To claim the domestic content bonus credit, a clean energy project must use American-made steel and iron for every stage of their production, hit a domestic cost percentage for manufactured products that rises each year, and file a Domestic Content Certification Statement with the first return that reports the bonus. The reward is meaningful: up to 10 additional percentage points on the Investment Tax Credit, or a 10 percent increase in the per-kilowatt-hour Production Tax Credit. For projects that begin construction in 2026, at least 50 percent of manufactured product costs must come from domestic sources.1Internal Revenue Service. Notice 2023-38 – Domestic Content Bonus Credit Guidance under Sections 45, 45Y, 48, and 48E
What the Bonus Is Worth and Which Credits It Attaches To
The bonus applies to qualified facilities under the Production Tax Credit (Section 45), energy projects under the Investment Tax Credit (Section 48), and the technology-neutral credits under Sections 45Y and 48E for facilities placed in service after December 31, 2024.1Internal Revenue Service. Notice 2023-38 – Domestic Content Bonus Credit Guidance under Sections 45, 45Y, 48, and 48E Solar arrays, land-based and offshore wind, battery storage, and other clean energy technologies all qualify. The facility must be placed in service after December 31, 2022.
How much you get depends on the credit:
- Investment Tax Credit (Section 48 or 48E): the energy percentage increases by 10 percentage points if the project also meets prevailing wage and apprenticeship requirements. Meeting domestic content but not the labor standards yields only a 2-percentage-point increase.2Office of the Law Revision Counsel. 26 USC 48 – Energy Credit
- Production Tax Credit (Section 45 or 45Y): the credit amount per kilowatt-hour increases by 10 percent.3Office of the Law Revision Counsel. 26 USC 45 – Electricity Produced From Certain Renewable Resources
Percentage points versus percent trips people up. A Section 48 project with a 30 percent base rate goes to 40 percent with the bonus. A Section 45 project gets 10 percent more of whatever credit amount it was already generating.
Prevailing Wage and Apprenticeship: The Gate to the Full ITC Bonus
For Investment Tax Credit projects, hitting domestic content targets is only half the equation. A project that also satisfies prevailing wage and apprenticeship standards gets the full 10-percentage-point increase; a project that misses on labor gets 2 points.4Internal Revenue Service. Domestic Content Bonus Credit On a utility-scale project, that gap runs into the millions.
Small projects get a carve-out. Facilities with a maximum net output of less than 1 megawatt qualify for the full 10-percentage-point increase without meeting the prevailing wage and apprenticeship rules.4Internal Revenue Service. Domestic Content Bonus Credit Small commercial rooftop and community-scale installations often sit under that threshold.
Steel and Iron: All Manufacturing Must Happen in the U.S.
Steel and iron face the strictest standard. Every manufacturing process, from initial melting through final coatings and treatments, must take place in the United States. The single exception is metallurgical processes involving the refinement of steel additives.1Internal Revenue Service. Notice 2023-38 – Domestic Content Bonus Credit Guidance under Sections 45, 45Y, 48, and 48E
Structural components like rebar, beams, and load-bearing columns must consist entirely of domestic steel or iron. If any production stage happens abroad, the component fails. There is no percentage threshold and no partial credit. Pass or fail.
Small items like nuts, bolts, and washers may be excluded from this strict standard when they are treated as subcomponents of a larger manufactured product rather than standalone steel or iron components. Classify each metal item carefully. Mischaracterizing a structural steel element as a subcomponent could sink the entire bonus claim.
Manufactured Products: The Cost-Percentage Test
Manufactured products such as inverters, solar modules, wind turbine nacelles, and battery modules follow a different rule. Instead of 100 percent domestic production, the test is cost-based: the share of total manufactured product costs from domestic sources must meet or exceed the threshold for the project’s construction start year.3Office of the Law Revision Counsel. 26 USC 45 – Electricity Produced From Certain Renewable Resources
Thresholds by construction start year:
- 2024 or earlier: 40 percent (20 percent for offshore wind)
- 2025: 45 percent (27.5 percent for offshore wind)
- 2026: 50 percent (35 percent for offshore wind)
- 2027: 55 percent (45 percent for offshore wind)
- 2028 and later: 55 percent (55 percent for offshore wind)
Offshore wind starts lower because the domestic supply chain for offshore turbine components is less developed. By 2028, the thresholds converge at 55 percent.1Internal Revenue Service. Notice 2023-38 – Domestic Content Bonus Credit Guidance under Sections 45, 45Y, 48, and 48E
How the Cost Calculation Works
The domestic cost percentage is the total cost of domestic components divided by the total cost of all components in the manufactured products used in the project. Costs include direct material costs (materials integrated into final goods) and direct labor costs (wages, payroll taxes, and supplemental benefit plan contributions). Subcomponent costs are excluded. You look only at the components going directly into the finished manufactured product, not the raw inputs used to make those components.
That requires detailed cost data from every manufacturer in the supply chain. For each inverter, tracker, module, or turbine assembly, you need to know which components were produced domestically and what they cost. Gathering the information during procurement, rather than after installation, is what keeps a certification effort on track.
The Safe Harbor Alternative
Because collecting granular cost data from every supplier is a heavy lift, the IRS offers an elective safe harbor that lets developers use pre-calculated cost percentages instead of actual manufacturer costs. The current version is the First Updated Elective Safe Harbor in Notice 2025-08, which replaced the tables from Notice 2024-41.5Internal Revenue Service. Notice 2025-08 – First Updated Elective Safe Harbor
The safe harbor assigns a fixed cost percentage to each component of common project types: solar PV ground-mount, rooftop solar, land-based wind, and battery storage. Elect the safe harbor and you simply add up the assigned percentages for each component sourced domestically. The total is your domestic cost percentage, and you do not need to collect actual invoices or cost breakdowns from manufacturers for those components.5Internal Revenue Service. Notice 2025-08 – First Updated Elective Safe Harbor
Two details worth noting. A component not listed in the safe harbor tables cannot count toward your domestic cost percentage, though it also will not disqualify you from using the safe harbor. And if you source the same type of component from both domestic and foreign suppliers, the notice includes a nameplate-capacity formula for calculating a blended cost percentage for that mixed-source item.
The election is made on the Domestic Content Certification Statement. Once elected for a project, you use the safe harbor tables exclusively. You cannot mix actual cost data with assigned percentages.
Certification and Filing
To claim the bonus, attach a Domestic Content Certification Statement to the applicable IRS form filed with the annual return for the first tax year in which you report a domestic content bonus credit amount.4Internal Revenue Service. Domestic Content Bonus Credit The relevant forms are Form 8835 for the Renewable Electricity Production Credit6Internal Revenue Service. About Form 8835, Renewable Electricity Production Credit and Form 3468 for the Investment Credit.7Internal Revenue Service. About Form 3468, Investment Credit
The statement must include the project’s geographical location, the date the facility was placed in service, and a detailed breakdown of the domestic cost percentage achieved for manufactured products. For steel and iron, you need written certifications from each manufacturer confirming that all manufacturing processes occurred in the United States.1Internal Revenue Service. Notice 2023-38 – Domestic Content Bonus Credit Guidance under Sections 45, 45Y, 48, and 48E If you are electing the safe harbor, the statement must include an affirmative declaration that you are relying on the safe harbor tables.8Internal Revenue Service. Notice 2024-41 – Domestic Content Safe Harbor
Keep organized manufacturer records from procurement forward. That is your audit trail.
Tax-Exempt Entities and Elective Pay
State and local governments, tribal governments, and nonprofits can receive clean energy credits as direct payments under Section 6417 instead of reducing tax liability. For these entities, missing the domestic content requirement triggers a phaseout that reduces the payment they receive.3Office of the Law Revision Counsel. 26 USC 45 – Electricity Produced From Certain Renewable Resources
Two categories are exempt from the phaseout: facilities that satisfy the domestic content requirement, and facilities with a maximum net output of less than 1 megawatt.4Internal Revenue Service. Domestic Content Bonus Credit For everyone else, the credit declines, which makes domestic content compliance especially important for tax-exempt sponsors who rely on elective pay.
Two exceptions can preserve the full payment even without meeting domestic content standards. The first applies when domestic sourcing would increase overall construction costs by more than 25 percent. The second applies when the relevant steel, iron, or manufactured products are not produced domestically in sufficient quantities or adequate quality.4Internal Revenue Service. Domestic Content Bonus Credit Under Notice 2024-84, the IRS extended a simplified transition process for claiming these exceptions: for projects that begin construction before January 1, 2027 (or the issuance of further guidance, whichever is later), an attestation with proper recordkeeping is enough to establish the exception.
If You Plan to Transfer the Credit
Under Section 6418, eligible taxpayers can transfer clean energy credits to unrelated buyers for cash. The domestic content bonus is included in the transferable amount, but it cannot be separated and sold on its own. The credit transfers as a single package; there is no mechanism to sell just the bonus portion while keeping the base credit.9Internal Revenue Service. Elective Pay and Transferability Frequently Asked Questions – Transferability