Do You Need a 1099 for a Canadian Contractor?

You do not issue a 1099 for a Canadian contractor. The 1099 series is for U.S. persons only, and a contractor who lives and works in Canada is a foreign person under IRS rules. Instead, you collect a W-8 form (or Form 8233) before you pay, apply the U.S.-Canada tax treaty to determine whether to withhold at 30% or at zero, and report the payment on Form 1042-S with a Form 1042 summary the following March.

Getting this workflow wrong can leave you personally liable for the full 30% withholding you should have collected, plus penalties and interest. The good news is that the paperwork is straightforward if you handle it before the first invoice gets paid.

Why a Canadian Contractor Isn’t a 1099 Situation

The 1099-NEC and 1099-MISC are reserved for payments to U.S. citizens, resident aliens, and domestic entities. A Canadian resident sits on the foreign-person side of the line, and the IRS has a separate reporting track for those payments built around Form 1042-S rather than any 1099.1Internal Revenue Service. Federal Income Tax Withholding and Reporting on Other Kinds of U.S. Source Income Paid to Nonresident Aliens

Before you even get to reporting, figure out where the work is being performed. Income sourcing depends on the contractor’s physical location while doing the work, not where your company is based. A developer writing code from Toronto earns foreign-sourced income. That same developer writing code while visiting your office in Chicago earns U.S.-sourced income. Only U.S.-sourced income triggers withholding and mandatory 1042-S reporting. Foreign-sourced income paid to a foreign person generally falls outside the U.S. tax system entirely.

This catches people off guard. If your Canadian contractor spends two weeks working from your U.S. office and the rest of the year working from Canada, you may need to split the payment and treat the U.S. portion differently. You, as the payer, are responsible for sourcing correctly.

The Form You Collect Before You Pay

Before you send any money, collect the right tax form from your Canadian contractor. Domestic contractors give you a W-9. Foreign contractors give you a W-8, and the version depends on whether you’re paying an individual or an entity.

  • Individuals and sole proprietors give you Form W-8BEN.
  • Corporations, partnerships, and other entities give you Form W-8BEN-E.

Both forms certify that the contractor is a foreign person and the beneficial owner of the income, and both give the contractor a place to claim reduced withholding under the U.S.-Canada Income Tax Treaty.

Individual Canadians providing personal services have another option: Form 8233, designed specifically to claim a treaty exemption from withholding on compensation for independent personal services.2Internal Revenue Service. About Form 8233, Exemption From Withholding on Compensation for Independent (and Certain Dependent) Personal Services of a Nonresident Alien Individual A W-8BEN covers a broader range of income types, but Form 8233 is the more precise fit when the payment is strictly for services rather than royalties, dividends, or other passive income.

To claim treaty benefits, the contractor must provide their Canadian tax identification number on the form. For individuals, this is typically a Social Insurance Number. For entities, it’s a Business Number. The form also has to cite the specific treaty article that exempts or reduces U.S. tax on the payment.3Internal Revenue Service. Claiming Tax Treaty Benefits For most independent contractor payments, that’s Article VII, covering business profits.

A properly completed W-8BEN is valid from the date signed through the last day of the third succeeding calendar year. A form signed any time during 2026 remains valid through December 31, 2029.4Internal Revenue Service. Instructions for Form W-8BEN If the contractor’s circumstances change before that date — a move to the U.S., a change in entity structure, anything that makes the form inaccurate — get a new one immediately.

Without a valid W-8 on file, the IRS treats the contractor as an undocumented payee. That forces you to withhold at the full 30% statutory rate on any U.S.-sourced income, with no treaty reduction available.1Internal Revenue Service. Federal Income Tax Withholding and Reporting on Other Kinds of U.S. Source Income Paid to Nonresident Aliens This is the single most common compliance failure for U.S. businesses paying Canadians, and it is entirely avoidable.

The 30% Default Withholding Rule

Under 26 U.S.C. § 1441, any person paying U.S.-sourced compensation to a nonresident alien must withhold 30% of the gross payment and remit it to the IRS.5Office of the Law Revision Counsel. 26 USC 1441 – Withholding of Tax on Nonresident Aliens The 30% applies to the full gross amount, not the amount after the contractor’s expenses. Pay a Canadian consultant $10,000 for U.S.-sourced work with no treaty exemption, and you withhold $3,000 and send the contractor $7,000.

This is not optional. Under Section 1461, the withholding agent — you, the payer — is personally liable for any tax you should have withheld but didn’t.6Office of the Law Revision Counsel. 26 U.S. Code 1461 – Liability for Withheld Tax Even if the contractor later pays the tax themselves, your liability for penalties and interest survives.7Internal Revenue Service. Tax Withholding Types The IRS can come after both parties, and in practice they tend to come after the U.S. payer first because you’re easier to find.

Using the Treaty to Reduce Withholding to Zero

The 30% default rarely ends up being the actual rate for Canadian contractors, because the U.S.-Canada Income Tax Treaty offers a straightforward path to zero withholding for most independent contractor payments. The key provision is Article VII, which covers business profits.

Under Article VII, a Canadian resident’s business profits are only taxable in the U.S. if the contractor operates through a “permanent establishment” located in the U.S. If there’s no permanent establishment, there’s no U.S. tax, which means no withholding is required.

The treaty defines a permanent establishment as a fixed place of business where the contractor regularly conducts operations, including offices, branches, factories, and workshops.8Internal Revenue Service. United States – Canada Income Tax Convention A Canadian freelancer who works from home in Vancouver and never sets foot in a U.S. office has no permanent establishment here, and their income is exempt from U.S. tax under the treaty. Regularly working from a U.S. coworking space or client office can qualify as a permanent establishment if the arrangement is fixed and ongoing, and a Canadian construction company running a U.S. job site for more than 12 months also triggers permanent establishment status.

When the contractor has no permanent establishment and submits a valid W-8 or Form 8233 citing Article VII, you can reduce withholding to zero. You must have a reasonable basis to believe the treaty claim is valid; you can’t reduce withholding if something on the form looks wrong or contradicts what you know about the contractor’s situation.

Reporting the Payment on Form 1042-S

Even when the treaty eliminates withholding entirely, you still have reporting obligations. Payments of U.S.-sourced income to a Canadian contractor go on Form 1042-S (Foreign Person’s U.S. Source Income Subject to Withholding). It’s the foreign-person counterpart to the 1099-NEC.9Internal Revenue Service. Instructions for Form 1042-S

Form 1042-S reports the gross income paid, the applicable withholding rate, the amount actually withheld, and the codes that explain the treatment. For a typical Canadian independent contractor whose income is exempt under the treaty, you’d use Income Code 17 (compensation for independent personal services) and Chapter 3 Exemption Code 04 (exempt under tax treaty).10Internal Revenue Service. 2026 Instructions for Form 1042-S The contractor needs these codes to file accurately with the Canada Revenue Agency and, where relevant, claim a foreign tax credit.

Alongside the individual 1042-S forms, file Form 1042 (Annual Withholding Tax Return for U.S. Source Income of Foreign Persons). This is the summary return that reconciles the total income reported across all your 1042-S forms with the total tax you deposited during the year.

Both Form 1042 and all Forms 1042-S are due by March 15 of the year following the payment. For payments made during 2026, the deadline is March 15, 2027. If that date falls on a weekend or holiday, the deadline shifts to the next business day.9Internal Revenue Service. Instructions for Form 1042-S Furnish a copy of Form 1042-S to the contractor by the same March 15 deadline so they can handle their own filings.

If you file 10 or more information returns of any type during the year, you must e-file your Forms 1042-S. Financial institutions must e-file regardless of volume.10Internal Revenue Service. 2026 Instructions for Form 1042-S Most businesses paying Canadian contractors will hit the 10-return threshold once you count W-2s and 1099s, so plan on electronic filing.

Depositing Any Tax You Withhold

When you do withhold — because the treaty doesn’t apply or documentation is missing — deposit the funds with the IRS on a schedule that depends on how much you’ve accumulated across all foreign payees:

  • If you’ve accumulated more than $2,000 within a quarter-monthly period, deposit within 3 business days after the end of that period (essentially weekly).
  • If you’ve accumulated between $200 and $2,000, deposit monthly by the 15th of the following month.
  • If you’ve withheld between $1 and $200 for the year, deposit annually by March 15 along with your Form 1042.

All deposits go through the Electronic Federal Tax Payment System (EFTPS); a mailed check won’t do. Late deposits trigger penalties that escalate quickly: 2% at 1 to 5 days late, 5% at 6 to 15 days, 10% at 16 or more days, and 15% if you still haven’t deposited within 10 days of an IRS demand notice.11Internal Revenue Service. Publication 515 (2026), Withholding of Tax on Nonresident Aliens and Foreign Entities

Penalties for Skipping the Paperwork

The IRS imposes separate penalties for three different failures: failing to file correct Forms 1042-S, failing to furnish copies to the contractor, and failing to withhold. They stack.

Filing penalties for 2026 scale based on how late you fix the problem:9Internal Revenue Service. Instructions for Form 1042-S

  • Filed within 30 days of the deadline: $60 per form, up to $698,500 per year ($244,500 for small businesses).
  • Filed after 30 days but by August 1: $130 per form, up to $2,095,500 ($698,500 for small businesses).
  • Filed after August 1 or not filed at all: $340 per form, up to $4,191,500 ($1,397,000 for small businesses).
  • Intentional disregard: $690 per form or 10% of the total reportable amount, whichever is greater, with no cap.

The same tiers apply to failing to furnish a correct Form 1042-S to the recipient.

The failure-to-withhold exposure is separate and often larger. If you should have withheld 30% and didn’t, the IRS can hold you liable for the full amount of uncollected tax, plus penalties and interest. The contractor’s later payment of the tax doesn’t erase your penalty and interest exposure.7Internal Revenue Service. Tax Withholding Types A $50,000 undocumented payment means $15,000 in withholding liability that lands squarely on you.

Two Boundary Issues Worth Knowing

Social Security and Medicare. The U.S.-Canada Social Security Totalization Agreement covers a self-employed Canadian living in Canada under the Canada Pension Plan (or Quebec Pension Plan) and exempts them from U.S. Social Security and Medicare taxes. To document the exemption, the contractor can obtain a Certificate of Coverage: Form CPT56 from Canada.ca for CPP, or Form QUE/USA 101 from Retraite Québec for QPP.12Social Security Administration. Totalization Agreement with Canada You wouldn’t withhold self-employment taxes from an independent contractor’s pay in any case, but the certificate protects both sides if an audit raises the question.

State taxes. Federal treaty exemptions generally do not carry over to state income taxes. Most states don’t recognize federal tax treaties for state purposes, so a Canadian contractor performing any work while physically in a state that imposes income tax may face a separate state withholding obligation even when federal withholding is zero. Rules and thresholds vary. Check the specific state’s requirements independently; state penalties can be just as aggressive as federal ones.

The Practical Workflow

Handling a Canadian contractor cleanly comes down to a short checklist:

  • Collect a W-8BEN, W-8BEN-E, or Form 8233 before the first payment, with the contractor’s Canadian TIN and the treaty article being claimed.
  • Determine where the work is performed. Work done entirely from Canada is foreign-sourced and generally outside U.S. tax reach. Work done in the U.S. is U.S.-sourced and requires withholding analysis and 1042-S reporting.
  • Apply the treaty. If the contractor has no U.S. permanent establishment and has submitted valid documentation citing Article VII, withhold at zero.
  • If you do withhold, deposit through EFTPS on the required schedule.
  • File Form 1042-S and Form 1042 by March 15 of the following year, and give the contractor their copy of the 1042-S by the same date.
  • Check state obligations separately whenever any work was performed on U.S. soil.

The biggest mistake businesses make is treating a Canadian contractor like a domestic one: sending a W-9, planning to issue a 1099, and skipping the withholding analysis. By the time the error surfaces, they’re looking at potential liability for 30% of every payment they made, plus penalties. Collecting the right form upfront takes fifteen minutes. Cleaning up afterward costs considerably more.