treat joint ventures and minority stakes differently, so a company sitting close to any threshold needs to check which definition of turnover applies to that specific rule.

One point worth keeping in mind: a company can post tens of billions in turnover and still show a loss after investment and operating costs. Regulators focus on the gross figure because it measures market presence and economic reach, not current profitability.

Merger Control Thresholds

Global turnover is the gatekeeper for merger review. Competition authorities set financial thresholds, and if a deal crosses them, the parties must notify the regulator and wait for clearance before closing. Skipping that step can trigger heavy fines and a forced unwinding of the transaction.

European Union

The European Commission takes jurisdiction over a merger through two alternative tests, both anchored to worldwide turnover. Under the first, the combined worldwide turnover of all merging companies must exceed €5 billion, and at least two of them must each generate more than €250 million in revenue within the EU. Under the second, the worldwide total must exceed €2.5 billion, with the parties generating a combined total above €100 million in each of at least three EU member states.1European Commission. Merger Procedures

The structure gives the Commission reach beyond Europe. A technology company headquartered in Asia with modest European sales can still trigger EU review if its worldwide revenue is large enough and the target has sufficient EU presence.

United States

U.S. antitrust law uses the Hart-Scott-Rodino (HSR) Act, which is structured differently but asks a similar question. For 2026, the minimum size-of-transaction threshold is $133.9 million. Deals valued above that figure trigger a mandatory pre-merger filing unless an exemption applies.2Federal Trade Commission. New HSR Thresholds and Filing Fees for 2026

For transactions valued between $133.9 million and roughly $535.6 million, a size-of-person test also applies. One party must have at least $26.8 million in assets or net sales, and the other must have at least $267.8 million. Deals valued above $535.6 million require filing regardless of the parties’ size.3Federal Trade Commission. Steps for Determining Whether an HSR Filing Is Required These thresholds are adjusted annually based on changes in gross national product, so the current numbers need to be checked when planning an acquisition.

Filing fees scale with deal size. The smallest reportable transactions carry a $35,000 fee, while transactions worth $5.869 billion or more carry a $2,460,000 fee.2Federal Trade Commission. New HSR Thresholds and Filing Fees for 2026 Those are separate from the legal and advisory costs of preparing the filing.

Data Privacy Fine Ceilings

In data privacy law, global turnover does not decide whether a company has to file something. It sets the ceiling on how much a regulator can fine the company for a violation. The EU’s General Data Protection Regulation made this approach famous.

The GDPR has two tiers of maximum fines, both calculated against the violating company’s total worldwide annual turnover from the prior financial year. For the most serious violations, including breaches of core data processing principles and unlawful international data transfers, the ceiling is €20 million or 4% of global turnover, whichever is higher. A lower tier covers more technical obligations such as breach notification procedures and data protection impact assessments, with a ceiling of €10 million or 2% of global turnover, whichever is higher.4General Data Protection Regulation (GDPR). Art. 83 GDPR General Conditions for Imposing Administrative Fines

The “whichever is higher” phrasing is what gives the regime its weight at the top of the market. For a small business the flat euro amount sets the ceiling. For a company earning $100 billion a year, 4% means a theoretical maximum of $4 billion.

A detail that matters for group structures: the EU’s highest court has confirmed that “undertaking” here means the entire corporate group, not just the subsidiary that committed the violation. The ceiling is calculated on the parent’s consolidated global turnover. Routing data processing through a small subsidiary with minimal revenue does not shrink the maximum fine.

The Global Minimum Tax

Global turnover is the only entry test for the OECD’s Pillar Two framework, which imposes a 15% minimum effective tax rate on large multinationals. If a group’s consolidated revenue reaches €750 million or more in at least two of the four preceding fiscal years, the entire group is in scope.5Organisation for Economic Co-operation and Development (OECD). Global Minimum Tax Below that line the rules do not apply at all. The threshold was set high on purpose, to keep smaller and mid-sized businesses out of what is a genuinely heavy compliance regime.

Once a group crosses the line, it has to calculate its effective tax rate in every jurisdiction where it operates. If the rate anywhere falls below 15%, the group owes a top-up tax equal to the gap between its actual rate and the 15% floor.5Organisation for Economic Co-operation and Development (OECD). Global Minimum Tax The calculation runs through a specially defined “GloBE Income” figure derived from financial accounting profit after a series of adjustments.

The first GloBE Information Returns are expected to be due on June 30, 2026.6Organisation for Economic Co-operation and Development (OECD). Compilation of Additional GloBE Information Reporting Requirements A transitional safe harbor is available through fiscal years beginning on or before December 31, 2027, allowing qualifying groups to rely on existing country-by-country reporting data instead of running the full GloBE calculation in every jurisdiction. For groups on a calendar fiscal year, that safe harbor covers 2024 through 2026. A group that sits close to the €750 million line should monitor its consolidated turnover continuously, because falling below the threshold for a sufficient period allows the group to exit the regime.

Digital Services Taxes

A growing number of countries have adopted Digital Services Taxes targeting revenue from online advertising, marketplace platforms, and user data sales. These taxes almost universally use global turnover as the entry threshold. The dominant pattern is a €750 million worldwide revenue floor combined with a much lower domestic revenue requirement. France, Italy, Spain, Austria, Turkey, and Canada all follow this structure. The United Kingdom sets its global threshold at £500 million.

The domestic prong is what gives DSTs their local reach. A company usually has to earn a specified minimum from local users before the tax applies. That domestic threshold is typically far lower than the global one, often in the range of €5 million to €25 million. The combination means only the largest digital multinationals pay, but they pay on revenue attributed to local customers whether or not they have any physical presence in the country.

For a company already tracking its global turnover for Pillar Two, DST compliance adds another layer. The €750 million figure shows up in both regimes, but the definitions of qualifying revenue differ. DSTs target only revenue from specific digital activities, while Pillar Two looks at total consolidated revenue from all sources. A group can be in scope for Pillar Two but below a DST threshold if most of its revenue is non-digital, or the other way around if its digital revenue is concentrated in a particular country.

Why One Number Carries So Much Weight

The convergence around global turnover is not an accident. Tax authorities, competition regulators, and data protection agencies all face the same underlying problem: a multinational can structure its operations to shrink its visible footprint in any single jurisdiction. Profits can be booked in a low-tax country, data processing can be routed through a small subsidiary, and a merger’s local effects can be minimized on paper. Global turnover cuts through those structures by measuring the group’s total economic activity worldwide, before any allocation.

For large multinationals, the practical result is that global turnover has become a permanent compliance variable rather than a line item in the annual report. It decides which merger filings are mandatory, what the maximum data privacy fine can be, whether the global minimum tax applies, and which digital services taxes are owed. A consolidation error, a miscategorized joint venture, or the wrong exchange rate methodology can push a group across a threshold boundary with real regulatory consequences.