Fannie Mae Form 1004D is a one-page appraiser’s report that does one of two jobs: it updates an older appraisal that has aged past four months, or it certifies that repairs, renovations, or construction flagged in the original appraisal have actually been completed. Freddie Mac uses the same document under the name Form 442.1Freddie Mac. Appraisal Update and/or Completion Report – Form 442 / Form 1004D If your closing is dragging past the original appraisal date, or your lender issued the appraisal “subject to” work being finished, this is the form that bridges the gap.2Fannie Mae. B4-1.2-05 – Requirements for Verifying Completion and Postponed Improvements
What the Form Actually Covers
The page is split into two parts. Part A handles appraisal updates when the original report has aged. Part B handles completion certifications when the property had unfinished work at the time of the first appraisal. A single transaction can trigger Part A, Part B, or both, depending on what the lender needs cleared before funding.
When Part A Is Required
An appraisal update becomes necessary when the effective date of the original appraisal is more than four months old but less than twelve months old at the time of the note and mortgage.3Fannie Mae. B4-1.2-04 – Appraisal Age and Use Requirements The clock runs from the effective date in the original report, not the delivery date, and it applies to both existing and proposed construction.
To complete Part A, the appraiser inspects the exterior from the street, reviews current market data, and decides whether the property’s value has declined since the original date. A photograph of the front of the property is required.4Fannie Mae. B4-1.2-01 – Appraisal Report Forms and Exhibits No interior inspection is required. The update itself must also fall within four months of the note date, so timing has to work on both ends.3Fannie Mae. B4-1.2-04 – Appraisal Age and Use Requirements
If the Appraiser Marks a Value Decline
The consequence is firm. If the appraiser checks the box indicating the value has declined, the lender must order a completely new appraisal.3Fannie Mae. B4-1.2-04 – Appraisal Age and Use Requirements There is no option to adjust the number down informally. A fresh appraisal starts over, which means more cost and more delay, and the new value drives the loan-to-value ratio. A lower number can force a larger down payment, add private mortgage insurance, or, in the worst case, end the loan if the property no longer supports the mortgage amount.
If the appraiser reports no decline, the lender proceeds on the existing loan terms and no further fieldwork is needed.3Fannie Mae. B4-1.2-04 – Appraisal Age and Use Requirements
The Twelve-Month Cutoff
Once the original appraisal passes twelve months old at the note date, Form 1004D is no longer enough. The lender must obtain a brand-new appraisal regardless of market conditions. Single-close construction-to-permanent loans are the only exception.3Fannie Mae. B4-1.2-04 – Appraisal Age and Use Requirements
When Part B Is Required
Part B comes into play when the original appraisal was issued “subject to” something: unfinished repairs, incomplete renovations, or ongoing new construction. Before funding, the lender needs confirmation the work was finished. The appraiser visits the property, compares its current state against the conditions listed in the original appraisal, and verifies the work was completed satisfactorily.2Fannie Mae. B4-1.2-05 – Requirements for Verifying Completion and Postponed Improvements
The appraiser can rely on an on-site visual inspection or alternative methods like virtual inspections, digital photos, or site videos. Whichever method is used, the documentation must include visually verifiable exhibits that are unaltered and can be authenticated using metadata and the property’s geocode. If digital exhibits are linked rather than embedded, the links must stay accessible for the life of the loan.2Fannie Mae. B4-1.2-05 – Requirements for Verifying Completion and Postponed Improvements
If the required conditions are not met, closing stalls. The lender cannot clear the condition and move toward final funding until the appraiser certifies completion. That gives you a strong practical reason to stay on top of contractors as the closing date approaches.
When an Attestation Letter Can Replace Part B
Form 1004D is not always required for completion verification. In certain situations, an attestation letter can substitute for Part B entirely.2Fannie Mae. B4-1.2-05 – Requirements for Verifying Completion and Postponed Improvements
For new construction, both the borrower and builder can sign a letter confirming the home was built according to the plans and specifications, including any amendments. The letter must include the borrower’s name, the property address, certification language, both signatures with dates, and exterior and interior photos. If both parties will not sign, the lender falls back to a Form 1004D completed by an appraiser.
For repairs on an existing home, the borrower alone can sign a letter confirming satisfactory completion. That letter must include the borrower’s name, property address, certification language, signature and date, visual evidence of the finished work, and one of three things: a signature from a qualified professional, a professionally prepared report, or paid invoices.
For either letter, any linked digital exhibits must stay accessible for the life of the loan and must be authenticatable through metadata and the property’s geocode. The letter and supporting documentation live in the permanent loan file.2Fannie Mae. B4-1.2-05 – Requirements for Verifying Completion and Postponed Improvements
Closing With Work Still Unfinished
Sometimes a loan needs to close even though minor work is not finished. Fannie Mae allows this under specific conditions, and a Part B certification generally follows later once the work is done.
For new or proposed construction, the postponed items must be part of the original sales contract. The work must be postponed for a legitimate reason such as weather or material shortages, and the unfinished items cannot block an occupancy permit. The remaining improvements also cannot cost more than 10% of the “as completed” appraised value.2Fannie Mae. B4-1.2-05 – Requirements for Verifying Completion and Postponed Improvements
The lender establishes a completion escrow by withholding 120% of the estimated cost of finishing the work from the purchase proceeds. If the builder provides a guaranteed fixed-price contract, the escrow only needs to equal the full contract amount. All postponed work must be done within 180 days of the note date.2Fannie Mae. B4-1.2-05 – Requirements for Verifying Completion and Postponed Improvements
On existing homes under Fannie Mae’s HomeStyle Refresh program, the lender escrows the total cost of the improvements and may add a contingency reserve of up to 20%. The same 180-day deadline applies, and any leftover escrow funds go toward reducing the unpaid principal balance rather than back to the borrower.2Fannie Mae. B4-1.2-05 – Requirements for Verifying Completion and Postponed Improvements
Cost, Submission, and Timing
The form itself is short. The appraiser enters identifying information from the original report: the original appraiser’s name, the property address, the effective date of the original valuation, and the original appraised value.5Fannie Mae. Form 1004D – Appraisal Update and/or Completion Report They check the box for Part A, Part B, or both. The borrower’s name and loan case number need to match the file exactly so the lender can tie the update to your loan.
The completed form goes to the lender through a secure digital portal. Underwriting reviews it to confirm the findings still support the mortgage terms. If Part A shows no value decline, the loan proceeds. If Part B confirms the repairs are done, the lender clears the condition and moves the file toward funding. Expect the cost to fall somewhere between $125 and $200, though it varies by location and appraiser.
What Changes in 2026
Starting in 2026, the mortgage industry is moving to a redesigned appraisal reporting framework called the Uniform Appraisal Dataset (UAD) 3.6. The functions currently handled by Form 1004D split into two standalone reports: a Completion Report and a Restricted Appraisal Update Report.6Freddie Mac. Uniform Appraisal Dataset (UAD) 3.6 FAQ
Form 1004D does not vanish on day one. If the original appraisal was completed on a legacy form, Form 1004D (Freddie Mac Form 442) still applies. The new standalone reports only come into play when the original appraisal was completed on the redesigned URAR format.6Freddie Mac. Uniform Appraisal Dataset (UAD) 3.6 FAQ FHA has announced plans to adopt UAD 3.6 beginning in spring 2026 for early adopters, with a transition period allowing both formats. If you are closing in 2026, which document you see depends on when your original appraisal was ordered and which format the appraiser used.