Contractors Equipment Floater: Limits, Valuation, and Exclusions

A contractors equipment floater is an inland marine insurance policy that covers your construction tools and heavy machinery wherever they go, not just at a single business address listed on a standard property policy. Because excavators, generators, laser levels, and power tools move constantly between warehouses, trailers, highways, and job sites, a fixed-location policy leaves most of your fleet effectively uninsured the moment it rolls off the yard. A floater attaches coverage to the equipment itself, so protection travels with the asset. For any contractor with more than a few thousand dollars in mobile gear, it’s the policy that keeps a single theft or accident from ending the business.

How the Coverage Follows Your Equipment

Most floaters are written on an all-risk basis, sometimes called open perils. The policy covers any direct physical loss or damage unless a specific exclusion says otherwise, which flips the burden: you don’t have to prove the loss matches a listed peril, the insurer has to show an exclusion applies. The alternative, a named perils policy, only covers hazards explicitly listed in the contract such as fire, theft, or windstorm. All-risk costs more and is far more practical for construction work, where the next loss is rarely the one you predicted.

Standard commercial property forms typically won’t cover equipment once it leaves your primary premises. A bulldozer parked at a staging area across town, a generator riding on a flatbed, or a laser level sitting in a job-site trailer are all exposed under a typical property policy. The floater closes that gap. Coverage stays active at job sites, in transit on public roads, at temporary storage yards, and anywhere else the equipment ends up within the United States, its territories, and Canada.

What Equipment Qualifies

These policies cover a broad range of assets, from earth-moving machines like bulldozers, excavators, and backhoes down to handheld power tools, pneumatic drills, concrete mixers, and surveying instruments. The common thread is that the property is mobile and used in your contracting operations.

Coverage isn’t limited to equipment you own. Most floaters can extend to machinery you lease, rent, or borrow, which matters because rental agreements almost always include indemnification clauses requiring the renter to insure the equipment. If you damage a rented skid steer without floater coverage, you’re personally on the hook for replacement cost, and the rental company may add a breach-of-contract claim on top of the repair bill. Policies sometimes impose sublimits or extra conditions on non-owned equipment, so confirm how yours handles rented and borrowed gear before signing the rental paperwork.

Scheduled Items vs. Blanket Limits

Insurers typically use two approaches within the same policy. High-value machines like cranes, excavators, and paving equipment are individually scheduled, meaning each piece is listed by make, model, serial number, and a specific insured value. If you lose a scheduled excavator insured at $180,000, that’s the ceiling for that item.

Smaller tools and accessories usually fall under a blanket limit, a single pool of coverage shared across all unscheduled items. You might carry $50,000 in blanket coverage for hand tools, saw blades, extension cords, and similar gear. The blanket approach avoids listing every $200 angle grinder, but a large-scale theft of small tools can exhaust the limit quickly. A current inventory is the only way to set that limit high enough to actually cover what you own.

How the Insurer Values a Loss

Payouts depend on the valuation basis in your policy. Actual cash value (ACV) pays what the equipment was worth at the time of loss, accounting for depreciation. A five-year-old track loader that cost $90,000 new might produce only a $55,000 ACV payout. Replacement cost value (RCV) pays what it costs to buy a new equivalent model, regardless of the lost item’s age or condition.

RCV coverage costs more, and for older fleets where the gap between depreciated value and new-equipment pricing is wide, the premium difference can be substantial. For newer equipment, the gap narrows. If most of your machines are paid off and aging, an ACV payout can leave you tens of thousands short of replacement, which is often what tips the decision toward RCV.

What a Floater Does Not Cover

Even an all-risk floater has boundaries. The ISO contractors equipment form and most proprietary insurer forms exclude the same core categories, and knowing them up front prevents unpleasant surprises at claim time.

  • Mechanical breakdown. If an engine seizes or a hydraulic pump fails during normal operation, that’s a maintenance issue. The policy isn’t a warranty.
  • Wear, rust, and corrosion. Gradual deterioration from age and use is excluded.
  • Employee theft. Theft by someone you’ve entrusted with the equipment is excluded. If your own operator drives off with a skid steer, the floater won’t pay. Theft by outside parties is covered.
  • Voluntary parting. Being tricked into handing over equipment through a scam or fraudulent scheme is excluded.
  • War, government seizure, and nuclear hazard. Standard across virtually all property and inland marine forms.
  • Intentional damage. Deliberate damage results in denial and can trigger a fraud investigation.
  • Latent defects. A hidden manufacturing flaw is the manufacturer’s problem.
  • Neglect. Failing to take reasonable steps to protect equipment after a loss, such as leaving a damaged machine exposed when you could have tarped it, can defeat the claim.

The employee theft exclusion catches many contractors off guard. It applies around the clock and reaches anyone you’ve entrusted with the equipment, whether they act alone or with an accomplice. The usual exception is equipment in the care of a commercial carrier, since you have less control over a trucking company’s employees than your own.

Flood and Earthquake

Flood and earthquake are handled inconsistently. Some policies exclude both entirely; others cover them with a separate, higher deductible. In coastal areas, windstorm may carry its own percentage-based deductible instead of the flat dollar amount that applies to other perils. If you work in flood zones or seismically active regions, ask specifically whether these perils are covered and what the deductible looks like.

Pollution Cleanup

When covered equipment is damaged and leaks diesel, hydraulic fluid, or other contaminants, some policies include a sublimit for pollutant cleanup and removal. The sublimit is usually modest compared to real remediation costs, so if your projects run near waterways or sensitive sites, know the cap and consider supplemental environmental coverage.

Deductibles and Theft Prevention

Floater deductibles aren’t one-size-fits-all. Policies commonly assign different amounts by type of equipment or type of peril. A policy might carry a $5,000 or $10,000 deductible for most losses but impose $25,000 for cranes or asphalt plants. Flood and earthquake losses, where available, often carry their own higher deductibles or percentage-based deductibles tied to insured value.

A higher deductible lowers your premium but means absorbing more of each loss. Contractors with strong safety records and secure storage often take higher deductibles to cut annual premium.

Construction equipment theft costs the industry between $300 million and $1 billion annually, and only about 20 to 30 percent of stolen equipment is ever recovered. That’s why theft prevention weighs heavily in how underwriters price floaters. GPS tracking is the single most impactful measure: real-time location monitoring dramatically improves recovery odds. Some insurers partner with equipment registration databases that let law enforcement identify a machine’s owner around the clock, and contractors who register their equipment and install GPS tracking may qualify for a theft deductible waiver that eliminates the deductible (up to a set amount) if registered equipment is stolen and not recovered, provided the theft was reported to police. Beyond GPS, underwriters look at fenced and locked storage yards, well-lit staging areas, ignition kill switches, and key-access logs. You won’t always see a line-item discount for each measure, but collectively they shape your risk profile and the premium you’re quoted.

The 30-Day Window on New Purchases

Most floaters include automatic coverage for equipment you buy mid-policy. The standard grace period is 30 days from acquisition, during which the new machine is covered without prior notice. After 30 days, you must report the acquisition and pay any additional premium from the purchase date for coverage to continue.

The grace period usually comes with a sublimit lower than your overall policy limit. If you buy a $400,000 crane but your automatic acquisition sublimit is $250,000, you’re underinsured from day one unless you notify the insurer right away. For any major purchase, don’t lean on the grace period. Call your broker the same week you take delivery and get the equipment scheduled at its full value.

What You Need to Get a Quote

The foundation of any floater is the equipment schedule, a detailed inventory of every significant machine you want insured. For each item, provide:

  • Make, model, and year. Basic identification that drives replacement cost and parts availability.
  • Serial number or VIN. Found on the manufacturer’s plate, usually on the frame. This is what the insurer uses to verify identity during a claim.
  • Date of acquisition and purchase price, including taxes and delivery fees. This sets the baseline for valuation.
  • Current condition and any modifications. Aftermarket attachments or upgrades that increase value have to be documented or they won’t be covered.

Putting this in a spreadsheet before approaching a broker speeds up underwriting considerably. Serial number discrepancies are one of the most common reasons claims get delayed or disputed, so verify every number against the physical plate on the machine, not just old paperwork. For blanket items like hand tools, a total estimated value grouped by category is usually enough.

Underwriters also evaluate your risk profile beyond the equipment list. They look at the types of projects you take on, where you operate, your claims history over the past three to five years, how you store equipment overnight, and your security measures. A contractor parking excavators on open lots in high-theft areas will pay more than one storing them behind fenced, camera-monitored yards.

When Something Happens

If equipment is damaged, destroyed, or stolen, notify your insurer or broker as quickly as possible. Policies typically require notice “as soon as practicable” or within a specific window. Late reporting can reduce the payout or trigger denial, so don’t wait until the project wraps up to mention a generator went missing three weeks ago.

Preserve the evidence. Don’t repair or move damaged equipment until an adjuster has inspected it, unless emergency action is needed to prevent further damage, like shutting off a fuel leak. Photograph everything from multiple angles. Then build your documentation:

  • An itemized loss list with every damaged or stolen item, including make, model, serial number, purchase date, and purchase price.
  • Supporting records: original purchase receipts, the equipment schedule from your policy, maintenance logs, and any pre-loss photos.
  • At least one written repair estimate from a qualified shop, provided to the adjuster.
  • A running expense log covering every cost caused by the loss, including temporary rentals, emergency repairs, and project delays.

For theft, file a police report immediately. Most policies require one, and theft deductible waivers tied to equipment registration programs are explicitly conditioned on it. The adjuster will also check whether the stolen equipment was on your policy schedule and whether the serial numbers match, which is why accurate record-keeping has to be in place before any loss.

Subrogation and Waivers in Your Contracts

If someone else caused the damage, your insurer can pursue that party for reimbursement after paying your claim. That’s subrogation. If a delivery truck backs into your excavator at a site and the driver’s employer is at fault, your floater pays you and your insurer then goes after the trucking company’s liability carrier. The insurer’s recovery is capped at the amount it paid you.1National Association of Insurance Commissioners. How’s the Recovery? Salvage and Subrogation in the Property Liability Insurance Industry Successful subrogation can sometimes mean your deductible is refunded, so if the insurer recovers the full loss from the at-fault party, you may get the deductible back.

One wrinkle matters at the contract-signing stage. If your contract with another party includes a waiver of subrogation clause, your insurer loses the right to pursue that party. General contractors frequently require subcontractors to waive subrogation as a condition of the contract. Before agreeing, make sure your floater allows it through a waiver-of-subrogation endorsement. The endorsement usually costs a small additional premium and prevents a coverage conflict that would otherwise leave you in breach of your contract.1National Association of Insurance Commissioners. How’s the Recovery? Salvage and Subrogation in the Property Liability Insurance Industry