Yes, business insurance generally covers equipment, but the real answer depends on which policy you hold, where the equipment was when it was damaged, and what caused the loss. A standard commercial property policy covers business equipment kept at your listed address. Equipment that travels, equipment that breaks down internally, and equipment stolen by employees usually need separate coverage you may not have.
What Standard Commercial Property Coverage Includes
The core of equipment coverage for most companies sits inside a commercial property policy, often bundled with general liability into a Business Owners Policy (BOP). Insurers call the covered category “business personal property,” and it includes the tangible items you use to operate: computers, furniture, machinery, tools, inventory, point-of-sale systems, and specialized equipment.
Coverage applies to property at the address shown on your declarations page, and under standard policy language, it extends to items within 100 feet of that described premises, including property in the open or in a vehicle within that range. Step outside that boundary and the standard form stops responding.
One point worth being clear on: property coverage and liability coverage do different jobs. Property insurance pays to repair or replace your own damaged equipment. Liability insurance pays for injuries or damage you cause to someone else. A liability policy will never reimburse you for your own broken machinery, no matter how expensive.
Owned vs. Leased Equipment
Equipment you own is covered up to your policy limits. Leased equipment is more complicated. Most lease agreements require the lessee to carry insurance and often specify that the lessor must be named as a loss payee. If leased machinery is destroyed, the insurance payout typically goes first to the lessor to satisfy the lease. Carrying less insurance than your lease requires can put you in breach of contract, leaving you on the hook for the full replacement cost with no insurance behind you.
Remote and Employee-Held Equipment
Standard ISO policy forms cover business personal property only while it’s at the described premises or within 100 feet of it. Company laptops employees take home, tablets used on client sites, and tools kept in personal vehicles sit outside that boundary. Some policies include limited off-premises extensions, but the sublimits are usually too low to cover expensive gear. A distributed workforce or regular off-site work typically calls for an endorsement that broadens off-premises coverage, or a separate inland marine policy.
How Much You Actually Get Paid
Whether a claim leaves you whole depends on two policy mechanics that many owners don’t examine until it’s too late.
Actual Cash Value vs. Replacement Cost
Replacement cost coverage pays what a new equivalent item costs today, with no deduction for age. If your five-year-old server is destroyed and a comparable new one costs $8,000, you receive $8,000 minus your deductible. Actual cash value coverage subtracts depreciation first. That same server might be valued at $2,500 after five years, leaving you to cover the $5,500 gap yourself.1National Association of Insurance Commissioners. What’s the Difference Between Actual Cash Value Coverage and Replacement Cost Coverage
Replacement cost policies cost more up front. For equipment that depreciates quickly, such as computers and electronics, actual cash value coverage creates a gap that grows every year you own the asset.
The Coinsurance Clause
Commercial property policies typically require you to insure your property to at least 80% or 90% of its total replacement value. Fall short of that threshold at the time of a loss and the insurer reduces your claim proportionally, even when the loss itself sits well below your policy limit.
The arithmetic is punishing. Say your equipment has a replacement value of $1,000,000, your policy carries an 80% coinsurance clause, and you’re insured for only $500,000. You should have carried $800,000. On a $100,000 fire loss, the insurer divides $500,000 by $800,000 (0.625) and multiplies by $100,000, paying $62,500 before your deductible. The rest comes from you.
Property values don’t update themselves inside a policy, and equipment inventories don’t either. An annual review with your agent is the only reliable fix.
What Causes of Loss Are Covered
Commercial property policies come in two flavors. A named perils policy lists each event that triggers coverage, typically fire, lightning, windstorm, hail, explosion, theft, and vandalism. If what happened isn’t on the list, the insurer doesn’t pay. An open perils policy covers everything that isn’t specifically excluded. Open perils costs more and shifts the burden of proof: under named perils, you have to prove a listed cause; under open perils, the insurer has to prove an exclusion.
Both forms exclude certain events outright. Floods, earthquakes, and acts of war almost always require separate specialized policies. A business in a flood zone that assumes its property policy handles water damage from flooding will not like what the adjuster says.
Common Exclusions That Catch Owners Off Guard
Employee Theft
Standard commercial property policies exclude losses caused by employee dishonesty. If a worker steals equipment, tools, or inventory, your property policy won’t respond. The fix is a separate commercial crime policy, sometimes called fidelity coverage, which covers theft by employees whether or not the individual is identified. Businesses with high-value portable equipment or significant inventory should treat this coverage as a baseline rather than an upgrade.
Cyber-Caused Physical Damage
Physical equipment damage caused by a cyberattack falls into a gap. If a hacker compromises your network and causes a motor to overheat or a system to short-circuit, many equipment breakdown policies now carry cyber incident exclusions that remove coverage whenever a cyber event sits anywhere in the chain of causation. Standard cyber liability policies focus on data breaches and system restoration, not physical hardware replacement. Ask your carrier directly whether your equipment breakdown and cyber policies, read together, actually cover a cyber-triggered equipment failure.
Coverage for Equipment That Moves
Equipment that regularly leaves your premises needs inland marine insurance. The name is a leftover from maritime insurance law, but today the coverage handles land-based property in transit, at job sites, at trade shows, or stored at third-party locations.
Inland marine policies use a floater, which follows the equipment wherever it goes rather than tying coverage to a fixed address. It’s the right fit for contractors with tools on job sites, photographers carrying camera gear, IT consultants transporting servers, or any business that moves expensive equipment around.
Scheduled vs. Blanket Coverage
Scheduled coverage lists each item with a specific insured value. Claims are straightforward, but you have to update the schedule every time you buy or sell something. Blanket (unscheduled) coverage protects broad categories of property up to a total limit without listing individual items. Blanket is more flexible for changing inventories, but it can produce disputes about whether a particular item belongs in the covered category.
For a single high-value item, like a $50,000 piece of survey equipment, scheduling it is almost always the better choice. For a mix of interchangeable tools worth a few hundred dollars each, blanket coverage saves paperwork.
Coverage When Equipment Breaks Itself
Standard property insurance covers damage from outside forces: fires, storms, theft. It generally does not cover damage from internal mechanical or electrical failure. That’s the job of equipment breakdown coverage.
Equipment breakdown protection responds to sudden and accidental internal failures: electrical arcing, power surges, motor burnout, boiler and pressure vessel explosions, and mechanical breakdown of moving parts. A failed HVAC compressor, a short-circuited industrial oven, a power surge that destroys a server rack: this is the coverage that pays.
These policies exclude normal wear and tear and predictable maintenance failures. Insurance covers sudden, unexpected events, not gradual deterioration you should have caught through maintenance. Most equipment breakdown policies also cover temporary repairs and expediting charges for faster replacement parts.
Spoilage
Businesses that depend on refrigeration or climate control should look closely at the spoilage provisions inside their equipment breakdown coverage. The standard ISO Equipment Breakdown Protection Coverage Form includes a spoilage damage provision covering loss of perishable goods caused by a lack or excess of power, refrigeration, or steam, but only if the declarations page activates it. Restaurants, florists, pharmaceutical distributors, and food manufacturers are obvious cases, but any business storing temperature-sensitive inventory should confirm the coverage is actually turned on.
Lost Income While Equipment Is Down
Replacing damaged equipment solves only half the problem. The weeks or months you spend operating at reduced capacity represent revenue a property policy won’t recover on its own.
Business income coverage, sometimes called business interruption insurance, pays the net income you would have earned plus continuing fixed expenses like rent and payroll during the restoration period following a covered property loss. Many BOPs include a basic form of this coverage, but limits and terms vary. Coverage usually runs from the date of loss until the property is repaired or replaced, or the coverage period expires, whichever comes first.
If a single critical piece of equipment going down can halt your revenue, your business income limits deserve the same attention as your property limits.
Filing an Equipment Damage Claim
The first 48 hours after a loss shape how the claim resolves. Insurers expect prompt notice and thorough documentation.
Notify your carrier or agent as soon as possible with your best estimate of the damage. Document everything before you clean up or dispose of items: photographs, video, serial numbers, and visible evidence of what caused the failure. Pull purchase receipts, invoices, maintenance records, and lease agreements for affected equipment. If you can’t find original receipts, bank statements and accounting records showing the purchase can substitute.
Get repair estimates from qualified vendors, but don’t authorize major repairs before the adjuster has inspected, unless the work is necessary to prevent further damage. Most policies require you to take reasonable steps to protect undamaged property, so securing the premises and shutting down compromised systems is both expected and typically covered as an extra expense. Keep a running log of every conversation with your adjuster, with dates and what was discussed. Claims that stall almost always trace back to a documentation gap.