Yes — a commercial general liability policy does cover property damage, but only when your business damages property that belongs to someone else, and only when the damage results from an accident rather than something you did on purpose. The policy also carries a long list of exclusions that pull back coverage for several situations business owners commonly assume are included. Knowing where the coverage stops is as important as knowing where it starts.
What CGL Counts as Property Damage
The standard CGL form, written by the Insurance Services Office (ISO), defines property damage in two parts. The first is physical injury to tangible property, plus any resulting loss of use of that property.1Insurance Services Office, Inc. Commercial General Liability Coverage Form CG 00 01 01 96 – Section: Definitions If your delivery driver backs into a client’s loading dock, the structural repairs and the revenue the client loses while repairs are underway both fall under this prong.
The second part covers loss of use of tangible property that has not been physically damaged at all.1Insurance Services Office, Inc. Commercial General Liability Coverage Form CG 00 01 01 96 – Section: Definitions A contractor who parks equipment so it blocks a neighboring store’s entrance has not harmed the building, but the store can’t operate. That lost revenue is still property damage under the policy. This second category catches claims that many business owners wouldn’t think of as property damage, and it’s where some of the more expensive surprise claims come from.
Both prongs share one requirement: the property must belong to a third party. Your CGL policy never pays for damage to your own buildings, equipment, or inventory. That is what commercial property insurance is for.
The Occurrence Trigger
CGL coverage only responds when the damage results from an “occurrence,” which the ISO form defines as an accident, including continuous or repeated exposure to the same harmful conditions.1Insurance Services Office, Inc. Commercial General Liability Coverage Form CG 00 01 01 96 – Section: Definitions A pipe that slowly leaks into a neighbor’s wall over several months qualifies, just as a sudden explosion does. Intentional damage does not. If you deliberately destroy someone’s property, the policy excludes the loss because it was expected or intended.
Where CGL Coverage Stops
The exclusions section is where most coverage disputes originate. The standard form contains over a dozen property damage exclusions. These are the ones most likely to affect whether a given claim gets paid.
Property in Your Care, Custody, or Control
Exclusion (j) removes coverage for several categories of property closely connected to the insured. The one that catches businesses most often is personal property in the care, custody, or control of the insured. If a dry cleaner ruins a customer’s suit or an electronics repair shop drops a laptop, the CGL policy will not pay because the item was entrusted to the business. The same exclusion applies to property you own, rent, or occupy, as well as property loaned to you.2Insurance Services Office, Inc. Commercial General Liability Coverage Form CG 00 01 01 96 – Section: Exclusions Businesses that regularly handle customer property need separate inland marine or bailee’s coverage to fill this gap.
Damage to Your Own Work and Your Own Product
The policy excludes damage to the insured’s own completed work and the insured’s own products. If a roofing contractor installs shingles that fail, the cost to tear off and redo the roof is not covered. CGL insurance is not a warranty or a guarantee of workmanship. It covers the consequences of your mistakes on other people’s property, not the cost of fixing your own output.
Where this gets interesting is the subcontractor exception. If the defective work was performed by a subcontractor on your behalf, the exclusion for damage to “your work” does not apply. In the roofing example, if you hired a subcontractor to install the shingles and the installation failed, your CGL policy would cover the resulting damage. This matters enormously for general contractors who rely on subs for most of their fieldwork. The policy still will not pay to redo the subcontractor’s faulty work itself, only to repair other property harmed by it.
Pollution
The standard CGL form excludes property damage arising from the discharge, dispersal, or release of pollutants. By the mid-1980s, the insurance industry adopted what’s commonly called the “absolute pollution exclusion,” which removes coverage regardless of whether the release was sudden or gradual. Many courts have interpreted this exclusion narrowly, limiting it to traditional industrial pollution rather than applying it to every chemical exposure incident. The safe assumption for any business handling hazardous materials is that CGL coverage will not respond to pollution claims without a separate pollution liability endorsement.
Vehicles and Mobile Equipment
The CGL form excludes property damage arising from the ownership or operation of autos, aircraft, and watercraft. If your employee causes a fender bender in a company truck, the claim goes to your business auto policy. The dividing line between “auto” and “mobile equipment” matters. Vehicles designed primarily for off-road use, such as bulldozers, forklifts, farm machinery, and vehicles that move on crawler treads, are classified as mobile equipment, and the CGL does cover property damage they cause. The key question is whether the vehicle is designed for travel on public roads.
Even for vehicles classified as autos, there is a useful carve-back: if the property damage results from operating permanently attached equipment rather than from driving the vehicle, the CGL covers it. A bucket truck that drops a tree limb on a fence during trimming is covered because the damage came from operating the equipment, not from driving.
Electronic Data
Electronic data is not tangible property under the CGL form’s definition of property damage.1Insurance Services Office, Inc. Commercial General Liability Coverage Form CG 00 01 01 96 – Section: Definitions Since coverage only applies to physical injury to tangible property or loss of use of tangible property, corrupted files, deleted databases, and software failures fall outside the policy. Later editions of the CGL form added an explicit electronic data exclusion to reinforce this point. If your work could damage a client’s data, you need a cyber liability or technology errors and omissions policy.
The Fire Damage Exception for Rented Premises
The CGL policy carves out a useful exception for fire damage to premises you rent. Even though damage to property you rent or occupy is normally excluded, the policy provides a sublimit, typically starting at $100,000, specifically for fire damage to your rented space. The policy also covers damage from any cause, not just fire, to premises you occupy for seven days or fewer, which protects businesses renting short-term event or pop-up spaces.p>
This built-in coverage is limited. It will not pay for flood, earthquake, or other non-fire perils at a long-term rented location, and the sublimit is often far below the value of a commercial space. Landlords routinely require tenants to carry higher limits. If your lease requires more protection than the standard sublimit provides, you can usually increase it through an endorsement for a modest additional premium.
How Much the Policy Will Pay
Every CGL policy sets dollar caps on what the insurer will pay. Three limits matter most:
- Each-occurrence limit: the maximum the insurer pays for any single accident or event. A common starting point is $1 million per occurrence.
- General aggregate limit: the total the insurer will pay for all covered claims during the policy period, typically one year. A standard general aggregate is $2 million, meaning two $1 million claims in the same year would exhaust the policy.
- Products-completed operations aggregate: a separate aggregate that applies only to claims arising from your products or finished work. This limit exists so that a product liability claim does not eat into the general aggregate that protects against premises and operations claims.
If your per-occurrence limit is $1 million and your general aggregate is $2 million, a single incident can trigger up to $1 million in payments, but once all claims for the year total $2 million, the policy stops paying. Businesses in high-risk industries or those with large contracts often purchase an umbrella or excess liability policy to extend these limits.
Defense Costs Come With Coverage
One of the most valuable features of a CGL policy is the insurer’s duty to defend you against any lawsuit alleging covered property damage. The insurance company pays for attorneys, expert witnesses, court filings, and related litigation expenses on your behalf. Even if the claim turns out to be baseless, the insurer still handles the defense, which can easily cost tens of thousands of dollars on its own.
In the standard ISO form, these defense costs are treated as supplementary payments, meaning they sit outside your policy limits. The money spent defending a lawsuit does not reduce the amount available to pay for the actual property damage. Some non-standard or manuscript policies move defense costs inside the limits, which erodes the money available for settlements. If you’re shopping for coverage, confirming that defense costs are outside the limits is one of the first things worth checking on the declarations page.
Filing a Property Damage Claim
Speed and documentation quality are the two factors that most influence how smoothly a claim moves. Gather these items before you contact your insurer:
- Policy details: your policy number and effective dates from the declarations page.
- Incident specifics: the exact date, time, and location of the damage.
- Description of damage: what was damaged, how it happened, and the scope of the loss.
- Photographs: multiple angles, close-ups of damage, and wide shots showing context.
- Contact information: names and contact details of the injured party, witnesses, and anyone else involved.
Most insurers accept claims through an online portal, a dedicated claims hotline, or through your insurance agent. Once the report is logged, the insurer assigns a claims adjuster who reviews your evidence, may visit the site, and interviews relevant parties. The adjuster then compares the facts against your policy language to determine whether coverage applies. Straightforward claims can resolve in a few weeks. Complex situations involving disputed liability or extensive damage often take 30 to 60 days or longer.
If You Receive a Reservation of Rights Letter
During the investigation, you may receive a reservation of rights letter. This letter means the company is investigating the claim and handling it for now, but it has not made a final coverage decision. The insurer is reserving the right to deny coverage later if the investigation reveals an applicable exclusion. Receiving one does not mean your claim will be denied. It means the insurer sees a potential coverage question. Read the letter carefully, because it will identify which policy provisions are at issue, giving you a chance to gather additional evidence that supports coverage.
If the Claim Is Paid, and If It Isn’t
If the insurer determines coverage applies, it negotiates a settlement with the third party and issues payment directly to the claimant or the repair provider. Your responsibility is limited to paying any applicable deductible, which typically ranges from $500 to $2,500 for small to midsize businesses, though self-insured retentions on larger policies can run much higher. With a standard deductible, the insurer pays the full claim and then seeks reimbursement from you. With a self-insured retention, you handle the claim yourself until the retention is exhausted, and then the insurer steps in.
If the insurer denies the claim, start by requesting a written explanation citing the specific policy language that supports the denial. You can file a complaint with your state’s department of insurance if you believe the denial was improper. For disputes over the value of a loss rather than whether coverage exists, many policies include an appraisal clause that brings in independent appraisers. A coverage attorney can evaluate whether the denial holds up under your state’s law, and breach of contract or bad faith claims against the insurer are available if the denial is unjustified.
What CGL Costs
Small businesses with fewer than 50 employees typically pay somewhere between $300 and $28,000 per year for CGL coverage, with a median near $1,500 annually for standard $1 million per-occurrence and $2 million aggregate limits. That range reflects the reality that a home-based consulting firm and a demolition contractor face very different risk profiles. Industry classification, revenue, number of employees, claims history, and the physical location of your operations all factor into the premium. Businesses in construction, manufacturing, and food service consistently pay more than office-based operations.
The cheapest policy is not always the smartest purchase. Pay attention to whether defense costs sit inside or outside the limits, how the policy handles additional insured endorsements, and whether the deductible structure matches your cash flow. A policy that saves $200 a year but shifts defense costs inside the limits can leave you underinsured when it matters most.