Discrepancies in letters of credit are mismatches between the documents a seller presents and the terms the credit requires, and because banks pay against paper rather than goods, even small errors give the bank grounds to refuse payment. Industry estimates suggest that 60 to 70 percent of first-time document presentations contain at least one discrepancy, which makes this the single most common reason trade payments stall. The good news is that most discrepancies are resolvable if you know what the bank is looking at, how long it has to decide, and which fix fits your situation.
What Counts as a Discrepancy
Banks examining a presentation under UCP 600 apply what’s known as strict compliance. They look only at whether the documents, on their face, match the credit’s terms. They won’t call the shipping line to verify a delivery, inspect the cargo, or weigh the commercial reality of the trade. If the papers match the credit, the bank pays. If they don’t, the bank refuses, even when the underlying shipment went perfectly and the buyer is satisfied.1ICC Academy. Documentary Credits: Rules, Guidelines and Terminology
That rigidity cuts both ways. A seller with flawless documents gets paid even if the buyer complains about the goods, because the bank’s obligation is tied to the paper. A seller with a single clerical slip may be refused even when nothing is wrong with the shipment. Separating the financial transaction from the commercial deal is what makes letters of credit predictable enough to work across borders, and it’s why the details that look trivial from the business side are precisely the ones that stop payment.
The Most Common Discrepancies
Data That Conflicts Across Documents
The most frequent discrepancies involve inconsistent information spread across the presentation. If the commercial invoice shows a shipment weight of 5,000 kilograms and the bill of lading shows 5,050 kilograms, the bank will flag the conflict. The same applies when the invoice’s description of goods adds specifications or adjectives not found in the credit. Under UCP 600, data in any document must not conflict with data in another required document or with the credit itself.2ICC Digital Library. ICC Banking Commission Technical Advisory Briefing No. 1 The goods description on the invoice has to match the credit word for word; other documents can use a general description, as long as nothing in them contradicts the credit.
Late Shipment and Late Presentation
Letters of credit set two separate deadlines, and missing either one kills the presentation. The first is the latest shipment date. If the credit requires shipment by July 10 and the bill of lading shows a July 15 on-board date, the bank refuses the documents. The second is the presentation deadline: documents must reach the bank within 21 calendar days after shipment and no later than the credit’s expiry date, whichever comes first.1ICC Academy. Documentary Credits: Rules, Guidelines and Terminology A seller who ships on time but takes too long to gather paperwork can lose the payment just as easily as one who ships late.
Clerical Errors in Names, Addresses, and Marks
A misspelled company name, a transposed digit in an address, or a shipping mark that doesn’t match the credit can each trigger a refusal. Every detail on the insurance certificate, packing list, and certificate of origin needs to mirror what the credit specifies. Not every typo is fatal, though. The ICC’s International Standard Banking Practice clarifies that a misspelling which doesn’t change the meaning of a word or sentence is not a discrepancy. Writing “mashine” for “machine” won’t sink a presentation; writing “model 123” when the credit says “model 321” will.3ICC Academy. ISBP for Practitioners: Applying ICCs Banking Standards
Non-Documentary Conditions Are a Special Case
Sometimes a credit sets a condition without naming a document to prove it. A credit might state “Origin of goods: India” without requiring a certificate of origin or any origin reference in another required document. Under UCP 600, banks treat these non-documentary conditions as if they don’t exist and disregard them.4ICC Germany. ICC Banking Commission Technical Advisory Briefing No. 1: Non-documentary Conditions in Documentary Credits A bank cannot refuse a presentation because no document addresses the condition.
There’s a catch. If the seller voluntarily includes data in a required document that touches the non-documentary condition, that data must not conflict with the credit. If the seller mentions country of origin on the invoice and writes “China” when the credit says “India,” the bank will flag the conflict even though no origin document was required.2ICC Digital Library. ICC Banking Commission Technical Advisory Briefing No. 1 The safe approach is to leave out unrequired data or make sure any volunteered information matches the credit exactly.
How Long the Bank Has to Decide
Once a seller submits documents, the bank has a maximum of five banking days following the day of presentation to decide whether they comply.5Institute of International Trade. The Impact of the Banking Day in a Documentary Credit Subject to UCP 600 A banking day is any day the bank is regularly open at the location where the presentation was made, so weekends and local holidays don’t count. This window keeps banks from sitting on documents while commodity prices shift or buyers reconsider.
If the bank decides to refuse, it must send a single notice to the presenter listing every discrepancy it found. The notice has to go out by telecommunication or other fast means no later than the close of the fifth banking day.5Institute of International Trade. The Impact of the Banking Day in a Documentary Credit Subject to UCP 600 Requiring one comprehensive list prevents piecemeal rejections where a bank discovers a new problem each time the seller fixes the last one.
The consequence for missing this deadline is severe. A bank that fails to send its refusal notice within the five banking days is precluded from claiming the documents don’t comply. At that point, the bank must pay the seller, even if the documents contain obvious errors. This is one of the strongest protections the system gives sellers, and banks treat the deadline accordingly.
What a Rejection Actually Costs
A discrepancy notice doesn’t just delay payment. It can trigger a chain of real costs. The most immediate hit is demurrage and detention at the destination port. When documents are held up and the buyer can’t clear the goods, containers sit on the terminal or at the carrier’s depot, and shipping lines charge daily penalties that commonly run $150 to $300 per container. Those charges escalate the longer the delay runs.
Beyond port charges, the seller faces bank fees for each resubmission, courier costs for rushing corrected documents internationally, and the risk that the credit will expire before new documents can be presented. If the credit expires, the seller is left holding goods at a foreign port with no payment guarantee. Sometimes the goods end up sold at a discount to a local buyer, or shipped back at the seller’s expense. The total cost of a single discrepancy can far exceed the bank’s handling fee.
How to Resolve a Discrepancy
Ask the Buyer to Waive It
The most common resolution is the simplest. The bank contacts the buyer to ask whether they’ll waive the discrepancies. If the buyer agrees, the bank proceeds with payment despite the technical non-compliance. Buyers frequently grant waivers for minor clerical errors or when they want the goods released quickly. This path avoids the cost and delay of reissuing documents when the underlying trade is sound.
Correct and Resubmit the Documents
If the buyer won’t waive the errors, the seller can try to fix the documents and resubmit. This only works if the credit hasn’t expired and the 21-day presentation window hasn’t closed. A seller might obtain a corrected bill of lading from the carrier or issue a new commercial invoice to resolve a data conflict. Speed matters, because both deadlines keep running. In practice, this option is most viable for documents the seller controls directly, like invoices and packing lists. Getting a corrected transport document from a shipping line or a new certificate from an inspection agency takes longer and sometimes isn’t possible at all.
Amend the Credit
When the discrepancy comes from a credit term that no longer reflects reality, the buyer can ask the issuing bank to amend the credit so the documents match. If a shipment date slipped and the goods shipped a week late, an amendment extending the latest shipment date would eliminate the discrepancy. Amendments require the buyer’s initiative and both banks’ participation, so this isn’t a quick fix, but it may be the only option when the documents can’t be changed to match the original terms.
Send the Documents on Collection
As a last resort, the seller can instruct the bank to forward the documents on a collection basis rather than under the letter of credit. The bank drops its payment obligation and simply acts as an intermediary to collect funds from the buyer. The buyer receives the documents only after paying or accepting a draft. The seller loses the bank’s guarantee entirely and goes back to relying on the buyer’s willingness and ability to pay. This is a fallback, not a strategy, and it shifts all the credit risk back to the seller.
How to Prevent Discrepancies in the First Place
Given how often documents fail on first presentation, prevention is where most of the leverage sits. The ICC recommends several practices that experienced traders follow consistently.6ICC Academy. 25 Tips to Avoid Common Documentary Credit Issues
- Review the credit immediately on receipt. Check every condition against what you can actually deliver, and request amendments before shipping rather than hoping problems won’t surface at presentation.
- Copy the credit’s description of goods word for word onto the commercial invoice. Paraphrasing, abbreviating, or adding detail invites rejection.
- Use alphanumeric dates such as “15 Jul 2026” rather than “07/15/2026” to eliminate confusion between day/month and month/day conventions across countries.
- Track recurring errors. If the same discrepancy keeps appearing across transactions, fix the root cause in your document preparation process rather than relying on buyer waivers each time.
- Submit well before the deadline. Build buffer time for the bank’s five-day review and for any corrections. Last-minute presentations leave no room to fix problems.
- Prepare fresh documents rather than correcting old ones. Amendments, cross-outs, and corrections on documents create their own discrepancy risks.
- Train everyone involved. Sales teams negotiating credit terms and procurement teams arranging shipments both need to understand what the document requirements mean in practice. Discrepancies often originate in departments that never see the credit.
Timing the submission with the shipment also matters. If you ship goods and present documents on the same day, the buyer may not receive the documents until after the cargo arrives, which amplifies the pressure of any paperwork problem. Experienced exporters time their submissions so the bank’s review period doesn’t overlap with vessel transit in ways that strand cargo at the destination port.